View source for Electroactive polymers

[[Image:EAP-example2.png|300px|thumb|'''Figure 1''': Cartoon drawing of an EAP gripping device. (a) A voltage is applied and the EAP fingers deform in order to surround the ball. (b) When the voltage is removed the EAP fingers return to their original shape and grip the ball. (c) ]]'''Electroactive Polymers''', or EAPs, are [[polymer]]s that exhibits a change in size or shape when stimulated by an [[electric field]]. The most common applications of this type of material are in [[actuator]]s and [[sensor]]s. A typical characteristic property of an EAP is that they will undergo a large amount of deformation while sustaining large [[force]]s. The majority of historic actuators are made of [[ceramic]] [[piezoelectric]] materials. While these materials are able to withstand large forces, they commonly will only deform a fraction of a [[percent]]. In the late 1990s, it has been demonstrated that some EAPs can exhibit up to a 380% [[strain (mechanics)|strain]] <ref name=ArtificialMuscles> {{cite web|url=http://trs-new.jpl.nasa.gov/dspace/bitstream/2014/37602/1/05-1898.pdf|title=Bar-Cohen, Yoseph "Artificial Muscles using Electroactive Polymers (EAP): Capabilities, Challenges and Potential}} </ref>, which is much more than any ceramic actuator. Another one of the most common applications for EAPs is in the field of [[robotics]] in the development of artificial muscles. Due to this being one of the most common and attractive applications, EAPs are often referred to as artificial muscles. A cartoon drawing of a gripping device using EAPs as "fingers" to grip a ball is depicted in Figure 1.

==History of EAPs==
The field of EAPs emerged back in 1880, when [[Wilhelm Roentgen]] designed an experiment in which he tested the effect of an [[electrical current]] on the mechanical properties of a [[rubber band]]<ref name=ElectrochemistryEncyclopedia> {{cite web|url=http://electrochem.cwru.edu/encycl/art-p02-elact-pol.htm|title=Electrochemistry Encyclopedia: Electroactive Polymers (EAP)}} </ref>. The rubber band was fixed at one end and was attached to a [[mass]] at the other. It was then charged and discharged to study the change in length with [[electrical current]]. Sacerdote followed up on Roentgen’s experiment by formulating a theory on strain response to an applied [[electric field]] in 1899<ref name=ElectrochemistryEncyclopedia></ref>. It wasn’t until the year 1925 that the first [[piezoelectric]] polymer was discovered ([[Electret]]). Electret was formed by combining [[carnauba wax]], [[rosin]] and [[beeswax]], and then cooling the solution while it is subject to an applied [[Direct Current|DC]] [[electrical bias]]. The mixture would then solidify into a polymeric material that exhibited a piezoelectric effect.

Polymers that respond to environmental conditions other than an applied [[electrical current]] have also been a large part of this area of study. In 1949, Katchalsky et. al. demonstrated that when [[collagen]] filaments are dipped in [[acid]] or [[alkali]] solutions they would respond with a change in [[volume]]<ref name=ElectrochemistryEncyclopedia></ref>. The collagen filaments were found to expand in an [[acidic]] solution and contract in an [[alkali]] solution. Although other stimuli (such as pH) have been investigated, due to its ease and practicality most research has been devoted to developing polymers that respond to electrical stimuli in order to mimic biological systems.

It wasn’t until the late 1960s when the next major breakthrough in EAPs was observed. In 1969, Kawai was able to demonstrate that [[polyvinylidene fluoride]] (PVDF) exhibits a large piezoelectric effect<ref name=ElectrochemistryEncyclopedia></ref>. This sparked research interest in developing other polymers systems that would show a similar effect. In 1977, the first electrically [[conducting polymer]]s were discovered by [[Hideki Shirakawa]] et.al <ref name=EAPHistory>{{cite journal|author=Finkenstadt,Victoria L.|journal=Appl Microbiol Biotechnol|year=2005|volume=67|pages=735-745}}{{ doi|10.1007/s00253-005-1931-4}}</ref>. Shirakawa along with [[Alan MacDiarmid]] and [[Alan Heeger]] demonstrated that [[polyacetylene]] was electrically conductive, and that by doping it with [[iodine]] vapor, they could enhance its [[electrical conductivity|conductivity]] by 8 orders of magnitude. Thus the [[electrical conductance|conductance]] was close to that of a metal. By the late 1980s a number of other polymers had been shown to exhibit a [[piezoelectric effect]] or were demonstrated to be conductive.

