View source for Acid dissociation constant

[[File:Acetic-acid-dissociation-3D-balls.png|thumb|305px|alt=Acetic acid, CH<sub>3</sub>COOH, is composed of a methyl group, CH<sub>3</sub>, bound chemically to a carboxylate group, COOH. The carboxylate group can lose a proton and donate it to a water molecule, H<sub>2</sub>0, leaving behind an acetate anion CH<sub>3</sub>COO- and creating a hydronium cation H<sub>3</sub>O<sup> </sup>. This is an equilibrium reaction, so the reverse process can also take place.|[[Acetic acid]], a [[weak acid]], donates a proton (hydrogen ion, highlighted in green) to water in an equilibrium reaction to give the [[acetate]] ion and the [[hydronium]] ion. Red: oxygen, black: carbon, white: hydrogen.]]

An '''acid dissociation constant''', ''K''<sub>a</sub>, (also known as '''acidity constant''', or '''acid-ionization constant''') is a [[Quantitative property|quantitative]] measure of the strength of an [[acid]] in solution. It is the [[equilibrium constant]] for a chemical reaction known as [[Dissociation (chemistry)|dissociation]] in the context of [[acid-base reactions]]. The equilibrium can be written symbolically as:
:HA {{eqm}} A<sup>−</sup> + H<sup>+</sup>,
where HA is a generic [[acid]] that dissociates by splitting into A<sup>−</sup>, known as the [[conjugate base]] of the acid, and the [[hydrogen ion]] or [[proton]], H<sup>+</sup>, which, in the case of aqueous solutions, exists as a solvated [[hydronium ion]]. In the example shown in the figure, HA represents acetic acid, and A<sup>−</sup> the acetate ion. The chemical species HA, A<sup>−</sup> and H<sup>+</sup> are said to be in equilibrium when their concentrations do not change with the passing of time. The dissociation constant is usually written as a quotient of the equilibrium concentrations (in mol/L), denoted by [HA], [A<sup>−</sup>] and [H<sup>+</sup>]:
:<math alt="K_a equals the equilibrium concentration of the deprotonated form A-, times the equilibrium concentration of H+, all divided by the equilibrium concentration of the acid AH." >K_{\mathrm a} = \mathrm{\frac{[A^-] [H^+]}{[HA]}}</math>
{{chemical equilibria}}

Due to the many [[orders of magnitude]] spanned by ''K''<sub>a</sub> values, a [[logarithmic scale|logarithmic]] measure of the acid dissociation constant is more commonly used in practice. p''K''<sub>a</sub>, which is equal to −log<sub>10</sub>&nbsp;''K''<sub>a</sub>, may also be (incorrectly) referred to as an acid dissociation constant:

:<math>\ pK_{\mathrm a} = - \log_{10}K_{\mathrm a}</math>

The larger the value of p''K''<sub>a</sub>, the smaller the extent of dissociation. A [[weak acid]] has a p''K''<sub>a</sub> value in the approximate range −2 to 12 in water. Acids with a p''K''<sub>a</sub> value of less than about −2 are said to be [[strong acids]]; a strong acid is almost completely dissociated in aqueous solution, to the extent that the concentration of the undissociated acid becomes undetectable. p''K''<sub>a</sub> values for strong acids can, however, be estimated by theoretical means or by extrapolating from measurements in non-aqueous [[solvent]]s in which the dissociation constant is smaller, such as [[acetonitrile]] and [[dimethylsulfoxide]].

== Theoretical background ==

The acid dissociation constant for an acid is a direct consequence of the underlying [[chemical thermodynamics|thermodynamics]] of the dissociation reaction; the p''K''<sub>a</sub> value is directly proportional to the standard [[Gibbs free energy|Gibbs energy change]] for the reaction. The value of the p''K''<sub>a</sub> changes with temperature and can be understood qualitatively based on [[Le Chatelier's principle]]: when the reaction is [[endothermic]], the p''K''<sub>a</sub> decreases with increasing temperature; the opposite is true for [[exothermic]] reactions. The underlying structural factors that influence the magnitude of the acid dissociation constant include Pauling's rules for acidity constants, [[inductive effect]]s, [[mesomeric effect]]s, and [[hydrogen bonding]].

The quantitative behaviour of acids and bases in solution can be understood only if their p''K''<sub>a</sub> values are known. In particular, the [[pH]] of a solution can be predicted when the analytical concentration and p''K''<sub>a</sub> values of all acids and bases are known; conversely, it is possible to calculate the equilibrium concentration of the acids and bases in solution when the pH is known. These calculations find application in many different areas of chemistry, biology, medicine, and geology. For example, many compounds used for medication are weak acids or bases, and a knowledge of the p''K''<sub>a</sub> values, together with the [[partition coefficient|water–octanol partition coefficient]], can be used for estimating the extent to which the compound enters the blood stream. Acid dissociation constants are also essential in [[aquatic chemistry]] and [[chemical oceanography]], where the acidity of water plays a fundamental role. In living organisms, [[acid-base homeostasis]] and [[enzyme kinetics]] are dependent on the p''K''<sub>a</sub> values of the many acids and bases present in the cell and in the body. In chemistry, a knowledge of p''K''<sub>a</sub> values is necessary for the preparation of [[buffer solution]]s and is also a prerequisite for a quantitative understanding of the interaction between acids or bases and metal ions to form [[Stability constants of complexes|complexes]]. Experimentally, p''K''<sub>a</sub> values can be determined by potentiometric (pH) [[titration]], but for values of p''K''<sub>a</sub> less than about 2 or more than about 11, [[spectrophotometry|spectrophotometric]] or [[nuclear magnetic resonance|NMR]] measurements may be required due to practical difficulties with pH measurements.

==Definitions==
According to [[Acid-base reaction#Arrhenius definition|Arrhenius]]'s original definition, an acid is a substance that [[Dissociation (chemistry)|dissociates]] in aqueous solution, releasing the hydrogen ion H<sup>+</sup> (a proton):<ref name=Miessler>
{{cite book
 |title=Inorganic Chemistry
 |last=Miessler |first=G.
 |year=1991
 |publisher=Prentice Hall
 |isbn=0134656598
 |edition=2nd
}} Chapter 6: Acid-Base and Donor-Acceptor Chemistry</ref>
:HA {{Eqm}} A<sup>−</sup> + H<sup>+</sup>.
The equilibrium constant for this dissociation reaction is known as a [[dissociation constant]]. The liberated proton combines with a water molecule to give a [[hydronium ion|hydronium (or oxonium) ion]] H<sub>3</sub>O<sup>+</sup>, and so Arrhenius later proposed that the dissociation should be written as an [[acid–base reaction]]:
:HA + H<sub>2</sub>O {{Eqm}} A<sup>−</sup> + H<sub>3</sub>O<sup>+</sup>.
[[Brønsted–Lowry acid-base theory|Brønsted and Lowry]] generalised this further to a proton exchange reaction:<ref>
{{cite book
 |last=Bell |first=R.P.
 |title=The Proton in Chemistry
 |publisher=Chapman & Hall
 |location=London
 |year=1973
 |edition=2nd
}} Includes discussion of many organic Brønsted acids.</ref><ref name=SA>
{{cite book
 |last=Shriver |first=D.F
 |coauthors=Atkins, P.W.
 |title=Inorganic Chemistry
 |edition=3rd
 |year=1999
 |publisher=Oxford University Press
 |location=Oxford
 |isbn=0198503318
}} Chapter 5: Acids and Bases</ref><ref>{{Housecroft3rd}} Chapter 6: Acids, Bases and Ions in Aqueous Solution</ref>
:acid + base {{Eqm}} conjugate base + conjugate acid.
The acid loses a proton, leaving a conjugate base; the proton is transferred to the base, creating a conjugate acid. For aqueous solutions of an acid HA, the base is water; the conjugate base is A<sup>−</sup> and the conjugate acid is the hydronium ion. The Brønsted–Lowry definition applies to other solvents, such as [[dimethyl sulfoxide]]: the solvent S acts as a base, accepting a proton and forming the conjugate acid SH<sup>+</sup>.

In solution chemistry, it is common to use H<sup>+</sup> as an abbreviation for the solvated hydrogen ion, regardless of the solvent. In aqueous solution H<sup>+</sup> denotes a [[hydronium#Solvation|solvated hydronium ion]] rather than a proton.<ref name=Headrick>
{{cite journal
 |last=Headrick |first=J.M.
 |coauthors=Diken, E.G.; Walters, R. S.; Hammer, N. I.; Christie, R.A. ; Cui, J.; Myshakin, E.M.; Duncan, M.A.; Johnson, M.A.; Jordan, K.D.
 |year=2005
 |title=Spectral Signatures of Hydrated Proton Vibrations in Water Clusters
 |journal=Science
 |volume=308
 |pages=1765–69
 |doi=10.1126/science.1113094
 |pmid=15961665
 |issue=5729
}}</ref><ref name=Smiechowski>
{{cite journal
 |last=Smiechowski |first=M.
 |coauthors=Stangret, J.
 |year=2006
 |title=Proton hydration in aqueous solution: Fourier transform infrared studies of HDO spectra
 |journal=J. Chem. Phys.
 |volume=125
 |pages=204508–204522
 |doi=10.1063/1.2374891
 |pmid=17144716
 |issue=20
}}</ref>

The designation of an acid or base as "conjugate" depends on the context. The conjugate acid BH<sup>+</sup> of a base B dissociates according to
:BH<sup>+</sup> + OH<sup>−</sup> {{Eqm}} B + H<sub>2</sub>O
which is the reverse of the equilibrium
:H<sub>2</sub>O (acid) + B (base) {{Eqm}} OH<sup>−</sup> (conjugate base) + BH<sup>+</sup> (conjugate acid).
The [[hydroxide ion]] OH<sup>−</sup>, a well known base, is here acting as the conjugate base of the acid water. Acids and bases are thus regarded simply as donors and acceptors of protons respectively.

Water is [[amphiprotic]]: it can react as an acid or a base. Another example of an amphiprotic molecule is the [[bicarbonate|bicarbonate ion]] HCO<sub>3</sub><sup>−</sup> that is the conjugate base of the [[carbonic acid|carbonic acid molecule]] H<sub>2</sub>CO<sub>3</sub> in the equilibrium
:H<sub>2</sub>CO<sub>3</sub> + H<sub>2</sub>O {{Eqm}} HCO<sub>3</sub><sup>−</sup> + H<sub>3</sub>O<sup>+</sup>
but also the conjugate acid of the [[carbonate|carbonate ion]] CO<sub>3</sub><sup>2−</sup> in (the reverse of) the equilibrium
:HCO<sub>3</sub><sup>−</sup> + OH<sup>−</sup> {{eqm}} CO<sub>3</sub><sup>2−</sup> + H<sub>2</sub>O.
[[Carbonic acid]] equilibria are important for [[acid-base homeostasis]] in the human body.

