Difference between revisions of "Mixed-signal integrated circuit"
(→Commercial examples) |
m (1 revision) |
(No difference)
| |
Latest revision as of 13:51, 10 December 2011
A mixed-signal integrated circuit is any integrated circuit that has both analog circuits and digital circuits on a single semiconductor die. [1] [2] [3]
Examples
Typically, mixed-signal chips perform some whole function or sub-function in a larger assembly such as the radio subsystem of a cell phone, or the read data path and laser sled control logic of a DVD player. They often contain an entire system-on-a-chip.
Examples of mixed-signal integrated circuits include data converters using delta-sigma modulation, analog-to-digital converter/digital-to-analog converter using error detection and correction, and digital radio chips. Digitally controlled sound chips are also mixed-signal circuits. With the advent of cellular technology and network technology this category now includes cellular telephone, software radio, LAN and WAN router integrated circuits.
Because of the use of both digital signal processing and analog circuitry, mixed-signal ICs are usually designed for a very specific purpose and their design requires a high level of expertise and careful use of computer aided design (CAD) tools. Automated testing of the finished chips can also be challenging. Teradyne, Agilent, and Texas Instruments are the major suppliers of the test equipment for mixed-signal chips.
The particular challenges of mixed signal include:
- CMOS technology is usually optimal for digital performance and scaling while bipolar transistors are usually optimal for analog performance, yet until the last decade it has been difficult to either combine these cost-effectively or to design both analog and digital in a single technology without serious performance compromises. The advent of technologies like high performance CMOS, BiCMOS, CMOS SOI and SiGe have removed many of the compromises that previously had to be made.
- Testing functional operation of mixed-signal ICs remains complex, expensive and often a "one-off" implementation task.
- Systematic design methodologies comparable to digital design methods are far more primitive in the analog and mixed-signal arena. Analog circuit design can not generally be automated to nearly the extent that digital circuit design can. Combining the two technologies multiplies this complication.
- Fast-changing digital signals send noise to sensitive analog inputs. One path for this noise is substrate coupling. A variety of techniques are used to attempt to block or cancel this noise coupling, such as fully differential amplifiers,[4] P+ guard-rings,[5] differential topology, on-chip decoupling, and triple-well isolation.[6]
Commercial examples
- PSoC - Cypress PSoC Programmable System on Chip
- Atari POKEY
- MOS Technology SID
- Texas Instruments' MSP430
- Triad Semiconductor - Configurable Mixed Signal ASICs
Most modern radio and communications use mixed signal circuits.
References
Cite error: Invalid <references> tag;
parameter "group" is allowed only.
<references />, or <references group="..." />Further reading
- R. Jacob Baker (2009). CMOS Mixed-Signal Circuit Design, Second Edition. http://CMOSedu.com/
- de:Mixed-Signal
- ↑ "mixed-signal (IC's with mixed analog and digital circuits on a single chip)"
- ↑ "A mixed-signal circuit can be defined as a circuit consisting of both digital and analog elements." -- page 1 of "An Introduction to Mixed-Signal IC Test and Measurement" by Mark Burns and Gordon W. Roberts 2001
- ↑ "ESS Mixed Signal Circuits"
- ↑ "Fully differential current-input CMOS amplifier front-endsuppressing mixed signal substrate noise for optoelectronic applications" by Chang, J.J.; Myunghee Lee; Sungyong Jung; Brooke, M.A.; Jokerst, N.M.; Wills, D.S. 1999
- ↑ "Substrate noise issues in mixed-signal chip designs using Spice" by Singh, R.; Sali, S. 1997
- ↑ "Mixed-Signal IC Merges 14-Bit ADC With DSP In 0.18-μm CMOS"