In the early 1990s, [[ionic polymer-metal composite]]s were developed and shown to exhibit electroactive properties far superior to previous EAPs. The major advantage of IPMCs was that they were able to show activation (deformation) at [[voltage]]s as low as 1 or 2 [[volt]]s<ref name=ElectrochemistryEncyclopedia></ref>. This is orders of magnitude less than any previous EAP. Not only was the activation energy for these materials much lower, but they could also undergo much larger deformations. IMPCs were shown to exhibit anywhere up to 380% strain, orders of magnitude larger than previously developed EAPs<ref name=ArtificialMuscles></ref>. In 1999, one of the pioneers of the field of [[robotics]] and artificial muscles, [[Yoseph Bar-Cohen]], proposed the [[Armwrestling Match of EAP Robotic Arm Against Human]] Challenge<ref name=ElectrochemistryEncyclopedia></ref>. This was a challenge in which research groups around the world competed to design a robotic arm consisting of EAP muscles that could defeat a human in an arm wrestling match. The first challenge was held at the Electroactive Polymer Actuators and Devices Conference in 2005<ref name=ElectrochemistryEncyclopedia></ref>. Another major milestone of the field is that the first commercially developed device including EAPs as an artificial muscle was produced in 2002 by Eamex in [[Japan]]<ref name=ArtificialMuscles></ref>. This device was a fish that is able to swim on its own, moving its tail using an EAP [[muscle]]. But the progress in practical development is not satisfactory, probably due to misleading in fundamental research <ref name=Mistakes>{{cite journal|author=Ali Eftekhari|journal=Chemistry of Materials|year=2010|volume=22|pages=2689}}{{ doi|10.1021/cm903343t}}</ref>.

==Types of Electroactive Polymers==
EAP can have several configurations, but are generally divided in two principal classes: Dielectric and Ionic.

===Dielectric EAPs===
*[[Dielectric elastomers|Dielectric EAPs]], are materials in which actuation is caused by [[electrostatic]] forces between two electrodes which squeeze the polymer. Dielectric elastomers are capable of very high strains and are fundamentally a capacitor that changes its capacitance when a voltage is applied by allowing the polymer to compress in thickness and expand in area due to the electric field. This type of EAP typically requires a large actuation voltage to produce high electric fields (hundreds to thousands of [[volt]]s), but very low [[electrical]] [[power (physics)|power]] consumption. Dielectric EAPs require no power to keep the actuator at a given position. Examples are electrostrictive polymers and [[dielectric elastomers]].

===Ferroelectric Polymers===
[[Ferroelectric polymers|'''Ferroelectric Polymers''']]<ref>"Ferroelectric Properties of Vinylidene Fluoride Copolymers," by T. Furukawa, in ''Phase Transitions'', Vol. '''18''', pp. 143-211 (1989).</ref><ref name ="Polymers">{{cite book |last1= Nalwa |first1= H. |title= Ferroelectric Polymers |edition= First |year= 1995 |publisher= Marcel Dekker, INC. |location= New York |language= English |isbn= 0-8247-9468-0}}</ref> are a group of crystalline polar [[polymers]] that are also [[ferroelectric]], meaning that they maintain a permanent [[electric polarization]] that can be reversed, or switched, in an external [[electric field]]. Ferroelectric polymers, such as [[polyvinylidene fluoride]](PVDF), are used in acoustic transducers and electromechanical actuators because of their inherent [[piezoelectric]] response, and as heat sensors because of their inherent [[pyroelectric]] response<ref name=lovinger>{{cite journal | author=Lovinger, A.J. | journal=Science | year=1983 | volume=220 | pages=1115-1121}}</ref>.
[[image:Polyvinylidene_fluoride.png|right|thumb|Figure 1: Structure of Poly(vinylidene fluoride)]]

=====Electrostrictive Graft Polymers=====
[[image:Electrostrictive_Graft_PolymerII.PNG|thumb|300px|left|Figure 2: Cartoon of an electrostrictive graft polymer.]]