A broader definition of acid dissociation includes [[hydrolysis]], in which protons are produced by the splitting of water molecules. For example, [[boric acid]] (B(OH)<sub>3</sub>) acts as a weak acid, even though it is not a proton donor, because of the hydrolysis equilibrium
:B(OH)<sub>3</sub> + 2 H<sub>2</sub>O {{eqm}} B(OH)<sub>4</sub><sup>−</sup> + H<sub>3</sub>O<sup>+</sup>.
Similarly, [[hydrolysis#Hydrolysis of metal aqua ions|metal ion hydrolysis]] causes ions such as <span style="white-space:nowrap;">[Al(H<sub>2</sub>O)<sub>6</sub>]<sup>3+</sup></span> to behave as weak acids:<ref name=Burgess>
{{cite book
 |title=Metal Ions in Solution
 |last=Burgess |first=J.
 |year=1978
 |publisher=Ellis Horwood
 |isbn=0853120277
}} Section 9.1 "Acidity of Solvated Cations" lists many p''K''<sub>a</sub> values.</ref>
:[Al(H<sub>2</sub>O)<sub>6</sub>]<sup>3+</sup> +H<sub>2</sub>O {{eqm}} [Al(H<sub>2</sub>O)<sub>5</sub>(OH)]<sup>2+</sup> + H<sub>3</sub>O<sup>+</sup>.

==Equilibrium constant==
An acid dissociation constant is a particular example of an [[equilibrium constant]]. For the specific equilibrium between a [[monoprotic acid]], HA and its conjugate base A<sup>−</sup>, in water,
:HA + H<sub>2</sub>O {{eqm}} A<sup>−</sup> + H<sub>3</sub>O<sup>+</sup>
the thermodynamic equilibrium constant, ''K''<sup>[[File:StrikeO.png]]</sup> can be defined by<ref name=rr>
{{cite book
 |title=The Determination of Stability Constants
 |last=Rossotti |first=F.J.C.
 |coauthors=Rossotti, H.
 |year=1961
 |publisher=McGraw–Hill
}} Chapter 2: Activity and Concentration Quotients</ref>
:<math alt="K standard is a ratio involving the chemical activities of the four species in equilibrium. The numerator of the ratio holds the activity of the deprotonated acid A minus, times that of the hydronium ion H 3 O +. The denominator holds the activity of the acid A H, times that of water, H 2 O." >K^{\ominus} =\mathrm{\frac{\{A^-\} \{H_3O^+\}} {\{HA\} \{H_2O\}}}</math>
where {A} is the [[activity (chemistry)|activity]] of the chemical species A etc. ''K''<sup>[[File:StrikeO.png]]</sup> is [[dimensionless]] since activity is dimensionless. Activities of the products of dissociation are placed in the numerator, activities of the reactants are placed in the denominator. See [[activity coefficient]] for a derivation of this expression.
[[File:PK acetic acid.png|thumb|200px|alt=Illustration of the effect of ionic strength on the p K A of an acid. In this figure, the p K A of acetic acid decreases with increasing ionic strength, dropping from 4.8 in pure water (zero ionic strength) and becoming roughly constant at 4.45 for ionic strengths above 1 molar sodium nitrate, N A N O 3.|Variation of p''K''<sub>a</sub> of acetic acid with ionic strength]]

Since activity is the product of [[concentration]] and [[activity coefficient]] (γ) the definition could also be written as
:<math alt="K standard can be written equivalently as the product of two ratios. The first ratio involves four chemical concentrations, whereas the second ratio involves four activity coefficients. The numerator of the first ratio holds the concentration of the deprotonated acid A minus, times that of the hydronium ion H 3 O +, whereas its denominator holds the concentration of the acid A H, times that of water, H 2 O. The second ratio has the same form as the first, with activity coefficients in place of concentrations. This second ratio is abbreviated by a capital Gamma." >K^{\ominus} = \mathrm{\frac{[A^-] [H_3O^+]}{[HA] [H_2O]}\times \frac{\gamma_{A^-}\gamma_{H_3O^+}}{\gamma_{HA}\gamma_{H_2O}} =\mathrm{\frac{[A^-] [H_3O^+]}{[HA] [H_2O]}}\times\Gamma}</math>
where [HA] represents the concentration of HA and Γ is a quotient of activity coefficients.

To avoid the complications involved in using activities, dissociation constants are [[Determination of equilibrium constants|determined]], where possible, in a medium of high [[ionic strength]], that is, under conditions in which Γ can be assumed to be always constant.<ref name=rr/> For example, the medium might be a solution of 0.1&nbsp;M [[sodium nitrate]] or 3&nbsp;M [[potassium perchlorate]] (1&nbsp;M&nbsp;=&nbsp;1&nbsp;mol·dm<sup>−3</sup>, a unit of [[molar concentration]]). Furthermore, in all but the most concentrated solutions it can be assumed that the concentration of water, [H<sub>2</sub>O], is constant, approximately 55&nbsp;mol·dm<sup>−3</sup>. On dividing ''K''<sup>[[File:StrikeO.png]]</sup> by the constant terms and writing [H<sup>+</sup>] for the concentration of the hydronium ion the expression
:<math alt="K A equals the equilibrium concentration of the deprotonated acid A minus, times the equilibrium concentration of H +, all divided by the equilibrium concentration of the protonated acid A H." >K_{\mathrm a} = \mathrm{\frac{[A^-] [H^+]}{[HA]}}</math>
is obtained. This is the definition in common use.<ref name=IUPAC-NMR>
{{cite journal
 |last=Popov |first=K.
 |coauthors=Ronkkomaki, H.; Lajunen, L.H.J.
 |year=2006
 |title=Guidelines for NMR Measurements for Determination of High and Low pK<sub>a</sub> Values
 |url=http://media.iupac.org/publications/pac/2006/pdf/7803x0663.pdf
 |format=PDF|journal=Pure Appl. Chem.
 |volume=78
 |issue=3
 |pages=663–675
 |doi=10.1351/pac200678030663
}}</ref> p''K''<sub>a</sub> is defined as −log<sub>10</sub> ''K''<sub>a</sub>.
Note, however, that all published dissociation constant values refer to the specific ionic medium used in their determination and that different values are obtained with different conditions, as shown for [[acetic acid]] in the illustration above. When published constants refer to an ionic strength other than the one required for a particular application, they may be adjusted by means of specific ion theory (SIT) and other theories.<ref>
{{cite web
 |url=http://www.iupac.org/web/ins/2000-003-1-500
 |title=Project: Ionic Strength Corrections for Stability Constants
 |publisher=International Union of Pure and Applied Chemistry
 |accessdate=2008-11-23
}}</ref>

Although ''K''<sub>a</sub> appears to have the [[Dimensional analysis|dimension]] of concentration it must in fact be dimensionless or it would not be possible to take its [[logarithm]]. The illusion is the result of omitting the constant term [H<sub>2</sub>O] from the defining expression. Nevertheless it is not unusual, particularly in texts relating to biochemical equilibria, to see a value quoted with a dimension as, for example, "''K''<sub>a</sub> = 300&nbsp;M".

===Monoprotic acids===
[[File:Weak acid speciation3.png|thumb|200px|right|alt=This figure plots the relative fractions of the protonated form A H of an acid to its deprotonated form, A minus, as the solution p H is varied about the value of the acid's p K A. When the p H equals the p K a, the amounts of the protonated and deprotonated forms are equal. When the p H is one unit higher than the p K A, the ratio of concentrations of protonated to deprotonated forms is 10 to 1. When the p H is two units higher that ratio is 100 to 1. Conversely, when the p H is one or two unit lower than the p K A, the ratio is 1 to ten or 1 to 100. The exact percentage of each form may be determined from the Henderson-Hasselbalch equation.|Variation of the % formation of a monoprotic acid, AH, and its conjugate base, A<sup>−</sup>, with the difference between the pH and the p''K''<sub>a</sub> of the acid]]
After rearranging the expression defining ''K''<sub>a</sub>, and putting pH = −log<sub>10</sub>[H<sup>+</sup>], one obtains
:<math alt="p H equals p K A plus the logarithm (base ten) of a ratio of chemical concentrations, namely the concentration of the protonated form A H divided by that of the deprotonated form A minus." >\mathrm{pH} = \mathrm{p}K_{\mathrm a} + \log\mathrm{\frac{[A^-]}{[HA]}}</math>
This is a form of the [[Henderson–Hasselbalch equation]], from which the following conclusions can be drawn.
* At half-neutralization [AH]/[A<sup>−</sup>] = 1; since log(1) =0 , the pH at half-neutralization is numerically equal to p''K''<sub>a</sub>. Conversely, when pH = p''K''<sub>a</sub>, the concentration of AH is equal to the concentration of A<sup>−</sup>.
* The [[buffer solution|buffer region]] extends over the approximate range p''K''<sub>a</sub> ± 2, though buffering is weak outside the range p''K''<sub>a</sub> ± 1. At p''K''<sub>a</sub> ± 1, [AH]/[A<sup>−</sup>]&nbsp;=&nbsp;10&nbsp;or&nbsp;1/10.
* If the pH is known, the ratio [AH]:[A<sup>−</sup>] may be calculated. This ratio is independent of the analytical concentration of the acid.

In water, measurable p''K''<sub>a</sub> values range from about −2 for a strong acid to about 12 for a very weak acid (or strong base). All acids with a p''K''<sub>a</sub> value of less than −2 are more than 99% dissociated at pH&nbsp;0 (1&nbsp;M acid). This is known as solvent leveling since all such acids are brought to the same level of being ''strong acids'', regardless of their p''K''<sub>a</sub> values. Likewise, all bases with a p''K''<sub>a</sub> value larger than the upper limit are more than 99% ''protonated'' at all attainable pH values and are classified as ''strong bases''.<ref name=SA/>

An example of a strong acid is [[hydrochloric acid]], HCl, which has a p''K''<sub>a</sub> value, estimated from thermodynamic quantities, of −9.3 in water.<ref>
{{cite book
 |title=Inorganic Energetics: An Introduction
 |last=Dasent |first=W.E.
 |year=1982
 |publisher=Cambridge University Press
 |isbn=0521284066
}} Chapter 5</ref> The concentration of undissociated acid in a 1&nbsp;mol·dm<sup>−3</sup> solution will be less than 0.01% of the concentrations of the products of dissociation. Hydrochloric acid is said to be "fully dissociated" in aqueous solution because the amount of undissociated acid is imperceptible. When the p''K''<sub>a</sub> and analytical concentration of the acid are known, the extent of dissociation and pH of a solution of a monoprotic acid can be easily calculated using an [[ICE table]].

A [[buffer solution]] of a desired pH can be prepared as a mixture of a weak acid and its conjugate base. In practice the mixture can be created by dissolving the acid in water, and adding the requisite amount of strong acid or base. The p''K''<sub>a</sub> of the acid must be less than two units different from the target pH.

