Difference between revisions of "File:Welding power supply-Miller-Syncrowave350LX-front-triddle.jpg"
From Self-sufficiency
(Category:Welding equipment {{PD-user-en|:wikiepdia:commoncs:Triddle}} ==Overview== This is a picture of the front of a Miller Syncrowave 350LX welding power source for Gas Tungsten Arc Welding and [[Shielded Metal Arc Wel) |
m |
||
| Line 1: | Line 1: | ||
[[Category:Welding equipment]] | [[Category:Welding equipment]] | ||
| − | {{PD-user-en|:wikiepdia: | + | {{PD-user-en|:wikiepdia:en:Triddle}} |
==Overview== | ==Overview== | ||
This is a picture of the front of a Miller Syncrowave 350LX welding power source for [[Gas Tungsten Arc Welding|Gas Tungsten Arc Welding]] and [[Shielded Metal Arc Welding|Shielded Metal Arc Welding]]. This machine has the ability to change [[w:direct current|direct current]] polarities as well as to change from direct current to [[alternating current|alternating current]] welding current with rotation of the switch in the center of the picture. ''Do not switch under load'' is labeled below the switch because operation of the mechanical switch while the high welding current is flowing through it will cause arcing and destruction of the switch components. | This is a picture of the front of a Miller Syncrowave 350LX welding power source for [[Gas Tungsten Arc Welding|Gas Tungsten Arc Welding]] and [[Shielded Metal Arc Welding|Shielded Metal Arc Welding]]. This machine has the ability to change [[w:direct current|direct current]] polarities as well as to change from direct current to [[alternating current|alternating current]] welding current with rotation of the switch in the center of the picture. ''Do not switch under load'' is labeled below the switch because operation of the mechanical switch while the high welding current is flowing through it will cause arcing and destruction of the switch components. | ||
Latest revision as of 11:19, 20 June 2010
Overview
This is a picture of the front of a Miller Syncrowave 350LX welding power source for Gas Tungsten Arc Welding and Shielded Metal Arc Welding. This machine has the ability to change direct current polarities as well as to change from direct current to alternating current welding current with rotation of the switch in the center of the picture. Do not switch under load is labeled below the switch because operation of the mechanical switch while the high welding current is flowing through it will cause arcing and destruction of the switch components.
Technical Specifications
- Output Range: 3 to 400 amperes
- Weight: 496 lb (225 kg)
- Dimensions: 36 inches (92 cm) tall, 22 inches (57 cm) wide, 25 inches (64 cm) deep
Power Label
For clarification the input power information label reads as follows:
- Volts 200/230/460
- Amps 151/131/67
- KW 17.4
- Phase 1
- Hertz 50/60
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 11:18, 20 June 2010 |  | 2,272 × 1,704 (809 KB) | Jontas (Talk | contribs) | Category:Welding equipment {{PD-user-en|:wikiepdia:commoncs:Triddle}} ==Overview== This is a picture of the front of a Miller Syncrowave 350LX welding power source for Gas Tungsten Arc Welding and [[Shielded Metal Arc Wel |
- You cannot overwrite this file.
File usage
The following page links to this file:
