View source for Cutting fluid

[[Image:Makino-S33-MachiningCenter-example.jpg|thumb|Thin-wall milling of [[aluminum]] using a water-based cutting fluid on the [[milling cutter]].]]
{{Refimprove|date=June 2010}}

'''Cutting fluid''' is a type of [[coolant]] and [[lubrication|lubricant]] designed specifically for [[metalworking]] and [[machining]] processes. There are various kinds of cutting fluids, which include oils, oil-water [[emulsion]]s, pastes, gels, and mists. They may be made from petroleum distillates, [[animal fat]]s, [[plant oil]]s, or other raw ingredients. Depending on context and on which type of cutting fluid is being considered, it may be referred to as '''cutting fluid''', '''cutting oil''', '''cutting compound''', '''coolant''', or '''lubricant'''.

Most metalworking and machining processes can benefit from the use of cutting fluid, depending on workpiece material. A common exception to this is machining [[cast iron]] or [[brass]], which are machined dry. Also, interrupted cuts, such as milling with carbide cutters, are usually recommended to be used dry due to damage to the cutters caused by thermoshock.

The properties that are sought after in a good cutting fluid are the ability to: 
* keep the workpiece at a stable temperature (critical when working to close [[Tolerance (engineering)|tolerance]]s). Very warm is OK, but extremely hot or alternating hot-and-cold are avoided.
* maximize the life of the cutting tip by lubricating the working edge and reducing [[Built up edge|tip welding]].
* ensure safety for the people handling it (toxicity, bacteria, fungi) and for the environment upon disposal.
* prevent rust on machine parts and cutters.

== Mechanisms of action ==
=== Cooling ===
Metal cutting operations involve generation of [[heat]] due to friction between the tool and the pieces and due to energy lost deforming the material. The surrounding air alone is a rather poor coolant for the cutting tool, because the rate of heat transfer is low. Ambient-air cooling is adequate for light cuts with periods of rest in between, such as are typical in [[maintenance, repair and operations]] (MRO) work or hobbyist contexts. However, for heavy cuts and constant use, such as in production work, more heat is produced per time period than ambient-air cooling can remove. It is not acceptable to introduce long idle periods into the cycle time to allow the air-cooling of the tool to "catch up" when the heat-removal can instead be accomplished with a flood of liquid, which can "keep up" with the heat generation.

=== Lubrication at the tool-chip interface ===
Besides cooling, cutting fluids also aid the cutting process by lubricating the interface between the tool's cutting edge and the chip. By preventing friction at this interface, some of the heat generation is prevented. This lubrication also helps prevent the chip from being welded onto the tool, which interferes with subsequent cutting.

[[Extreme pressure additive]]s are often added to cutting fluids to further reduce tool wear.

== Delivery methods ==
Every conceivable method of applying cutting fluid (e.g., flooding, spraying, dripping, misting, brushing) can be used, with the best choice depending on the application and the equipment available. For many metalcutting applications the ideal would be high-pressure, high-volume pumping to force a stream of fluid directly into the tool-chip interface, with walls around the machine to contain the splatter and a sump to catch, filter, and recirculate the fluid. This type of system is commonly employed, especially in manufacturing. It is often not a practical option for MRO or hobbyist metalcutting, where smaller, simpler machine tools are used. Fortunately it is also not necessary in those applications, where heavy cuts, aggressive [[speeds and feeds]], and constant, all-day cutting are not vital.

==Types==
=== Liquids ===
There are generally three types of liquids: mineral, semi-synthetic, and synthetic. Semi-synthetic and synthetic cutting fluids try to blend the best properties of oil into the best properties of water. They basically achieve this by allowing oil to emulsify into water. Some of these properties are: rust inhibition, tolerance of a wide range of water hardness (maintain pH stability around 9 to 10), ability to work with many metals, resist thermal breakdown, and environmental safety.<ref name=osha>OSHA (1999). [http://www.osha.gov/SLTC/metalworkingfluids/metalworkingfluids_manual.html Metalworking Fluids: Safety and Health Best Practices Manual]. Salt Lake City: U.S. Department of Labor, Occupational Safety and Health Administration.</ref>

Water is a great conductor of heat but has drawbacks as a cutting fluid. It boils easily, promotes rusting of machine parts, and does not lubricate well. Therefore, other ingredients are necessary to create an optimal cutting fluid.