{{See also|Acid#Monoprotic acids}}

===Polyprotic acids===
[[File:phosphoric3.png|thumb|200px|alt=Acids with more than one ionizable hydrogen atoms are called polyprotic acids, and have multiple deprotonation states, also called species. This image plots the relative percentages of the different protonation species of phosphoric acid H 3 P O 4 as a function of solution p H. Phosphoric acid has three ionizable hydrogen atoms whose p K A's are roughly 2, 7 and 12. Below p H 2, the triply protonated species H 3 P O 4 predominates; the double protonated species H 2 P O 4 minus predominates near p H 5; the singly protonated species H P O 4 2 minus predominates near p H 9 and the unprotonated species P O 4 3 minus predominates above p H 12.|% species' formation as a function of pH]]
[[File:Citric acid speciation.png|thumb|200 px|alt=This image plots the relative percentages of the protonation species of citric acid as a function of p H. Citric acid has three ionizable hydrogen atoms and thus three p K A values. Below the lowest p K A, the triply protonated species prevails; between the lowest and middle p K A, the doubly protonated form prevails; between the middle and highest p K A, the singly protonated form prevails; and above the highest p K A, the unprotonated form of citric acid is predominant.|% species formation calculated with the program HySS for a 10 millimolar solution of citric acid. p''K''<sub>a1</sub>=3.13, p''K''<sub>a2</sub> = 4.76, p''K''<sub>a3</sub>=6.40.]]

Polyprotic acids are acids that can lose more than one proton. The constant for dissociation of the first proton may be denoted as ''K''<sub>a1</sub> and the constants for dissociation of successive protons as ''K''<sub>a2</sub>, etc. [[Phosphoric acid]], H<sub>3</sub>PO<sub>4</sub>, is an example of a polyprotic acid as it can lose three protons.
:{| class="wikitable"
!equilibrium!!p''K''<sub>a</sub> value
|-
| H<sub>3</sub>PO<sub>4</sub> {{eqm}} H<sub>2</sub>PO<sub>4</sub><sup>−</sup> + H<sup>+</sup>
| p''K''<sub>a1</sub> = 2.15
|-
| H<sub>2</sub>PO<sub>4</sub><sup>−</sup> {{eqm}} HPO<sub>4</sub><sup>2−</sup> + H<sup>+</sup>
| p''K''<sub>a2</sub> = 7.20
|-
| HPO<sub>4</sub><sup>2−</sup> {{eqm}} PO<sub>4</sub><sup>3−</sup> + H<sup>+</sup>
| p''K''<sub>a3</sup> = 12.37
|}
When the difference between successive p''K'' values is about four or more, as in this example, each species may be considered as an acid in its own right;<ref>
{{cite book
 |last=Brown |first=T.E.
 |coauthors=Lemay, H.E.; Bursten,B.E.; Murphy, C.; Woodward, P.
 |year=2008
 |title=Chemistry: The Central Science
 |edition=11th
 |location=New York
 |publisher=Prentice-Hall
 |isbn=0136006175
 |page=689
}}</ref> In fact salts of H<sub>2</sub>PO<sub>4</sub><sup>−</sup> may be crystallised from solution by adjustment of pH to about 5.5 and salts of HPO<sub>4</sub><sup>2−</sup> may be crystallised from solution by adjustment of pH to about 10. The species distribution diagram shows that the concentrations of the two ions are maximum at pH 5.5 and 10.

When the difference between successive p''K'' values is less than about four there is overlap between the pH range of existence of the species in equilibrium. The smaller the difference, the more the overlap. The case of citric acid is shown at the right; solutions of citric acid are buffered over the whole range of pH 2.5 to 7.5.

In general, it is true that successive p''K'' values increase (Pauling's first rule).<ref name="pauling">
{{cite book
 |last=Greenwood |first=N.N.
 |coauthor=Earnshaw, A.
 |year=1997
 |title=Chemistry of the Elements
 |edition=2nd
 |location=Oxford
 |publisher=Butterworth-Heinemann
 |isbn=0-7506-3365-4
 |page=50
}}</ref> For example, for a diprotic acid, H<sub>2</sub>A, the two equilibria are

:H<sub>2</sub>A {{eqm}} HA<sup>−</sup> + H<sup>+</sup>
:HA<sup>−</sup> {{eqm}} A<sup>2−</sup> + H<sup>+</sup>

it can be seen that the second proton is removed from a negatively charged species. Since the proton carries a positive charge extra work is needed to remove it; that is the cause of the trend noted above. Phosphoric acid values (above) illustrate this rule, as do the values for [[vanadic acid]], H<sub>3</sub>VO<sub>4</sub>. When an exception to the rule is found it indicates that a major change in structure is occurring. In the case of VO<sub>2</sub><sup>+</sup> (aq), the vanadium is [[octahedral molecular geometry|octahedral]], 6-coordinate, whereas vanadic acid is [[tetrahedral molecular geometry|tetrahedral]], 4-coordinate. This is the basis for an explanation of why p''K''<sub>a1</sub> > p''K''<sub>a2</sub> for vanadium(V) oxoacids.

:{| class="wikitable"
!equilibrium!!p''K''<sub>a</sub> value
|-
| [VO<sub>2</sub>(H<sub>2</sub>O)<sub>4</sub>]<sup>+</sup> {{eqm}} H<sub>3</sub>VO<sub>4</sub> + H<sup>+</sup> + 2H<sub>2</sub>O
| p''K''<sub>a1</sub> = 4.2
|-
| H<sub>3</sub>VO<sub>4</sub> {{eqm}} H<sub>2</sub>VO<sub>4</sub><sup>−</sup> + H<sup>+</sup>
| p''K''<sub>a2</sub> = 2.60
|-
| H<sub>2</sub>VO<sub>4</sub><sup>−</sup> {{eqm}} HVO<sub>4</sub><sup>2−</sup> + H<sup>+</sup>
| p''K''<sub>a3</sub> = 7.92
|-
| HVO<sub>4</sub><sup>2−</sup> {{eqm}} VO<sub>4</sub><sup>3−</sup> + H<sup>+</sup>
| p''K''<sub>a4</sub> = 13.27
|}

===Water self-ionization===
{{main|Self-ionization of water}}
Water has both acidic and basic properties. The equilibrium constant for the equilibrium
:2 H<sub>2</sub>O {{eqm}} OH<sup>−</sup> + H<sub>3</sub>O<sup>+</sup>
is given by
:<math alt="The acidity constant K A for water equals the concentration of H + times that of O H minus divided by the concentration of water, H 2 O." >K_{\mathrm a}=\mathrm{\frac{[H_3O^+] [OH^-]}{[H_2O]^2}}</math>
When, as is usually the case, the concentration of water can be assumed to be constant, this expression may be replaced by

:<math alt="The ionization constant of water K w equals the concentration of H + times the concentration of O H minus." >K_{\mathrm w} =[\mathrm{H_3O}^+] [\mathrm{OH}^-]\,</math>

The value of ''K''<sub>w</sub> at [[Standard conditions for temperature and pressure|STP]] is 1.0×10<sup>−14</sup>. The [[Self-ionization of water|self-ionization]] constant of water, ''K''<sub>w</sub>, is thus just a special case of an acid dissociation constant.

===Bases===
Historically, the equilibrium constant ''K''<sub>b</sub> for a base has been defined as the ''association'' constant for protonation of the base, B, to form the conjugate acid, HB<sup>+</sup>.
:B + H<sub>2</sub>O {{eqm}} HB<sup>+</sup> + OH<sup>−</sup>
Using similar reasoning to that used before
:<math alt="The base association constant K b equals the concentration of the protonated form H B +, times the concentration of the hydroxyl anion O H minus, all divided by the concentration of the base B." >K_{\mathrm b} = \mathrm{\frac{[HB^+] [OH^-]}{[B]}}</math>
<!-- :p''K''<sub>b</sub> = − log<sub>10</sub> ''K''<sub>b</sub> -->

''K''<sub>b</sub> is related to ''K''<sub>a</sub> for the conjugate acid. In water, the concentration of the [[hydroxide]] ion, [OH<sup>−</sup>], is related to the concentration of the hydrogen ion by ''K''<sub>w</sub> = [H<sup>+</sup>] [OH<sup>−</sup>], therefore
:<math alt="The concentration of the hydroxyl anion O H minus equals the ionization constant of water K w divided by the concentration of H +, by the definition of K w." >\mathrm{[OH^-]} = \frac{K_{\mathrm w}}{\mathrm{[H^+]}}</math>
Substitution of the expression for [OH<sup>−</sup>] into the expression for ''K''<sub>b</sub> gives
:<math alt="K b can be written as a ratio of four terms. The numerator holds the concentration of the protonated base H B + times the ionization constant of water K w. The denominator holds the concentration of the base B times that of H +. Using the definition for K A, K b equals K w divided by K A." >K_{\mathrm b} = \frac{[\mathrm{HB^+}]K_{\mathrm w}}{\mathrm{[B] [H^+]}} = \frac{K_{\mathrm w}}{K_{\mathrm a}}</math>

When ''K''<sub>a</sub>, ''K''<sub>b</sub> and ''K''<sub>w</sub> are determined under the same conditions of temperature and ionic strength, it follows, taking [[cologarithm]]s, that p''K''<sub>b</sub> = p''K''<sub>w</sub> − p''K''<sub>a</sub>. In aqueous solutions at 25&nbsp;°C, p''K''<sub>w</sub> is 13.9965,<ref name=crc>
{{cite book
 |title=CRC Handbook of Chemistry and Physics, Student Edition
 |last=Lide |first=D.R.
 |year=2004
 |publisher=CRC Press
 |edition=84th
 |isbn=0849305977
}} Section D–152</ref> so p''K''<sub>b</sub> ~ 14 − p''K''<sub>a</sub>.
In effect there is no need to define p''K''<sub>b</sub> separately from p''K''<sub>a</sub>, but it is done here because p''K''<sub>b</sub> values can be found in the older literature.

===Temperature dependence===
All equilibrium constants vary with [[temperature]] according to the [[van 't Hoff equation]]<ref>
{{cite book
 |title=Physical Chemistry
 |last=Atkins |first=P.W.
 |coauthors=de Paula, J.
 |year=2006
 |publisher=Oxford University Press
 |isbn=0198700725
}} Section 7.4: The Response of Equilibria to Temperature</ref>
:<math alt="The derivative of the natural logarithm of any equilibrium constant K with respect to the [[kelvin|absolute temperature]] T equals the standard enthalpy change for the reaction divided by the product R times T squared. Here R represents the gas constant, which equals the thermal energy per mole per kelvin. The standard enthalpy is written as Delta H with a superscript plimsol mark represented by the image strikeO. This equation follows from the definition of the Gibbs energy Delta G equals R times T times the natural logarithm of K." >\frac {\operatorname{d} \ln K} {\operatorname{d}T} = \frac{{\Delta H}^{\ominus}} {RT^2}</math>
''R'' is the [[gas constant]] and ''T'' is the [[kelvin|absolute temperature]] . Thus, for [[exothermic]] reactions, (the standard [[enthalpy change]], Δ''H''<sup>[[File:StrikeO.png]]</sup>, is negative) ''K'' decreases with temperature, but for [[endothermic]] reactions (Δ''H''<sup>[[File:StrikeO.png]]</sup> is positive) ''K'' increases with temperature.

==Acidity in nonaqueous solutions==
A solvent will be more likely to promote ionization of a dissolved acidic molecule in the following circumstances.<ref name=loudon>{{Loudon}} p. 317–318</ref>
# It is a [[protic solvent]], capable of forming hydrogen bonds.
# It has a high [[donor number]], making it a strong [[Lewis base]].
# it has a high [[dielectric constant]] (relative permittivity), making it a good solvent for ionic species.
p''K''<sub>a</sub> values of organic compounds are often obtained using the aprotic solvents [[dimethyl sulfoxide]] (DMSO)<ref name=loudon/> and [[acetonitrile]] (ACN).<ref>
{{cite book
 |title=Advanced Organic Chemistry
 |last=March |first=J.
 |coauthors=Smith, M.
 |authorlink=Jerry March
 |year=2007
 |publisher=John Wiley & Sons
 |location=New York
 |isbn=978-0-471-72091-1
 |edition=6th
 }} Chapter 8: Acids and Bases</ref>
{| class="wikitable"
|+Solvent properties at 25<sup>o</sup>C
|-
! Solvent !! Donor number<ref name=loudon/>!! Dielectric constant<ref name=loudon/>
|-
|Acetonitrile ||14 ||37
|-
|Dimethylsulfoxide ||30 ||47
|-
|Water ||18 ||78
|}
DMSO is widely used as an alternative to water because it has a lower dielectric constant than water, and is less polar and so dissolves non-polar, [[hydrophobic]] substances more easily. It has a measurable p''K''<sub>a</sub> range of about 1 to 30. Acetonitrile is less basic than DMSO, and, so, in general, acids are weaker and bases are stronger in this solvent. Some p''K''<sub>a</sub> values at 25<sup>o</sup>C for acetonitrile (ACN)<ref>
{{cite journal
 |last=Kütt |first=A.
 |coauthors=Movchun, V.; Rodima, T,; Dansauer, T.; Rusanov, E.B. ; Leito, I.; Kaljurand, I.; Koppel, J.; Pihl, V.; Koppel, I.; Ovsjannikov, G.; Toom, L.; Mishima, M.; Medebielle, M.; Lork, E.; Röschenthaler, G-V.; Koppel, I.A.; Kolomeitsev, A.A.
 |year=2008
 |title=Pentakis(trifluoromethyl)phenyl, a Sterically Crowded and Electron-withdrawing Group: Synthesis and Acidity of Pentakis(trifluoromethyl)benzene, -toluene, -phenol, and -aniline
 |journal=J. Org. Chem.
 |volume=73
 |issue=7
 |pages=2607–2620
 |doi=10.1021/jo702513w
 |pmid=18324831
}}</ref><ref name=Ivo_AN>
{{cite journal
 |last=Kütt |first=A.
 |coauthors=Leito, I.; Kaljurand, I.; Sooväli, L.; Vlasov, V.M.; Yagupolskii, L.M.; Koppel, I.A.
 |year=2006
 |title=A Comprehensive Self-Consistent Spectrophotometric Acidity Scale of Neutral Brønsted Acids in Acetonitrile
 |journal=J. Org. Chem.
 |volume=71
 |issue=7
 |pages=2829–2838
 |doi=10.1021/jo060031y
 |pmid=16555839
}}</ref><ref>
{{cite journal
 |last=Kaljurand |first=I.
 |coauthors=Kütt, A.; Sooväli, L.; Rodima, T.; Mäemets, V. Leito, I; Koppel, I.A.
 |year=2005
 |title=Extension of the Self-Consistent Spectrophotometric Basicity Scale in Acetonitrile to a Full Span of 28 pKa Units: Unification of Different Basicity Scales
 |journal=J. Org. Chem.
 |volume=70
 |issue=3
 |pages=1019–1028
 |doi=10.1021/jo048252w
 |pmid=15675863
}}</ref> and dimethyl sulfoxide (DMSO)<ref>
{{cite web
 |url=http://www.chem.wisc.edu/areas/reich/pkatable/
 |title=Bordwell pKa Table (Acidity in DMSO)
 |accessdate=2008-11-02
}}</ref> are shown in the following tables. Values for water are included for comparison.
{| class="wikitable"
|+ p''K''<sub>a</sub> values of acids
|-
!HA {{Eqm}} A<sup>−</sup> + H<sup>+</sup>!! ACN !! DMSO!!water
|-
|[[p-Toluenesulfonic acid|''p''-Toluenesulfonic acid]]||8.5||0.9||strong
|-
|[[2,4-Dinitrophenol]]||16.66||5.1||3.9
|-
|[[Benzoic acid]]||21.51||11.1||4.2
|-
|[[Acetic acid]]||23.51 ||12.6||4.756
|-
|[[Phenol]] ||29.14 ||18.0||9.99
|-
<!-- |}

{| class="wikitable" align="center"
|+ p''K''<sub>a</sub> values of acids conjugate to bases
|- -->
!BH<sup>+</sup> {{Eqm}} B + H<sup>+</sup>
|-
|[[Pyrrolidine]]||19.56||10.8||11.4
|-
|[[Triethylamine]]||18.82||9.0||10.72
|-
|[[Proton sponge]]{{nbsp|11}}||18.62||7.5||12.1
|-
|[[Pyridine]]||12.53||3.4||5.2
|-
|[[Aniline]]||10.62||3.6||9.4
|}

<!-- The extra line is needed for correct alignment -->
Ionization of acids is less in an acidic solvent than in water. For example, [[hydrogen chloride]] is a weak acid when dissolved in [[acetic acid]]. This is because acetic acid is a much weaker base than water.
:HCl + CH<sub>3</sub>CO<sub>2</sub>H {{eqm}} Cl<sup>−</sup> + CH<sub>3</sub>C(OH)<sub>2</sub><sup>+</sup>
: acid + base {{eqm}} conjugate base + conjugate acid
Compare this reaction with what happens when acetic acid is dissolved in the more acidic solvent pure sulfuric acid<ref>{{Housecroft3rd}} Chapter 8: Non-Aqueous Media</ref>
:H<sub>2</sub>SO<sub>4</sub> + CH<sub>3</sub>CO<sub>2</sub>H {{eqm}} HSO<sub>4</sub><sup>−</sup> + CH<sub>3</sub>C(OH)<sub>2</sub><sup>+</sup>
The unlikely [[diol|geminal diol]] species CH<sub>3</sub>C(OH)<sub>2</sub><sup>+</sup> is stable in these environments. For aqueous solutions the [[pH]] scale is the most convenient [[acidity function]].<ref>
{{cite book
 |title=Acidity Functions
 |last=Rochester |first=C.H.
 |year=1970
 |publisher=Academic Press
 |isbn=0125908504
}}</ref> Other acidity functions have been proposed for non-aqueous media, the most notable being the [[Hammett acidity function]], ''H''<sub>0</sub>, for [[superacid]] media and its modified version ''H''<sub>−</sub> for [[superbase|superbasic]] media.<ref>
{{cite book
 |last=Olah |first=G.A
 |coauthors=Prakash, S; Sommer, J
 |title=Superacids
 |publisher=Wiley Interscience
 |location=New York
 |year=1985
 |isbn=0471884693
}}</ref>

[[File:Carboxylic acid dimers.png|thumb|alt=This image illustrates how two carboxylic acids, C O O H, can associate through mutual hydrogen bonds. The hydroxyl portion O H of each molecule forms a hydrogen bond to the carbonyl portion C O of the other.|Dimerization of a carboxylic acid]]
In aprotic solvents, [[oligomer]]s, such as the well-known acetic acid [[Dimer (chemistry)|dimer]], may be formed by hydrogen bonding. An acid may also form hydrogen bonds to its conjugate base. This process, known as [[homoconjugation]], has the effect of enhancing the acidity of acids, lowering their effective p''K''<sub>a</sub> values, by stabilizing the conjugate base. Homoconjugation enhances the proton-donating power of toluenesulfonic acid in acetonitrile solution by a factor of nearly 800.<ref>
{{cite journal
 |last=Coetzee |first=J.F.
 |coauthors=Padmanabhan, G.R.
 |title=Proton Acceptor Power and Homoconjugation of Mono- and Diamines
 |journal=J. Amer. Chem. Soc.
 |year=1965
 |volume=87
 |pages=5005–5010
 |doi=10.1021/ja00950a006
}}</ref> In aqueous solutions, homoconjugation does not occur, because water forms stronger hydrogen bonds to the conjugate base than does the acid.

===Mixed solvents===
[[File:Acetic acid pK dioxane water.png|thumb|alt=The p K A of acetic acid in the mixed solvent dioxane/water. p K A increases as the proportion of dioxane increases, primarily because the dielectric constant of the mixture decreases with increasing doxane content. A lower dielectric constant disfavors the dissociation of the uncharged acid into the charged ions, H + and C H 3 C O O minus, shifting the equilibrium to favor the uncharged protonated form C H 3 C O O H. Since the protonated form is the reactant not the product of the dissociation, this shift decreases the equilibrium constant K A, and increases P K A, its negative logarithm.|p''K''<sub>a</sub> of acetic acid in dioxane/water mixtures. Data at 25<sup>o</sup>C from Pine ''et al.''<ref>{{cite journal
 |title=Organic chemistry
 |last=Pine |first=S.H.
 |coauthors=Hendrickson, J.B.; Cram, D.J.; Hammond, G.S.
 |year=1980
 |publisher=McGraw–Hill
 |isbn=0070501157
 |page=203
}}</ref>]]
When a compound has limited solubility in water it is common practice (in the pharmaceutical industry, for example) to determine p''K''<sub>a</sub> values in a solvent mixture such as water/[[dioxane]] or water/[[methanol]], in which the compound is more soluble.<ref>
{{cite journal
 |last=Box |first=K.J.
 |coauthors=Völgyi, G. Ruiz, R. Comer, J.E. Takács-Novák, K., Bosch, E. Ràfols, C. Rosés, M.
 |year=2007 |title=Physicochemical Properties of a New Multicomponent Cosolvent System for the pKa Determination of Poorly Soluble Pharmaceutical Compounds
 |journal=Helv. Chim. Acta
 |volume=90
 |issue=8
 |pages=1538–1553
 |doi=10.1002/hlca.200790161
}}</ref> In the example shown at the right, the p''K''<sub>a</sub> value rises steeply with increasing percentage of dioxane as the dielectric constant of the mixture is decreasing.

A p''K''<sub>a</sub> value obtained in a mixed solvent cannot be used directly for aqueous solutions. The reason for this is that when the solvent is in its standard state its activity is ''defined'' as one. For example, the standard state of water:dioxane 9:1 is precisely that solvent mixture, with no added solutes. To obtain the p''K''<sub>a</sub> value for use with aqueous solutions it has to be extrapolated to zero co-solvent concentration from values obtained from various co-solvent mixtures.

These facts are obscured by the omission of the solvent from the expression that is normally used to define p''K''<sub>a</sub>, but p''K''<sub>a</sub> values obtained in a ''given'' mixed solvent can be compared to each other, giving relative acid strengths. The same is true of p''K''<sub>a</sub> values obtained in a particular non-aqueous solvent such a DMSO.

As of 2008, a universal, solvent-independent, scale for acid dissociation constants has not been developed, since there is no known way to compare the standard states of two different solvents.

==Factors that affect p''K''a values==
Pauling's second rule states that the value of the first p''K''<sub>a</sub> for acids of the formula XO<sub>m</sub>(OH) <sub>n</sub> is approximately independent of n and X and is approximately 8 for m = 0, 2 for m = 1, −3 for m = 2 and < −10 for m = 3.<ref name="pauling"/> This correlates with the oxidation state of the central atom, X: the higher the oxidation state the stronger the oxyacid. For example, p''K''<sub>a</sub> for HClO is 7.2, for HClO<sub>2</sub> is 2.0, for HClO<sub>3</sub> is −1 and HClO<sub>4</sub> is a strong acid.

[[File:Fumaric-acid-2D-skeletal.png|thumb|100px|alt=Fumaric acid consists of two double-bonded carbon atoms capped on both sides by carboxylic acid groups C O O H; thus, its chemical formula is C O O H C H C H C O O H. The molecule has two ionizable hydrogen atoms and thus two p K As. The central double bond is in the trans configuration, which holds the two carboxylate groups apart. This contrasts with the cis isomer, maleic acid.|Fumaric acid]]
[[File:Maleic-acid-2D-skeletal-A.png|thumb|100px|alt=Maleic acid consists of two double-bonded carbon atoms capped on both sides by carboxylic acid groups C O O H; thus, its chemical formula is C O O H C H C H C O O H. It has two ionizable hydrogen atoms and thus two p K As. The central double bond is in the cis configuration. This holds the two carboxylate groups close enough so that when one group is protonated and the other deprotonated, a strong hydrogen bond can be formed between the two groups. This makes the mono-protonated species much more stable than the corresponding species of the trans isomer, fumaric acid.|Maleic acid]]
[[File:Proton sponge.svg|thumb|100px|alt=Proton sponge is a derivative of naphthalene with dimethylamino groups in the one and ten positions. This brings the two dimethyl amino groups into close proximity to each other.| proton sponge]]
With organic acids [[inductive effects]] and [[mesomeric effect]]s affect the p''K''<sub>a</sub> values. A simple example is provided by the effect of replacing the hydrogen atoms in acetic acid by the more electronegative chlorine atom. The electron-withdrawing effect of the substituent makes ionisation easier, so successive p''K''<sub>a</sub> values decrease in the series 4.7, 2.8, 1.3 and 0.7 when 0,1, 2 or 3 chlorine atoms are present.<ref>
{{cite book
 |last=Pauling |first=L.
 |title=The nature of the chemical bond and the structure of molecules and crystals; an introduction to modern structural chemistry
 |publisher=Cornell University Press
 |location=Ithaca (NY)
 |year=1960
 |edition=3rd
 |page=277
}}</ref> The [[Hammett equation]], provides a general expression for the effect of substituents.<ref>
{{cite book
 |title=Organic Chemistry
 |last=Pine |first=S.H.
 |coauthors=Hendrickson, J.B.; Cram, D.J.; Hammond, G.S.
 |year=1980
 |publisher=McGraw–Hill
 |isbn=0070501157
}} Section 13-3: Quantitative Correlations of Substituent Effects (Part B) – The Hammett Equation</ref>
:log ''K''<sub>a</sub> = log ''K''<sub>a</sub><sup>0</sup> + ρσ.
''K''<sub>a</sub> is the dissociation constant of a substituted compound, ''K''<sub>a</sub><sup>0</sup> is the dissociation constant when the substituent is hydrogen, ρ is a property of the unsubstituted compound and σ has a particular value for each substituent. A plot of log ''K''<sub>a</sub> against σ is a straight line with [[y-intercept|intercept]] log ''K''<sub>a</sub><sup>0</sup> and [[slope]] ρ. This is an example of a [[linear free energy relationship]] as log ''K''<sub>a</sub> is proportional to the standard fee energy change. Hammett originally<ref>
{{cite journal
 |last=Hammett |first=L.P.
 |title=The Effect of Structure upon the Reactions of Organic Compounds. Benzene Derivatives
 |journal=J. Amer. Chem. Soc.
 |volume=59
 |issue=1
 |pages=96–103
 |doi=10.1021/ja01280a022
 |year=1937
}}</ref> formulated the relationship with data from [[benzoic acid]] with different substiuents in the [[Arene substitution patterns|''ortho-'']] and [[Arene substitution patterns|''para-'']] positions: some numerical values are in [[Hammett equation]]. This and other studies allowed substituents to be ordered according to their [[inductive effect|electron-withdrawing]] or [[inductive effect|electron-releasing]] power, and to distinguish between inductive and mesomeric effects.<ref>
{{cite journal
 |last=Hansch |first=C.
 |coauthors=Leo, A.; Taft, R. W.
 |year=1991
 |title=A Survey of Hammett Substituent Constants and Resonance and Field Parameters
 |journal=Chem. Rev.
 |volume=91
 |issue=2
 |pages=165–195
 |doi=10.1021/cr00002a004
}}</ref><ref>{{cite journal|last=Shorter|first=J|year=1997|title=Compilation and critical evaluation of structure-reactivity parameters and equations: Part 2. Extension of the Hammett σ scale through data for the ionization of substituted benzoic acids in aqueous solvents at 25 C (Technical Report)|volume=69|issue=12|pages=2497–2510|doi=10.1351/pac199769122497|journal=Pure and Applied Chemistry}}</ref>

[[Alcohol]]s do not normally behave as acids in water, but the presence of an double bond adjacent to the OH group can substantially decrease the p''K''<sub>a</sub> by the mechanism of [[keto-enol tautomerism]]. [[Ascorbic acid]] is an example of this effect. The diketone 2,4-pentanedione ([[acetylacetone]]) is also a weak acid because of the keto-enol equilibrium. In aromatic compounds, such as [[phenol]], which have an OH substituent, [[Conjugated system|conjugation]] with the aromatic ring as a whole greatly increases the stability of the deprotonated form.

Structural effects can also be important. The difference between [[fumaric acid]] and [[maleic acid]] is a classic example. Fumaric acid is (E)-1,4-but-2-enedioic acid, a ''trans'' [[isomer]], whereas maleic acid is the corresponding ''cis'' isomer, i.e. (Z)-1,4-but-2-enedioic acid (see [[cis-trans isomerism]]). Fumaric acid has p''K''<sub>a</sub> values of approximately 3.5 and 4.5. By contrast, maleic acid has p''K''<sub>a</sub> values of approximately 1.5 and 6.5. The reason for this large difference is that when one proton is removed from the cis- isomer (maleic acid) a strong [[intramolecular]] [[hydrogen bond]] is formed with the nearby remaining carboxyl group. This favors the formation of the maleate H<sup>+</sup>, and it opposes the removal of the second proton from that species. In the ''trans'' isomer, the two carboxyl groups are always far apart, so hydrogen bonding is not observed.<ref>{{cite book
 |title=Organic chemistry
 |last=Pine |first=S.H.
 |coauthors=Hendrickson, J.B.; Cram, D.J.; Hammond, G.S.
 |year=1980
 |publisher=McGraw–Hill
 |isbn=0070501157
}} Section 6-2: Structural Effects on Acidity and Basicity</ref>

[[Proton sponge]], 1,8-bis(dimethylamino)naphthalene, has a p''K''<sub>a</sub> value of 12.1. It is one of the strongest amine bases known. The high basicity is attributed to the relief of strain upon protonation and strong internal hydrogen bonding.<ref>
{{cite journal
 |last=Alder |first=R.W.
 |coauthors=Bowman, P.S.; Steele, W.R.S.; Winterman, D.R.
 |journal=Chem. Commun.
 |year=1968
 |page=723
 |doi=10.1039/C19680000723
 |title=The Remarkable Basicity of 1,8-bis(dimethylamino)naphthalene
 |pages=723–724
}}</ref><ref>
{{cite journal
 |last=Alder |first=R.W.
 |journal=Chem. Rev.
 |year=1989
 |volume=89
 |pages=1215–1223
 |doi=10.1021/cr00095a015
 |title=Strain Effects on Amine Basicities
}}</ref>

Effects of the solvent and solvation should be mentioned also in this section. It turns out, these influences are more subtle than that of a dielectric medium mentioned above. For example, the expected (by electronic effects of methyl substituents) and observed in gas phase order of basicity of methylamines, Me<sub>3</sub>N > Me<sub>2</sub>NH > MeNH<sub>2</sub> > NH<sub>3</sub>, is changed by water to  Me<sub>2</sub>NH > MeNH<sub>2</sub> > Me<sub>3</sub>N > NH<sub>3</sub>. Neutral methylamine molecules are hydrogen-bonded to water molecules mailnly through one acceptor, N-HOH, interaction and only occasionally just one more donor bond, NH-OH<sub>2</sub>. Hence, methylamines are stabilized to about the same extent by hydration, regardless of the number of methyl groups. In stark contrast, corresponding methylammonium cations always utilize '''all''' the available protons for donor NH-OH<sub>2</sub> bonding. Relative stabilization of methylammonium ions thus decreases with the number of methyl groups explaining the order of water basicity of methylamines.<ref name="CMC2_2007">
{{cite book
 | author = Fraczkiewicz  R
 | authorlink =
 | editor = Testa B and van de Waterbeemd H
 | others =
 | title = Comprehensive medicinal chemistry II, Vol. 5
 | edition =
 | language =
 | publisher = Elsevier
 | location = Amsterdam
 | year = 2007
 | origyear =
 | pages = 603–626
 | chapter = In Silico Prediction of Ionization
 | quote =
 | isbn = 0-08-044518-7
 | oclc =
 | doi =
 | url =
 | accessdate =
}}</ref>

===Thermodynamics===
An equilibrium constant is related to the standard [[Gibbs free energy|Gibbs energy]] change for the reaction, so for an acid dissociation constant
:Δ''G''<sup>[[File:StrikeO.png]]</sup> = ''-RT'' ln ''K''<sub>a</sub>.
''R'' is the [[gas constant]] and ''T'' is the [[kelvin|absolute temperature]]. Note that p''K''<sub>a</sub>= −log ''K''<sub>a</sub> and 2.303 ≈ [[natural logarithm|ln]] 10. At 25&nbsp;°C Δ''G''<sup>[[File:StrikeO.png]]</sup> in kJ·mol<sup>−1</sup> = 5.708 p''K''<sub>a</sub> (1 kJ·mol<sup>−1</sup> = 1000 [[Joule]]s per [[Mole (unit)|mole]]). Free energy is made up of an [[enthalpy]] term and an [[entropy]] term.<ref name=Goldmine/>
:Δ''G''<sup>[[File:StrikeO.png]]</sup> = Δ''H''<sup>[[File:StrikeO.png]]</sup> − ''T''Δ''S''<sup>[[File:StrikeO.png]]</sup>
The standard enthalpy change can be determined by [[calorimetry]] or by using the [[van 't Hoff equation]], though the calorimetric method is preferable. When both the standard enthalpy change and acid dissociation constant have been determined, the standard entropy change is easily calculated from the equation above. In the following table, the entropy terms are calculated from the experimental values of p''K''<sub>a</sub> and Δ''H''<sup>[[File:StrikeO.png]]</sup>. The data were critically selected and refer to 25&nbsp;°C and zero ionic strength, in water.<ref name="Goldmine">
{{cite journal
 |title=Thermodynamic Quantities for the Ionization Reactions of Buffers
 |last=Goldberg |first=R.
 |coauthors=Kishore, N.; Lennen, R.
 |journal=J. Phys. Chem. Ref. Data
 |volume=31
 |pages=231–370
 |year=2002
 |url=http://www.nist.gov/srd/PDFfiles/jpcrd615.pdf
 |format=PDF, reprinted at [[NIST]]
 |doi=10.1063/1.1416902
}}</ref>

{| class="wikitable"
|+ Acids
! Compound !! Equilibrium !! p''K''<sub>a</sub> !! Δ''H''<sup>[[File:StrikeO.png]]</sup> /kJ·mol<sup>−1</sup>!! −''T''Δ''S''<sup>[[File:StrikeO.png]]</sup> /kJ·mol<sup>−1</sup>
|-
| HA = [[Acetic acid]] || HA {{eqm}} H<sup>+</sup> + A<sup>−</sup> || 4.756 || −0.41 || 27.56
|-
| H<sub>2</sub>A<sup>+</sup> = [[Glycine|GlycineH<sup>+</sup>]] || H<sub>2</sub>A<sup>+</sup> {{eqm}} HA + H<sup>+</sup> || 2.351 || 4.00 || 9.419
|-
| || HA {{eqm}} H<sup>+</sup> + A<sup>−</sup> || 9.78 || 44.20 || 11.6
|-
| H<sub>2</sub>A = [[Maleic acid]] || H<sub>2</sub>A {{eqm}} HA<sup>−</sup> + H<sup>+</sup> || 1.92 || 1.10 || 9.85
|-
| || HA<sup>−</sup> {{eqm}} H<sup>+</sup> + A<sup>2−</sup> || 6.27 || −3.60 || 39.4
|-
| H<sub>3</sub>A = [[Citric acid]] || H<sub>3</sub>A {{eqm}} H<sub>2</sub>A<sup>−</sup> + H<sup>+</sup>||3.128 || 4.07 || 13.78
|-
| ||H<sub>2</sub>A<sup>−</sup> {{eqm}} HA<sup>2−</sup> + H<sup>+</sup> || 4.76 || 2.23 || 24.9
|-
| ||HA<sup>2−</sup> {{eqm}} A<sup>3−</sup> + H<sup>+</sup> || 6.40 || −3.38 || 39.9
|-
| [[Boric acid]] || B(OH)<sub>3</sub> + H<sub>2</sub>O {{eqm}} [B(OH)<sub>4</sub>]<sup>-</sup> + H<sup>+</sup>|| 9.237 || 13.80 || 38.92
|-
| H<sub>3</sub>A = [[Phosphoric acid]] || H<sub>3</sub>A {{eqm}} H<sub>2</sub>A<sup>−</sup> + H<sup>+</sup> || 2.148 || −8.00 || 20.26
|-
| || H<sub>2</sub>A<sup>−</sup> {{eqm}} HA<sup>2−</sup> + H<sup>+</sup> || 7.20 || 3.60 || 37.5
|-
| || HA<sup>2−</sup> {{eqm}} A<sup>3−</sup> + H<sup>+</sup> || 12.35 || 16.00 || 54.49
|-
| HA<sup>−</sup> = [[Bisulfate|Hydrogen sulfate]] || HA<sup>−</sup> {{eqm}} A<sup>2−</sup> + H<sup>+</sup> || 1.99 || −22.40 || 33.74
|-
| H<sub>2</sub>A = [[Oxalic acid]] || H<sub>2</sub>A {{eqm}} HA<sup>−</sup> + H<sup>+</sup> || 1.27 || −3.90 || 11.15
|-
| ||HA<sup>−</sup> {{eqm}} A<sup>2−</sup> + H<sup>+</sup> || 4.266 || 7.00 || 31.35
|}

{| class="wikitable"
|+ Conjugate acid of bases
! Compound !! Equilibrium !! p''K''<sub>a</sub> !! Δ''H''<sup>[[File:StrikeO.png]]</sup> /kJ·mol<sup>−1</sup>!! −''T''Δ''S''<sup>[[File:StrikeO.png]]</sup> /kJ·mol<sup>−1</sup>
|-
| B = [[Ammonia]] || HB<sup>+</sup> {{eqm}} B + H<sup>+</sup> || 9.245 || 51.95 || 0.8205
|-
| B = [[Methylamine]] || HB<sup>+</sup> {{eqm}} B + H<sup>+</sup> || 10.645 || 55.34 || 5.422
|-
| B = [[Triethylamine]] || HB<sup>+</sup> {{eqm}} B + H<sup>+</sup> || 10.72 || 43.13 || 18.06
|}
The first point to note is that, when p''K''<sub>a</sub> is positive, the standard free energy change for the dissociation reaction is also positive; that is, dissociation of a weak acid is not a [[spontaneous process]]. Second, some reactions are [[exothermic]] and some are [[endothermic]], but, when Δ''H''<sup>[[File:StrikeO.png]]</sup> is negative −''T''Δ''S''<sup>[[File:StrikeO.png]]</sup> is the dominant factor, which determines that Δ''G''<sup>[[File:StrikeO.png]]</sup> is positive. Last, the entropy contribution is always unfavourable in these reactions.

Note that the ''standard'' free energy change for the reaction is for the changes ''from'' the reactants in their standard states ''to'' the products in their standard states. The free energy change ''at'' equilibrium is zero since the [[chemical potential]]s of reactants and products are equal at equilibrium.

==Experimental determination==
[[File:Oxalic acid titration grid.png|thumb|alt= The image shows the [[titration curve]] of oxalic acid, showing the pH of the solution as a function of added base. There is a small inflection point at about pH 3 and then a large jump from pH 5 to pH 11, followed by another region of slowly increasing pH.|A calculated [[titration curve]] of [[oxalic acid]] titrated with a solution of [[sodium hydroxide]]]]
{{see also|Determination of equilibrium constants}}

The experimental determination of p''K''<sub>a</sub> values is commonly performed by means of [[titration]]s, in a medium of high ionic strength and at constant temperature.<ref>
{{cite book
 |title=Determination and Use of Stability Constants
 |last=Martell |first=A.E.
 |coauthors=Motekaitis, R.J.
 |year=1992
 |publisher=Wiley
 |isbn=0471188174
}} Chapter 4: Experimental Procedure for Potentiometric [[pH]] Measurement of Metal Complex Equilibria</ref> A typical procedure would be as follows. A solution of the compound in the medium is acidified with a strong acid to the point where the compound is fully protonated. The solution is then titrated with a strong base until all the protons have been removed. At each point in the titration pH is measured using a [[glass electrode]] and a [[pH meter]]. The equilibrium constants are found by fitting calculated pH values to the observed values, using the method of [[least squares]].<ref>
{{cite book
 |last=Leggett |first=D.J.
 |title=Computational Methods for the Determination of Formation Constants
 |publisher=Plenum
 |year=1985
 |isbn=0306419572
}}</ref>

The total volume of added strong base should be small compared to the initial volume of titrand solution in order to keep the ionic strength nearly constant. This will ensure that p''K''<sub>a</sub> remains invariant during the titration.

A calculated [[titration curve]] for oxalic acid is shown at the right. Oxalic acid has p''K''<sub>a</sub> values of 1.27 and 4.27. Therefore the buffer regions will be centered at about pH 1.3 and pH 4.3. The buffer regions carry the information necessary to get the p''K''<sub>a</sub> values as the concentrations of acid and conjugate base change along a buffer region.

Between the two buffer regions there is an end-point, or [[equivalence point]], where the pH rises by about two units. This end-point is not sharp and is typical of a diprotic acid whose buffer regions overlap by a small amount: p''K''<sub>a2</sub> − p''K''<sub>a1</sub> is about three in this example. (If the difference in p''K'' values were about two or less, the end-point would not be noticeable.) The second end-point begins at about pH 6.3 and is sharp. This indicates that all the protons have been removed. When this is so, the solution is not buffered and the pH rises steeply on addition of a small amount of strong base. However, the pH does not continue to rise indefinitely. A new buffer region begins at about pH 11 (p''K''<sub>w</sub> − 3), which is where [[self-ionization of water]] becomes important.

It is very difficult to measure pH values of less than two in aqueous solution with a [[glass electrode#Range of a pH glass electrode|glass electrode]], because the [[Nernst equation]] breaks down at such low pH values. To determine p''K'' values of less than about 2 or more than about 11 [[Determination of equilibrium constants#Absorbance|spectrophotometric]]<ref>
{{cite journal
 |last=Allen |first=R.I.
 |coauthors=Box,K.J.; Comer, J.E.A.; Peake, C.; Tam, K.Y.
 |year=1998
 |title=Multiwavelength Spectrophotometric Determination of Acid Dissociation Constants of Ionizable Drugs
 |journal=J. Pharm. Biomed. Anal.
 |volume=17
 |issue=4–5
 |pages=699–641
 |doi=10.1016/S0731-7085(98)00010-7
}}</ref> or [[Determination of equilibrium constants#NMR chemical shift measurements|NMR]]<ref name=IUPAC-NMR /><ref>
{{cite journal
 |last=Szakács |first=Z.
 |coauthors=Hägele, G.
 |year=2004
 |title=Accurate Determination of Low pK Values by 1H NMR Titration
 |journal=Talanta
 |volume=62
 |pages=819–825
 |doi=10.1016/j.talanta.2003.10.007
 |pmid=18969368
 |issue=4
}}</ref> measurements may be used instead of, or combined with, pH measurements.<ref>
{{cite journal
 |last=Box |first=K.J.
 |coauthors=Donkor, R.E. Jupp, P.A. Leader, I.P. Trew, D.F. Turner, C.H.
 |year=2008
 |title=The Chemistry of Multi-Protic Drugs Part 1: A Potentiometric, Multi-Vavelength UV and NMR pH Titrimetric Study of the Micro-Speciation of SKI-606
 |journal=J. Pharm. Biomed. Anal.
 |volume=47
 |issue=2
 |pages=303–311
 |doi=10.1016/j.jpba.2008.01.015
 |pmid=18314291
}}</ref>

When the glass electrode cannot be employed, as with non-aqueous solutions, spectrophotometric methods are frequently used.<ref name=Ivo_AN/> These may involve [[absorbance]] or [[fluorescence]] measurements. In both cases the measured quantity is assumed to be proportional to the sum of contributions from each photo-active species; with absorbance measurements the [[Beer-Lambert law]] is assumed to apply.

