Difference between revisions of "Seam sealant"
m (remove Erik9bot category,outdated, tag and general fixes) |
m (1 revision) |
(No difference)
| |
Latest revision as of 09:08, 20 September 2010
 | This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (December 2009) |
Please help improve this article by expanding it. Further information might be found on the talk page. (January 2007) |
Seam sealants are chemical coating compositions used today in the OEM automotive industry primarily for the purpose of seals against air leaks and to waterproof sheetmetal overlaps that occur in the assembly of a vehicle. Such overlaps are typically decorative rather than structurally supportive. Accordingly, they are usually only spot welded and this process results in a closure that is not air or water tight.
Seam sealants are sprayed or extruded over the joined edges of these overlaps, and they then either cure to a flexible waterproof "seal" by drying (dehydrating) in the case of water borne compositions, or thermoset irreversibly to a flexible adherent seam seal by going through an oven bake in the case of plasticized polyvinylchloride compositions. Most interior seam seals are not visible after the vehicle is finished, because they are covered by carpeting, interior roof "headliner," or decorative trim panels. Exterior seam seals are always painted over and are referred to as "coach joint seals."
