View source for File:Welding power supply-Miller-Syncrowave350LX-front-triddle.jpg

[[Category:Welding equipment]]

{{PD-user-en|:wikiepdia:en:Triddle}}
==Overview==
This is a picture of the front of a Miller Syncrowave 350LX welding power source for [[Gas Tungsten Arc Welding|Gas Tungsten Arc Welding]] and [[Shielded Metal Arc Welding|Shielded Metal Arc Welding]]. This machine has the ability to change [[w:direct current|direct current]] polarities as well as to change from direct current to [[alternating current|alternating current]] welding current with rotation of the switch in the center of the picture. ''Do not switch under load'' is labeled below the switch because operation of the mechanical switch while the high welding current is flowing through it will cause arcing and destruction of the switch components.

==Technical Specifications==
* '''Output Range''': 3 to 400 [[ampere]]s
* '''Weight''': 496 lb (225 kg)
* '''Dimensions''': 36 inches (92 cm) tall, 22 inches (57  cm) wide, 25 inches (64 cm) deep

==Power Label==
For clarification the input power information label reads as follows:
* Volts 200/230/460
* Amps 151/131/67
* KW 17.4
* Phase 1 
* Hertz 50/60