Aqueous solutions with normal water cannot be used for <sup>1</sup>H NMR measurements but [[heavy water]], D<sub>2</sub>O, must be used instead. <sup>13</sup>C NMR data, however, can be used with normal water and <sup>1</sup>H NMR spectra can be used with non-aqueous media. The quantities measured with NMR are time-averaged [[chemical shift]]s, as proton exchange is fast on the NMR time-scale. Other chemical shifts, such as those of <sup>31</sup>P can be measured.

===Micro-constants===
[[File:Spermine.svg|thumb|alt=Spermine is a long, symmetrical molecule capped at both ends with amino groups N H 2. It has two N H groups symmetrically placed within the molecule, separated from each other by four methylene groups C H 2, and from the amino ends by three methylene groups. Thus, the full molecular formula is N H 2 C H 2 C H 2 C H 2 N H C H 2 C H 2 C H 2 C H 2 N H C H 2 C H 2 C H 2 N H 2.|spermine]]
A base such as [[spermine]] has a few different sites where protonation can occur. In this example the first proton can go on the terminal -NH<sub>2</sub> group, or either of the internal -NH- groups. The p''K''<sub>a</sub> values for dissociation of spermine protonated at one or other of the sites are examples of [[equilibrium constant#Micro-constants|micro-constants]]. They cannot be determined directly by means of pH, absorbance, fluorescence or NMR measurements. Nevertheless, the site of protonation is very important for biological function, so mathematical methods have been developed for the determination of micro-constants.<ref>
{{cite journal
 |last=Frassineti |first=C.
 |coauthors=Alderighi, L; Gans, P; Sabatini, A; Vacca, A; Ghelli, S.
 |year=2003
 |title=Determination of Protonation Constants of Some Fluorinated Polyamines by Means of <sup>13</sup>C NMR Data Processed by the New Computer Program HypNMR2000. Protonation Sequence in Polyamines.
 |journal=Anal. Bioanal. Chem.
 |volume=376
 |pages=1041–1052
 |doi=10.1007/s00216-003-2020-0
 |pmid=12845401
 |issue=7
}}</ref>

==Applications and significance==
A knowledge of p''K''<sub>a</sub> values is important for the quantitative treatment of systems involving acid–base equilibria in solution. Many applications exist in [[biochemistry]]; for example, the p''K''<sub>a</sub> values of proteins and [[amino acid]] side chains are of major importance for the activity of enzymes and the stability of proteins.<ref>
{{cite journal
 |last=Onufriev |first=A.
 |coauthors= Case, D.A; Ullmann G.M.
 |year=2001
 |title=A Novel View of pH Titration in Biomolecules
 |journal=Biochemistry
 |volume=40
 |pages=3413–3419
 |doi=10.1021/bi002740q
 |pmid=11297406
 |issue=12
}}</ref> [[Protein pKa calculations|Protein p''K''a values]] cannot always be measured directly, but may be calculated using theoretical methods. [[Buffer solutions]] are used extensively to provide solutions at or near the physiological pH for the study of biochemical reactions;<ref>
{{cite journal
 |last=Good |first=N.E.
 |coauthors=Winget, G.D.; Winter, W.; Connolly, T.N.; Izawa, S.; Singh, R.M.M.
 |title=Hydrogen Ion Buffers for Biological Research
 |year=1966
 |journal=Biochemistry
 |volume=5
 |issue=2
 |pages=467–477
 |doi=10.1021/bi00866a011
 |pmid=5942950
}}</ref> the design of these solutions depends on a knowledge of the p''K''<sub>a</sub> values of their components. Important buffer solutions include [[MOPS]], which provides a solution with pH 7.2, and [[tricine]], which is used in [[gel electrophoresis]].<ref>
{{cite book
 |title=Gel Electrophoresis: Proteins
 |last=Dunn |first=M.J.
 |year=1993
 |publisher=Bios Scientific Publishers
 |isbn=187274821X
}}</ref><ref>
{{cite book
 |title=Gel Electrophoresis: Nucleic Acids
 |last=Martin |first=R.
 |year=1996
 |publisher=Bios Scientific Publishers
 |isbn=1872748287
}}</ref> Buffering is an essential part of [[acid base physiology]] including [[acid-base homeostasis]],<ref>
{{cite book
 |title=Acid–Base and Potassium Homeostasis
 |last=Brenner |first=B.M. (Editor)
 |coauthors=Stein, J.H. (Editor)
 |year=1979
 |publisher=Churchill Livingstone
 |isbn=0443080178
}}</ref> and is key to understanding disorders such as [[acid-base imbalance]].<ref>
{{cite book
 |title=Fundamentals of Acids, Bases, Buffers & Their Application to Biochemical Systems
 |last=Scorpio |first=R.
 |year=2000
 |publisher=Kendall/Hunt Pub. Co.
 |isbn=0787273740
}}</ref><ref>
{{cite book
 |title=Buffer Solutions: The Basics
 |last=Beynon |first=R.J.
 |coauthors=Easterby, J.S.
 |year=1996
 |publisher=Oxford University Press
 |location=Oxford
 |isbn=0199634424
}}</ref><ref>
{{cite book
 |title=Buffers for pH and Metal Ion Control
 |last=Perrin |first=D.D.
 |coauthors=Dempsey, B.
 |year=1974
 |publisher=Chapman & Hall
 |location=London
 |isbn=0412117002
}}</ref> The [[isoelectric point]] of a given molecule is a function of its p''K'' values, so different molecules have different isoelectric points. This permits a technique called [[isoelectric focusing]]<ref>
{{cite book
 |last=Garfin |first=D.(Editor)
 |coauthors=Ahuja, S. (Editor)
 |title=Handbook of Isoelectric Focusing and Proteomics
 |publisher=Elsevier
 |year=2005
 |volume=7
 |isbn=0120887525U
}}</ref>, which is used for separation of proteins by [[Two-dimensional gel electrophoresis|2-D gel polyacrylamide gel electrophoresis]].

Buffer solutions also play a key role in [[analytical chemistry]]. They are used whenever there is a need to fix the pH of a solution at a particular value. Compared with an aqueous solution, the pH of a buffer solution is relatively insensitive to the addition of a small amount of strong acid or strong base. The buffer capacity<ref>
{{cite book
 |last=Hulanicki |first=A.
 |title=Reactions of Acids and Bases in Analytical Chemistry
 |publisher=Horwood
 |year=1987
 |isbn=0853123306
 |others=Masson, M.R. (translation editor)
}}</ref> of a simple buffer solution is largest when pH = p''K''<sub>a</sub>. In [[acid-base extraction]], the efficiency of extraction of a compound into an organic phase, such as an [[ether]], can be optimised by adjusting the pH of the aqueous phase using an appropriate buffer. At the optimum pH, the concentration of the electrically neutral species is maximised; such a species is more soluble in organic solvents having a low [[dielectric constant]] than it is in water. This technique is used for the purification of weak acids and bases.<ref>
{{cite journal
 |last=Eyal |first=A.M
 |year=1997
 |title=Acid Extraction by Acid–Base-Coupled Extractants
 |journal=Ion Exchange and Solvent Extraction: A Series of Advances
 |volume=13
 |pages=31–94
}}</ref>

A [[pH indicator]] is a weak acid or weak base that changes colour in the transition pH range, which is approximately p''K''<sub>a</sub> ± 1. The design of a [[universal indicator]] requires a mixture of indicators whose adjacent p''K''<sub>a</sub> values differ by about two, so that their transition pH ranges just overlap.

In [[pharmacology]] ionization of a compound alters its physical behaviour and macro properties such as solubility and [[partition coefficient|lipophilicity]] (log p). For example ionization of any compound will increase the solubility in water, but decrease the lipophilicity. This is exploited in [[drug development]] to increase the concentration of a compound in the blood by adjusting the p''K''<sub>a</sub> of an ionizable group.<ref name=avdeef>
{{cite book
 |title=Absorption and Drug Development: Solubility, Permeability, and Charge State
 |last=Avdeef |first=A.
 |year=2003
 |publisher=Wiley
 |location=New York
 |isbn=0471423653}}</ref>

Knowledge of p''K''<sub>a</sub> values is important for the understanding of [[Complex (chemistry)|coordination complexes]], which are formed by the interaction of a metal ion, M<sup>m+</sup>, acting as a [[Lewis acid]], with a [[ligand]], L, acting as a [[Lewis base]]. However, the ligand may also undergo protonation reactions, so the formation of a complex in aqueous solution could be represented symbolically by the reaction
::[M(H<sub>2</sub>O)<sub>''n''</sub>]<sup>''m''+</sup> +LH {{eqm}} [M(H<sub>2</sub>O)<sub>''n''−1</sub>L]<sup>(''m''−1)+</sup> + H<sub>3</sub>O<sup>+</sup>
To determine the equilibrium constant for this reaction, in which the ligand loses a proton, the p''K''<sub>a</sub> of the protonated ligand must be known. In practice, the ligand may be polyprotic; for example [[EDTA|EDTA<sup>4−</sup>]] can accept four protons; in that case, all p''K''<sub>a</sub> values must be known. In addition, the metal ion is subject to [[hydrolysis#Hydrolysis of metal aqua ions|hydrolysis]], that is, it behaves as a weak acid, so the p''K'' values for the hydrolysis reactions must also be known.<ref>
{{cite book
 |title=Chemistry of Complex Equilibria
 |last=Beck |first=M.T.
 |coauthors=Nagypál, I.
 |year=1990
 |publisher=Horwood
 |isbn=0853121435
}}</ref>
Assessing the [[risk assessment|hazard]] associated with an acid or base may require a knowledge of p''K''<sub>a</sub> values.<ref>
{{cite book
 |title=Risk Assessment of Chemicals: An Introduction
 |last=van Leeuwen |first=C.J.
 |coauthors=Hermens, L. M.
 |year=1995
 |publisher=Springer
 |isbn=0792337409
 |pages=254–255
}}</ref> For example, [[hydrogen cyanide]] is a very toxic gas, because the [[cyanide#Toxicity|cyanide ion]] inhibits the iron-containing enzyme [[cytochrome c oxidase]]. Hydrogen cyanide is a weak acid in aqueous solution with a p''K''<sub>a</sub> of about 9. In strongly alkaline solutions, above pH 11, say, it follows that sodium cyanide is "fully dissociated" so the hazard due to the hydrogen cyanide gas is much reduced. An acidic solution, on the other hand, is very hazardous because all the cyanide is in its acid form. Ingestion of cyanide by mouth is potentially fatal, independently of pH, because of the reaction with cytochrome c oxidase.