Electrostricive graft polymers consist of flexible backbone chains with branching side chains. The side chains on neighboring backbone polymers cross link and form crystal units. The backbone and side chain crystal units can then form polarized monomers, which contain atoms with partial charges and generate dipole moments, shown in Figure 2<ref name="Electrostrictive Graft">{{cite journal|last=Wang|first=Youqi|coauthors=Changjie Sun, Eric Zhou, Ji Su|date=2004|title=Deformation Mechanisms of Electrostrictive Graft Elastomers|journal=Smart Materials and Structures|publisher=Institute of Physics Publishing|volume=13|pages=1407-1413|issn=S0964-1726(04)86097-X}}</ref>. When an electrical field is applied, a force is applied to each partial charge and causes rotation of the whole polymer unit. This rotation causes electrostrictive strain and deformation of the polymer.

=====Liquid Crystalline Polymers=====
Main-chain liquid crystalline polymers have [[mesogen]]ic groups linked to each other by a flexible spacer. The mesogens within a backbone form the mesophase structure causing the polymer itself to adopt a conformation compatible with the structure of the mesophase. The direct coupling of the liquid crystalline order with the polymer conformation has given main-chain liquid crystalline elastomers a large amount of interest<ref name="LCpol">{{cite journal|last=Ishige|first=Ryohei|coauthors=Masatoshi Tokita, Yu Naito, Chun Ying Zhang, Junji Watanabe|date=January 22, 2008|title=Unusual Formation of Smectic A Structure in Cross-Linked Monodomain Elastomer of Main-Chain LC Polyester with 3-Methylpentane Spacer|journal=Macromolecules|publisher=American Chemical Society|volume=41|issue=7|pages=2671-2676|issn=10.1021.ma702686c}}</ref>. The synthesis of highly oriented elastomers leads to have a large strain thermal actuation along the polymer chain direction with temperature variation resulting in unique mechanical properties and potential applications as mechanical actuators.

===Ionic EAPs===
*[[Ion]]ic EAPs, in which actuation is caused by the displacement of ions inside the polymer. Only a few volts are needed for actuation, but the ionic flow implies a higher electrical power needed for actuation, and energy is needed to keep the actuator at a given position. Examples of ionic EAPS are [[conductive polymer]]s, [[ionic polymer-metal composite]]s (IPMCs), and responsive gels. Yet another example is a Bucky gel actuator, which is a polymer-supported layer of [[polyelectrolyte]] material consisting of an [[ionic liquid]] sandwiched between two [[electrode]] layers consisting of a [[gel]] of ionic liquid containing single-wall [[carbon nanotube]]s <ref>{{cite journal|author=Qu, L., Peng, Q., Dai, L., Spinks, G.M., Wallace, G.G., Baughman, R.H.|journal=MRS Bulletin|year=2008|volume=33|pages=215-224}}{{ ISSN|0883-7694}}</ref>. As the name implies, these gel actuators can also be made with [[bucky ball]]s instead of nanotubes<ref>[http://www3.interscience.wiley.com/cgi-bin/abstract/110429473/ABSTRACT''Fully Plastic Actuator through Layer-by-Layer Casting with Ionic-Liquid-Based Bucky Gel''] Takanori Fukushima, Kinji Asaka, Atsuko Kosaka, Takuzo Aida p. Angewandte Chemie International Edition Volume 44, Issue 16 2410 2005</ref>.

=====Electrorheological Fluid=====
Main Article: [[Electrorheological Fluid]]

[[Image:EAP-composite.png|300px|thumb|Center| Figure 3: The cations in the ionic polymer-metal composite are randomly oriented in the absence of an electric field. Once a field is applied the cations gather to the side of the polymer in contact with the anode causing the polymer to bend.]]

