View source for Alinco DJ-180

==Specification==

{|
!1) General
|-
|Frequency Coverage:
|-
|RX: || 137.000 ~ 173.995MHz (T, TM version)
|-
|TX: || 144.000 ~ 147.995MHz (T, TM version)
|-
|RX: || 137.000 ~ 173.995MHz (TA, TB, TA2, TB2 version)
|-
|TX: || 137.000 ~ 173.995MHz (TA, TB, TA2, TB2 version)
|-
|RX/TX: || 144.000~145.995MHz(TS, TSA, TZ, E, EA, EB version)
|-
|Frequency Resolution: || 5, 10, 12.5, 15, 20, 25kHz steps
|-
|Memory Channels: || 10 Channels (standard)
|-
|Antenna Impedance: || 50 ohm unbalanced
|-
|Signal Type: || F3E(FM)
|-
|Power Supply Requirement:DC 5.5V~13.8V (Rated 7.2V Ni-Cd)
|-
|Dimensions: || Approximately 132(H) x 58(W) x 33(D) mm
|-
|Weight : || Approximately 350g
|-
!2) Transmitter
|-
|Output Power: || I 5.0W with Optional 12V Ni-Cd Battery
|-
| ||2.0W with Standard 7.2V Ni-Cd Battery
|-
| ||(144.000~147.995MHz)
|-
| ||(160.000~165.000MHz)... TA2, TB2 only
|-
|Modulation System: || Variable Reactance Frequency Modulation
|-
|Max. Frequency Deviation: || +/ -5kHz
|-
|Tone Frequency: || 67.0 to 250.3Hz -38 Subaudible Encoding Tones
|-
|(E, EA, EB version: || option)
|-
|DTMF Encoder: || (TZ, EB version: || option)
|-
|Tone Burst: || (E, EA, EB version only)
|-
!3) Receiver
|-
|Receiver System: || Double-Conversion Superheterodyne
|-
|Intermediate Frequency.' 1st IF: || 21.4MHz
|-
|2nd IF: || 455kHz
|-
|Sensitivity: || 12dB SINAD less than -10dBu
|-
| ||(144.000~17.995MHz)
|-
| ||(160.000~165.000MHz)... TA2, TB2 only
|}

==Manuals==
* [[Media:alinco_dj-180_1400_-_Service_Manual.pdf|dj-180/1400_-_Service_Manual (pdf)]]

[[Category:Radio Receiver (Alinco)]]