In [[environmental science]] acid–base equilibria are important for lakes<ref>
{{cite book
 |last=Skoog |first=D.A
 |coauthors=West, D.M.; Holler, J.F.; Crouch, S.R.
 |title=Fundamentals of Analytical Chemistry
 |publisher=Thomson Brooks/Cole
 |year=2004
 |edition=8th
 |isbn=0-03-035523-0
}} Chapter 9-6: Acid Rain and the Buffer Capacity of Lakes
</ref> and rivers;<ref name=stumm_morgan>
{{cite book
 |title=Water Chemistry
 |last=Stumm |first=W.
 |coauthors=Morgan, J.J.
 |year=1996
 |publisher=Wiley
 |location=New York
 |isbn=0471051969
}}</ref><ref name=aquatic>
{{cite book
 |title=Aquatic Chemistry: Chemical Equilibria and Rates in Natural Waters
 |last=Snoeyink |first=V.L.
 |coauthors=Jenkins, D.
 |year=1980
 |publisher=Wiley
 |location=New York
 |isbn=0471511854
}}</ref> for example, [[humic acid]]s are important components of natural waters. Another example occurs in [[chemical oceanography]]:<ref>
{{cite book
 |title=Chemical Oceanography
 |last=Millero |first=F.J.
 |edition=3rd
 |year=2006 |publisher=Taylor and Francis
 |location=London
 |isbn=0849322804
}}</ref>
in order to quantify the solubility of iron(III) in seawater at various [[salinity|salinities]], the p''K''<sub>a</sub> values for the formation of the iron(III) hydrolysis products Fe(OH)<sup>2+</sup>, Fe(OH)<sub>2</sub><sup>+</sup> and Fe(OH)<sub>3</sub> were determined, along with the [[solubility product]] of [[iron hydroxide]].<ref>
{{cite journal
 |last=Millero |first=F.J.
 |coauthors=Liu, X.
 |year=2002
 |title=The Solubility of Iron in Seawater
 |journal=Marine chemistry
 |volume=77
 |pages=43–54
 |doi=10.1016/S0304-4203(01)00074-3
}}</ref>

==Values for common substances==
There are multiple techniques to determine the p''K''<sub>a</sub> of a chemical, leading to some discrepancies between different sources. Well measured values are typically within 0.1 units of each other. Data presented here were taken at 25&nbsp;°C in water.<ref name=SA /><ref name=Lange>
{{cite book
 |title=Lange's Handbook of Chemistry
 |last=Speight |first=J.G.
 |year=2005
 |publisher=McGraw–Hill
 |edition=18th
 |isbn=0071432205
}} Chapter 8</ref>
More values can be found in [[#Thermodynamics|thermodynamics]], above.

{| class="wikitable"
|-
! Chemical Name
! Equilibrium
! p''K''<sub>a</sub>
|-
| B = [[Adenine]]
| BH<sub>2</sub><sup>2+</sup> {{Eqm}} BH<sup>+</sup> + H<sup>+</sup>
| 4.17
|-
|
| BH<sup>+</sup> {{eqm}} B + H<sup>+</sup>
|9.65
|-
| H<sub>3</sub>A = [[Arsenic acid]]
| H<sub>3</sub>A {{eqm}} H<sub>2</sub>A<sup>−</sup> + H<sup>+</sup>
| 2.22
|-
|
| H<sub>2</sub>A<sup>−</sup> {{eqm}} HA<sup>2−</sup> + H<sup>+</sup>
| 6.98
|-
|
| HA<sup>2−</sup> {{eqm}} A<sup>3−</sup> + H<sup>+</sup>
| 11.53
|-
| HA = [[Benzoic acid]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
|4.204
|-
| HA = [[Butanoic acid]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 4.82
|-
| H<sub>2</sub>A = [[Chromic acid]]
| H<sub>2</sub>A {{eqm}} HA<sup>−</sup> + H<sup>+</sup>
| 0.98
|-
|
| HA<sup>−</sup> {{eqm}} A<sup>2−</sup> + H<sup>+</sup>
| 6.5
|-
| B = [[Codeine]]
| BH<sup>+</sup> {{eqm}} B + H<sup>+</sup> </sup>
| 8.17
|-
| HA = [[Cresol]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 10.29
|-
| HA = [[Formic acid]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 3.751
|-
| HA = [[Hydrofluoric acid]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 3.17
|-
| HA = [[Hydrocyanic acid]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 9.21
|-
| HA = [[Hydrogen selenide]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 3.89
|-
| HA = [[Hydrogen peroxide]] (90%)
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 11.7
|-
| HA = [[Lactic acid]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 3.86
|-
| HA = [[Propionic acid]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 4.87
|-
| HA = [[Phenol]]
| HA {{eqm}} H<sup>+</sup> + A<sup>−</sup>
| 9.99
|-
| H<sub>2</sub>A = [[Vitamin C|L-(+)-Ascorbic Acid]]
| H<sub>2</sub>A {{eqm}} HA<sup>−</sup> + H<sup>+</sup>
|4.17
|-
|
| HA<sup>−</sup> {{eqm}} A<sup>2−</sup> + H<sup>+</sup>
|11.57
|-
|}

==See also==
* [[Grotthuss mechanism]]: how protons are transferred between hydronium ions and water molecules, accounting for the exceptionally high ionic mobility of the proton (animation).
* [[Ocean acidification]]: dissolution of atmospheric carbon dioxide affects [[pH#Seawater|seawater pH]]. The reaction depends on [[total inorganic carbon]] and on solubility equilibria with solid carbonates such as [[limestone]] and [[dolomite]].
* [[Predominance diagram]]: relates to equilibria involving [[oxyanion|polyoxyanions]]. p''K''<sub>a</sub> values are needed to construct these diagrams.
* [[Proton affinity]]: a measure of basicity in the gas phase.
* [[Stability constants of complexes]]: formation of a complex can often be seen as a competition between proton and metal ion for a ligand, which is the product of dissociation of an acid.
* [[Hammett acidity function]]: a measure of acidity that is used for very concentrated solutions of strong acids, including [[superacids]].

==References==
{{Reflist|2}}

==Further reading==
* {{cite book
 |last=Albert |first=A.
 |coauthors=Serjeant, E.P.
 |title=The Determination of Ionization Constants: A Laboratory Manual
 |publisher=Chapman & Hall
 |year=1971
 |isbn=0412103001
}} (Previous edition published as {{cite book |title=Ionization constants of acids and bases |location=London (UK) |publisher=Methuen |year=1962}})
* {{cite book
 |title=Chemical Principles: The Quest for Insight
 |last=Atkins |first=P.W.
 |coauthors=Jones, L.
 |year=2008
 |edition=4th
 |publisher=W.H. Freeman
 |isbn=1-4292-0965-8
}}
* {{Housecroft3rd}} (Non-aqueous solvents)
* {{cite book
 |last=Hulanicki |first=A.
 |title=Reactions of Acids and Bases in Analytical Chemistry
 |publisher=Horwood
 |year=1987
 |isbn=0853123306
}} (translation editor: Mary R. Masson)
* {{cite book
 |last=Perrin |first=D.D.
 |coauthors=Dempsey, B.; Serjeant, E.P.
 |title=pKa Prediction for Organic Acids and Bases
 |publisher=Chapman & Hall
 |year=1981
 |isbn=041222190x
}}
* {{cite book
 |last=Reichardt
 |first=C.
 |title=Solvents and Solvent Effects in Organic Chemistry
 |publisher=Wiley-VCH
 |year=2003
 |edition=3rd
 |isbn=3-527-30618-8}} Chapter 4: Solvent Effects on the Position of Homogeneous Chemical Equilibria.
* {{cite book
 |last=Skoog |first=D.A.
 |coauthors=West, D.M.; Holler, J.F.; Crouch, S.R.
 |title=Fundamentals of Analytical Chemistry
 |publisher=Thomson Brooks/Cole
 |year=2004
 |edition=8th
 |isbn=0-03-035523-0
}}

==External links==
* [http://tera.chem.ut.ee/~ivo/HA_UT/ Acidity-Basicity Data in Nonaqueous Solvents]
: Extensive bibliography of p''K''<sub>a</sub> values in [[Dimethyl sulfoxide|DMSO]], [[acetonitrile]], [[THF]], [[heptane]], [[1,2-dichloroethane]], and in the gas phase.
* [http://www2.iq.usp.br/docente/gutz/Curtipot_.html Curtipot]
: All-in-one freeware for pH and acid-base equilibrium calculations and for simulation and analysis of [[potentiometric titration]] curves with spreadsheets.
* [http://sparc.chem.uga.edu SPARC Physical/Chemical property calculator]
: Includes a database with aqueous, non-aqueous, and gaseous phase p''K''<sub>a</sub> values than can be searched using [[Simplified molecular input line entry specification|SMILES]] or [[CAS registry number]]s.
* [http://www.jesuitnola.org/upload/clark/Refs/aqueous.htm Aqueous-Equilibrium Constants]
: p''K''<sub>a</sub> values for various acid and bases. Includes a table of some solubility products.
* [http://www.raell.demon.co.uk/chem/logp/logppka.htm Free guide to p''K''<sub>a</sub> and log p interpretation and measurement]
: Explanations of the relevance of these properties to [[pharmacology]].
* [http://www.chemaxon.com/marvin/sketch/index.jsp Free online prediction tool (Marvin)] pK<sub>a</sub>, logP, logD etc. From [[Chemaxon|ChemAxon]]
<!-- {{chemical solutions}} -->

{{DEFAULTSORT:Acid Dissociation Constant}}
[[Category:Equilibrium chemistry]]
[[Category:Acids]]
[[Category:Bases]]
[[Category:Analytical chemistry]]
[[Category:Physical chemistry]]

[[ar:ثابت الانحلال الحمضي]]
[[ca:Constant d'acidesa]]
[[da:Syrestyrkekonstant]]
[[de:Säurekonstante]]
[[es:Constante de disociación ácida]]
[[fr:Constante d'équilibre]]
[[id:Konstanta disosiasi asam]]
[[it:Costante di dissociazione acida]]
[[lt:Rūgšties disociacijos konstanta]]
[[mk:Киселинска дисоцијациона константа]]
[[nl:Zuurconstante]]
[[ja:酸解離定数]]
[[no:Syrekonstanten]]
[[pl:Moc kwasu]]
[[pt:Constante de acidez]]
[[ru:Константа диссоциации кислоты]]
[[fi:Happovakio]]
[[sv:Syrakonstant]]
[[uk:PKa]]
[[zh:酸度系数]]
[[Category:2Fix]]