[[Mineral oil]]s, which are petroleum-based, began in the late 1800s. They vary from the thick, dark, sulfur-rich cutting oils used in heavy industry to light, clear oils.

Semi-synthetic coolants are an emulsion or [[microemulsion]] of water with mineral oil. They began in the 1930s. A typical CNC usually uses emulsified coolant, which consists of a small amount of oil emulsified into a larger amount of water through the use of a detergent. 

[[Synthetic chemical|Synthetic]] coolants originated in the late 1950s and are usually water-based.

A hand-held [[refractometer]] is used to determine the mix ratio (also called concentration) of water soluble coolants.  Numerous other test equipment are used to determine such things as acidity, and amount of conductivity.

Others include:

* [[Kerosene]], [[Isopropyl alcohol|rubbing alcohol]], and [[3-In-One Oil]] often give good results when working on aluminium.
* [[WD-40]]
* [[Dielectric]] fluid is the cutting fluid used in [[electrical discharge machining|Electrical discharge machines]] (EDMs). It is usually [[deionized water]] or a high-[[flash point|flash-point]] kerosene. Intense heat is generated by the cutting action of the electrode (or wire) and the fluid is used to stabilise the temperature of the workpiece, along with flushing any eroded particles from the immediate work area. The dielectric fluid is nonconductive.
* Liquid- (water- or petroleum oil-) cooled water tables are used with the plasma arc cutting (PAC) process.

=== Pastes or gels ===
Cutting fluid may also take the form of a paste or gel when used for some applications, in particular hand operations such as [[drill]]ing and [[taps and dies|tapping]].

=== Mists ===
Some cutting fluids are used in mist ([[aerosol]]) form, although breathing such a lubricant in mist form is a severe and immediate health hazard.

=== Past ===
* In 19th-century machining practice, it was not uncommon to use plain water. This was simply a practical expedient to keep the cutter cool, regardless of whether it provided any lubrication at the cutting edge–chip interface. When one considers that [[High speed steel|high-speed steel]] (HSS) had not been developed yet, the need to cool the tool becomes all the more apparent. (HSS retains its hardness at high temperatures; other carbon tool steels do not.) An improvement was soda water, which better inhibited the rusting of machine slides. These options are generally not used today because better options are available.
* Lard was very popular in the past.<ref>{{cite book |last=Hartness |first=James |authorlink=James Hartness |title=Hartness Flat Turret Lathe Manual: A Hand Book for Operators |publisher=Jones & Lamson Machine Company |year=1915 |location=Springfield, Vermont and London
 |url=http://books.google.com/books?id=WbZKAAAAMAAJ&dq=james%20hartness%20flat%20turret%20lathe%20manual&pg=PA153#v=onepage&q=&f=false |doi= |id= |isbn= |pages=153–155}}</ref> It is used infrequently today, because of the wide variety of other options, but it is still an option.
* Old machine shop training texts speak of using [[Lead tetroxide|red lead]] and [[white lead]], often mixed into lard or lard oil. This practice is obsolete due to the toxicity of lead.
* From the mid-20th century to the 1990s, [[1,1,1-Trichloroethane|1,1,1-trichloroethane]] was used as an additive to make some cutting fluids more effective. In shop-floor slang it was referred to as "one-one-one". It has been phased out because of its [[Ozone depletion|ozone-depleting]] and [[central nervous system]]-depressing properties.

==Safety concerns==
Cutting fluids have been associated with skin rashes, [[dermatitis]], [[esophagitis]], lung disease, and cancer. These problems result from either toxicity or bacterial or fungal contamination.