Electrorheological fluids change the viscosity of a solution with the application of an electric field. The fluid is a suspension of polymers in a low dielectric-constant liquid<ref name="Polymer Rheology">{{cite book|last=Glass|first=J. Edward|coauthors=Schulz, Donald N., Zukosi, C.F|title=Polymers as Rheology Modifiers|publisher=Americal Chemical Society|date=May 13, 1991|series=ACS Symposium Series|volume=462|pages=2-17|chapter=1|isbn=0091-6156/91/0462-0002|accessdate=April 6, 2010}}</ref>. With the application of a large electric field the viscosity of the suspension increases. Potential applications of these fluids include shock absorbers, engine mounts and acoustic dampers<ref name="Polymer Rheology"></ref>.

=====Ionic polymer-metal composite=====
{{Main|Ionic polymer-metal composite}}

Ionic polymer-metal composites consist of a thin ionomeric membrane with noble metal electrodes plated on its surface. It also has cations to balance the charge of the anions fixed to the polymer backbone<ref name="IPM composites">{{cite book|last=Nemat-Nasser|first=S.|coauthors=Thomas, C.|title=Electroactive Polymer (EAP) Actuators as Articifial Muscles-Reality, Potential and Challenges|editor=Yoseph Bar-Cohen|publisher=SPIE Press|date=2001|pages=139-191|chapter=6}}</ref>. They are very active [[actuators]] that show very high deformation at low applied voltage and show low impedance. Ionic polymer-metal composites work through electrostatic attraction between the cationic counter ions and the anode of the applied electric field, a schematic representation is shown in Figure 3. These types of polymers show the greatest promise for bio-mimetic uses as collagen fibers are essentially composed of natural charged ionic polymers<ref name="IPMC">{{cite web|url=http://ndeaa.jpl.nasa.gov/nasa-nde/papers/spie98/SPIE98-mo.PDF|title=Ionic Polymer-Metal Composties (IPMC) As Biomimetic Sensors and Actuators|last=Shahinpoor|first=M.|coauthors=Y. Bar-Cohen, T. Xue, J.O. Simpson, J. Smith|date=5 March 1996|publisher=SPIE|pages=17|accessdate=6 April 2010}}</ref>. Nafion and Flemion are commonly used ionic polymer metal composites<ref>{{cite journal|author=Park, I.S., Jung, K., Kim, D., Kim, S.M, Kim, K.J.|journal=MRS Bulletin|year=2008|volume=33|pages=190-195}}{{ ISSN|0883-7694}}</ref>.

==Comparison of Electronic and Ionic EAPs==
Dielectronic polymers are able to hold their induced displacement while activated under a DC voltage<ref name="Editorial">{{cite journal|last=Bar-Cohen|first=Yoseph|coauthors=Kwang J Kim, Hyouk Ryeol Choi, John D W Madden|date=2007|title=Electroactive Polymer Materials|journal=Smart Materials and Structures|publisher=Institute of Physics Publishing|volume=16|issue=2|issn=doi:10.1088/0964-1726/16/2/E01}}</ref>. This allows dielectronic polymers to be considered for robotic applications. These types of materials also have high mechanical energy density and can be operated in air without a major decrease in performance. However, dielectronic polymers require very high activation fields (>10v/um) that are close to the breakdown level.

The activation of ionic polymers, on the other hand, requires only 1-2 volts. They however need to maintain wetness, though some polymers have been developed as self contained encapsulated activators which allows their use in dry environments<ref name=IPMC></ref>. Ionic polymers also have a low electromechanical coupling. They are however ideal for the bio-mimetic devices.

==Characterization==
While there are many different ways electroactive polymers can be characterized, only three will be addressed here: stress-strain curve, dynamic mechanical thermal analysis, and dielectric thermal analysis.

===Stress-Strain Curve===
Main article: [[Stress-strain curve]]
[[image:LCpolymersII.png|thumb|250px|right|Figure 4: The unstressed polymer spontaneously forms a folded structure, upon application of a stress the polymer regains its original length.]]
Stress strain curves provide information about the polymer’s mechanical properties such as the brittleness, elasticity and yield strength of the polymer. This is done by providing a force to the polymer at a uniform rate and measuring the deformation that results<ref name="Textbook">{{cite book|last=Cowie|first=J.M.G.|coauthors=Valerai Arrighi|title=Polymers: Chemistry and Physics of Modern Material|publisher=CRC Press|location=Florida|date=2008|edition=Third|pages=363-373|chapter=13|isbn=978-0-8493-9813-1}}</ref>. An example of this deformation is shown in Figure 4. This technique is useful for determining the type of material (brittle, tough, etc.), but it is a destructive technique as the stress is increased until the polymer fractures.

