Difference between revisions of "Aluminum"
From Self-sufficiency
(Created page with '==Working (repairing etc) with Aluminum using a propane torch== There is a product that allows you to repair, weld, seal holes in aluminum with a propane torch.<br/> You heat th…') |
m |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Working (repairing etc) with Aluminum using a propane torch== | ==Working (repairing etc) with Aluminum using a propane torch== | ||
| + | ===Bonding aluminum=== | ||
There is a product that allows you to repair, weld, seal holes in aluminum with a propane torch.<br/> | There is a product that allows you to repair, weld, seal holes in aluminum with a propane torch.<br/> | ||
You heat the base aluminum until the stick melts when touched to the base.<br/> | You heat the base aluminum until the stick melts when touched to the base.<br/> | ||
| Line 6: | Line 7: | ||
It can to drilled, ground etc.<br/> | It can to drilled, ground etc.<br/> | ||
| − | '''Example products: | + | '''Example products:''' |
* http://alumiweld.com | * http://alumiweld.com | ||
* http://www.muggyweld.com | * http://www.muggyweld.com | ||
| + | |||
| + | Products like these are brazing the aluminum.<br/> | ||
| + | They are all zinc alloys, Typically, they have a high tensile strength. | ||
| + | |||
| + | ===oxy-acetylene=== | ||
| + | * With the proper goggles, one can oxy-acetylene weld aluminum just fine...by "professionals" even... | ||
| + | * When welding aluminum there is a bright red / orangish flare and that makes seeing the puddle very hard. In my opinion using filters of different colors to cancel the flare and also lighting with shades of red or orange will make seeing much better | ||
| + | |||
| + | ==Se also== | ||
| + | [[Aluminum Recycling]] | ||
| + | |||
| + | [[Category:Metalworking]] | ||
Latest revision as of 16:54, 23 June 2010
Contents
Working (repairing etc) with Aluminum using a propane torch
Bonding aluminum
There is a product that allows you to repair, weld, seal holes in aluminum with a propane torch.
You heat the base aluminum until the stick melts when touched to the base.
Then you flow on the stick, let it cool and the weld is as tough as the base.
It can to drilled, ground etc.
Example products:
Products like these are brazing the aluminum.
They are all zinc alloys, Typically, they have a high tensile strength.
oxy-acetylene
- With the proper goggles, one can oxy-acetylene weld aluminum just fine...by "professionals" even...
- When welding aluminum there is a bright red / orangish flare and that makes seeing the puddle very hard. In my opinion using filters of different colors to cancel the flare and also lighting with shades of red or orange will make seeing much better
