Difference between revisions of "National Centre for the Evaluation of Photoprotection"
m (journal cite formatting using AWB (7016)) |
m (1 revision) |
(No difference)
| |
Latest revision as of 09:10, 20 September 2010
This article is an orphan, as few or no other articles link to it. Please introduce links to this page from related articles; suggestions may be available. (December 2009) |
CNEP is a research center for durability prediction and failures analysis of plastics (polymer) materials.
The increasing use of plastics in daily life and for high tech applications points out the necessity to improve their reliability.
These materials can eventually fail during their service life and it is crucial to be able, like in medicine, to diagnose the cause of the failure and to suggest solutions to solve the problem.
Plastic materials[1] are made of polymer mostly associated with “formulation” products allowing to adjust their basic properties to special use they are made for (fillers, pigments, additives. .. ).
In case of failure, a decisive action is to perform the physicochemical analysis of the defect and eventually (in case of suspicion of oxidation products) to perform adapted artificial or natural ageings allowing the evaluation of their long term behaviour.
Contents
CNEP : a research centre for evaluation of polymer failures
(French) National Centre for the Evaluation of Photoprotection (CNEP)[3] is a subsidiary company of University Blaise Pascal [4] created in 1986 by Professor Jacques Lemaire, former head of Laboratory of Molecular and Macromolecular Photochemistry [5](LPMM) - Clermont-Ferrand (France).
Initially the goal was to transfer the expertise of LPMM on polymer photoageing to industrial companies facing increasing problems of degradation (yellowing – bleaching - physical properties loss … ).
CNEP is today still associated with LPMM but also with many small, medium and world size companies working in various domains of polymer applications[2]. More of 500 failure cases are examined each year by CNEP and expertise on the last twenty years is covering more of 100.000 different polymer formulations.
Progressively with the development of sophisticated analytical tools, CNEP was extending its activity to the direct physicochemical analysis of any failure in polymer material, not only derived from ageing (polymer degradation).
All researches are made under contract with a confidentiality agreement.
Since 10 years CNEP is certified by the French Ministries of Higher Education and Industry as National Centre for Technical Research(CRT). Its contact with the complete chain of plastic production allows CNEP to play also an interfacial role between polymer producers, transformers and constructors bringing :
- collective approach of subjects of common interest ;
- quality control and standardisation ;
- legal and insurance expertise ;
- contemporary artists / restorers / collectors.
CNEP is also applying basic concepts of photochemistry to suggest an original approach of the long term prediction of plastic weathering. SEPAP units described elsewhere (weather testing of polymers and fr:photovieillissement accéléré en SEPAP) provoke, in controlled accelerated relevant conditions, the same chemical evolutions than those which should occur at long term in weathering conditions. Designed in the late seventies and built by ATLAS Germany, SEPAP units are now the base of many standard tests (see [6]).
CNEP approach
The CNEP approach is considering that most of initial polymer failures have a chemical origin which can be detected by specific analysis at the solid state. Among a large panel of analytical techniques located at CNEP or on the campus, those involving non destructive infra red and UV-Visible spectroscopy are particularly developed.
In case of ageing analysis, the knowledge of chemical degradation mechanisms of most polymers allows to follow degradation at very low extent both in natural and accelerated conditions[3][4][5]. Additional informations could also come from the direct analysis of formulation compounds.
CNEP is also developing an expertise on the analysis of the organic matters engaged in works of art [6] as well as for the determination of common initial properties of polymers[7].
See also
plastics
nanocomposite
composite materials
polymer
oxidation
polymer degradation
quality control
standardisation
photochemistry
weather testing of polymers
fr:photovieillissement accéléré en SEPAP
weathering
Notes and references
- ↑ including nanocomposite and composite materials with polymer matrix
- ↑ transports, aeroronautics, energy, building, agriculture, sports & leisures, electronics/electricity, electrical appliances,medical, packaging…
- ↑ Jacques Lemaire,"Predicting polymer durability" in Chemtech, october 1996, 42- 47.
- ↑ Jacques Lemaire, René Arnaud, Jean Luc Gardette, Jacques Lacoste, Henri Seinera (1986). "Zuverlässigkeit der methode der photo-schnellalterung bei polymeren. ( Reliability of the accelerated photoageing method)". Kunststoffe, German Plastics (int Ed.). 76: 149–153.
- ↑ Olivier Haillant, "Polymer weathering: a mix of empiricism and science", Material Testing Product and Technology News, 2006, 36 (76), 3-12 [1]
- ↑ painting, sculptures, archeological sites, monuments, contemporary art, modern and ancient papers, etc
- ↑ gas and water permeability, cristallinity, density, molecular weight, melt flow index, etc (see equipment list on [2])