===Dynamic mechanical thermal analysis (DMTA)===
Main article: [[Dynamic mechanical analysis]]

Both dynamic mechanical analysis is a non destructive technique that is useful in understanding the mechanism of deformation at a molecular level. In DMTA a sinusoidal stress is applied to the polymer, and based on the polymer’s deformation the [[elastic modulus]] and damping characteristics are obtained (assuming the polymer is a [[damped harmonic oscillator]])<ref name=Textbook></ref>. Elastic materials take the mechanical energy of the stress and convert it into potential energy which can later be recovered. An ideal spring will use all the potential energy to regain its original shape (no dampening), while a liquid will use all the potential energy to flow, never returning to its original position or shape (high dampening). A viscoeleastic polymer will exhibit a combination of both types of behavior<ref name=Textbook></ref>.

===Dielectric thermal analysis (DETA)===
Main article: [[Dielectric thermal analysis]]

DETA is similar to DMTA, but instead of an alternating mechanical force an alternating electric field is applied. The applied field can lead to polarization of the sample, and if the polymer contains groups that have permanent dipoles (as in Figure 2), they will align with the electrical field<ref name= Textbook></ref>. The [[permittivity]] can be measured from the change in amplitude and resolved into dielectric storage and loss components. The [[electric displacement field]] can also be measured by following the current<ref name=Textbook></ref>. Once the field is removed, the dipoles will relax back into a random orientation.

==Applications of EAP==
[[Image:Artificial_Muscle.png|300px|thumb|Figure 5: Cartoon drawing of an arm controlled by EAPs. When a voltage is applied (blue muscles) the polymer expands. When the voltage is removed (red muscles) the polymer returns to its original state.]]EAP materials can be easily manufactured into various shapes due to the ease in processing many polymeric materials, making them very versatile materials. One potential application for EAPs is that they can potentially be integrated into [[microelectromechanical systems]] (MEMS) to produce smart actuators. As the most prospective practical research direction, EAPs have been utilized in artificial muscles<ref>{{cite book|last=Kim|first= K.J.|coauthors= Tadokoro, S.|title=Electroactive Polymers for Robotic Applications, Artificial Muscles and Sensors|publisher=Springer|location=London|date=2007|ISBN=978-1-84628-371-0}}</ref>. Their ability to emulate the operation of biological muscles with high [[fracture toughness]], large actuation strain and inherent vibration damping draw the attention of scientists in this field<ref name=ElectrochemistryEncyclopedia> {{cite web|url=http://electrochem.cwru.edu/encycl/art-p02-elact-pol.htm|title=Electrochemistry Encyclopedia: Electroactive Polymers (EAP)}} </ref>.

In recent years, “electro active polymers for refreshable [[Braille]] displays”<ref name="Electroactive polymers for refreshable Braille displays">{{cite web|url=http://spie.org/x37076.xml?ArticleID=x37076|title=Electroactive polymers for refreshable Braille displays|last=Bar-Cohen|first=Yoseph|date=11 September 2009|publisher=SPIE}}</ref> has emerged to aid the visually impaired in fast reading and computer assisted communication. This concept is based on using an EAP actuator configured in an array form. Rows of [[electrode]]s on one side of an EAP film and columns on the other activate individual elements in the array. Each element is mounted with a Braille dot and is lowered by applying a voltage across the thickness of the selected element, causing local thickness reduction. Under computer control, dots would be activated to create tactile patterns of highs and lows representing the information to be read.

Small pumps can also be achieved by applying EAP materials. These pumps could be used for [[drug delivery]], [[microfluidic device]]s, active flow control, and a multitude of consumer applications. The most likely configuration for a pump based on actuators would be a dual diaphragm device. The advantages that an [[ionomeric]] pump could offer would be low voltage ([[battery (electricity)|battery]]) operation, extremely low noise signature, high system efficiency, and highly accurate control of flow rate<ref name="Electroactive Polymer Pumps">{{cite web|url=http://www.discover-technologies.com/applications.html|title=Electroactive Polymer Pumps|date=7 June 2009|publisher=Discover technologies Inc}}</ref>.