Metalworking fluids often contain substances such as [[biocide]]s, [[corrosion inhibitor]]s, metal fines, [[tramp oil]]s, and biological contaminants. Inhalation of cutting fluid aerosols may cause irritation of the throat, nose, and lungs and has been associated with [[chronic bronchitis]], [[asthma]], [[hypersensitivity pneumonitis]] (HP), and worsening of pre-existing respiratory problems. Skin exposure may result from touching contaminated surfaces, handling parts and equipment, splashing fluids, and aerosol mist settling on the skin. Skin contact with cutting fluids may cause allergic contact dermatitis, irritant contact dermatitis, and occupational ("oil") acne.<ref name=hhe>NIOSH (2007). [http://www.cdc.gov/niosh/hhe/reports/pdfs/2005-0227-3049.pdf Health hazard evaluation and technical assistance report: HETA 005-0227-3049], Diamond Chain Company, Indianapolis, Indiana.</ref> 

Safer formulations provide a natural resistance to tramp oils allowing improved filtration separation without removing the base additive package. Ventilation, splash guards on machines, and personal protective equipment can mitigate hazards related to cutting fluids.<ref name=niosh>NIOSH (1998). [http://www.cdc.gov/niosh/98-102.html Criteria for a recommended standard: occupational exposure to metalworking fluids]. Cincinnati, OH: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. DHHS (NIOSH) Pub. No. 98-102.</ref>

[[Bacteria]]l growth is predominant in semi-synthetic and synthetic fluids. Tramp oil along with human hair or skin oil are some of the debris during cutting which accumulates and forms a layer on the top of the liquid, anaerobic bacteria proliferate due to a number of factors. An early sign of the need for replacement is the "Monday-morning smell" (due to lack of usage from Friday to Monday). [[Antiseptic]]s are sometimes added to the fluid to kill bacteria. Such use must be balanced against whether the antiseptics will harm the cutting performance, workers' health, or the environment. Maintaining as low a fluid temperature as practical will slow the growth of microorganisms.<ref name=niosh />

==Degradation{{Anchor|Tramp oil}}==
Cutting fluids degrade over time due to contaminates entering the lubrication system. A common type of degradation is the formation of ''tramp oil'', also known as ''sump oil'', which is unwanted oil that has mixed with cutting fluid. It originates as [[lubrication]] oil that seeps out from the [[slideway]]s and washes into the coolant mixture, as the protective film with which a steel supplier coats [[bar stock]] to prevent rusting, or as [[hydraulic fluid|hydraulic]] oil leaks. In extreme cases it can be seen as a film or skin on the surface of the coolant or as floating drops of oil.

[[Skimmer (machine)|Skimmer]]s are used to separate the tramp oil from the coolant. These are typically slowly rotating vertical discs that are partially submerged below the coolant level in the main reservoir. As the disc rotates the tramp oil clings to each side of the disc to be scraped off by two wipers, before the disc passes back through the coolant. The wipers are in the form a channel that then redirects the tramp oil to a container where it is collected for disposal. Floating [[weir]] skimmers are also used in these situation where temperature or the amount of oil on the water becomes excessive.

Since the introduction of CNC additives, the tramp oil in computerized NC systems coolant reservoir can be managed more effectively through a continuous separation effect. The tramp oil accumulation separates from the aqueous or oil based coolant and can be easily removed with an absorbent.

Old, used cutting fluid must be disposed of when it is fetid or chemically degraded and has lost its usefulness. As with used motor oil or other wastes, its impact on the environment should be mitigated. Legislation and regulation specify how this mitigation should be achieved. Modern cutting fluid disposal involves techniques such as [[ultrafiltration]] using polymeric or ceramic membranes which concentrates the suspended and emulsified oil phase.

==References==
{{Reflist}}

{{DEFAULTSORT:Cutting Fluid}}
[[Category:Coolants]]
[[Category:Metalworking]]
[[Category:Lubricants]]
[[Category:Petroleum products]]
[[Category:Oils]]

[[ca:Taladrina]]
[[cs:Řezná kapalina]]
[[de:Kühlschmiermittel]]
[[es:Aceite de corte]]
[[eu:Taladrina]]
[[ko:절삭유]]
[[ja:切削油]]
[[vi:Dầu cắt gọt kim loại]]
[[Category:2Fix]]