Another technology that can benefit from the unique properties of EAP actuators is optical membranes. Due to their low modulus, the mechanical impedance of the actuators, they are well-matched to common optical [[membrane (selective barrier)|membrane]] materials. Also, a single EAP actuator is capable of generating displacements that range from microns to centimeters. For this reason, these materials can be used for static shape correction and jitter suppression. These actuators could also be used to correct for [[optical aberration]]s due to atmospheric interference<ref name="Adaptive Membrane Optics">{{cite web|url=http://www.discover-technologies.com/applications.html|title=Adaptive Membrane Optics|date=7 June 2009|publisher=Discover technologies Inc}}</ref>.

Since these materials exhibit excellent electroactive character, EAP materials show potential in [[biomimetic]]-robot research, stress sensors and [[acoustics]] field, which will make EAPs become a more attractive study topic in the near future. They have been used for various actuators such as face muscles and arm muscles in humanoid robots.<ref>http://eap.jpl.nasa.gov/ NASA WorldWide Electroactive Polymer Actuators Webhub</ref>

==Future Directions==
The field of EAPs is far from mature, which leaves several issues that still need to be worked on<ref name=ElectrochemistryEncyclopedia> {{cite web|url=http://electrochem.cwru.edu/encycl/art-p02-elact-pol.htm|title=Electrochemistry Encyclopedia: Electroactive Polymers (EAP)}} </ref>. The performance and long-term stability of the EAP should be improved by designing a water [[semipermeable membrane|impermeable]] surface. This will prevent the [[evaporation]] of water contained in the EAP, and also reduce the potential loss of the positive counter ions when the EAP is operating submerged in an [[aqueous]] environment. Improved surface conductivity should be explored using methods to produce a defect-free conductive surface. This could possibly be done using metal vapor deposition or other doping methods. It may also be possible to utilize conductive polymers to form a thick conductive layer. Heat resistant EAP would be desirable to allow operation at higher voltages without damaging the internal structure of the EAP due to the generation of heat in the EAP composite. Development of EAPs in different configurations (e.g., fibers and fiber bundles), would also be beneficial, in order to increase the range of possible modes of motion.

==See also==
* [[Armwrestling Match of EAP Robotic Arm Against Human]]
* [[Pneumatic artificial muscle]]

== References ==
<references/>

==External links==
*[http://eap.jpl.nasa.gov/ EAP Webhub]
*[http://www.artificialmuscle.com Artificial Muscle, inc. - High Volume Manufacturer - Dielectric Elastomer]
*[http://www.strategicpolymers.com '''Strategic Polymer Sciences, Inc.'''] - Electroactive Polymer (EAP) - Films - High Energy Density Capacitors - High Strain Actuators
*[http://www.micromuscle.com Micromuscle AB]
*[http://electrochem.cwru.edu/encycl/art-p02-elact-pol.htm Article from YCES electrochemistry encyclopedia]
*[http://www.optotune.com Optotune LLC]
*[http://www.polysep.ucla.edu/Research%20Advances/EAP/electroactive_polymers_as_artifi.htm Electroactive Polymers as Artificial Muscles]
*[http://vimeo.com/5421831 Creepy Concept Videos of EAP´s performing] 
*[http://www.PolyPower.com Danfoss PolyPower]
*[http://newsroom.spie.org/x5394.xml An SPIE article on EAP science and technology]
*[http://plc.cwru.edu/tutorial/enhanced/main.htm Polymers & Liquid Crystals]

[[Category:Electrical engineering]]
[[Category:Smart materials| ]]
[[Category:Transducers]]
[[Category:Polymers]]

[[bg:Електроактивни полимери]]
[[de:Elektroaktive Polymere]]
[[fr:Polymère électroactif]]
[[ja:人工筋肉]]
[[ru:Электроактивные полимеры]]
[[sv:Elektroaktiv polymer]]
[[Category:2Fix]]