Difference between revisions of "QF 5.25 inch Mark I naval gun"

From Self-sufficiency
Jump to: navigation, search
(Undid revision 361259363 by 85.115.154.17 (talk))
 
m
 
Line 130: Line 130:
 
[[Category:133 mm artillery]]
 
[[Category:133 mm artillery]]
  
[[de:QF 5,25-inch-Schiffsgeschütz Mark I]]
+
[[Category:2Fix]]

Latest revision as of 20:17, 2 July 2010

QF 5.25 inch Mark I
300px
5.25 in dual turret on HMS Sirius
Type Dual-purpose gun
Place of origin UK
Service history
In service 1940-
Used by Royal Navy
Production history
Designed 1935
Variants Mk I, Mk II
Specifications (bore length)
Weight 9,616 pounds (4,362 kg) barrel & breech
Length 275.5 in total
Barrel length 262.5 inches (6.67 m) bore (50 cal)

Shell Separate QF, 80 pounds (36.29 kg) SAP or HE
Calibre 5.25-inch (133 mm)
Elevation -5 to +70 degrees
Rate of fire 7-8 rpm sustained fire
Muzzle velocity 2,600 feet per second (790 m/s)
Effective range 23,400 yards (21,400 m) at 45 degrees with HE shell

The QF 5.25 inch Mark I gun was the heaviest dual-purpose gun used by the Royal Navy . Although it was a less than completely successful design[1], it saw extensive service during the Second World War.

Design

The QF (quick-firing) 5.25 inch was designed to be a dual-purpose naval gun, for use against ships and aircraft. Combining the secondaries and heavy anti-aircraft armament would allow a significant savings of weight for the King George V class of battleships, which were originally intended to meet the Washington Naval Treaty limit of 35,000 tons. The gun fired an 80 pound shell, considered the largest that a gun crew could handle easily enough to give the rate of fire needed for anti-aircraft use. A class of anti-aircraft cruisers, the Dido class, was also designed using the gun as the main armament. 267 were built, making it the most numerous and important gun in the RN's dual purpose gun inventory. Not enough were available when the first Didos were launched for the full complement of ten guns; priority was given to the battleships. The Bellona class cruisers, a modification of the design of the Dido class, used a highly modified RP10Mk2 mount with Remote Power Control and much improved training and elevating speeds. The number of turrets was reduced from five to four, and the light AA numbers were increased.

Service

The RN Gunnery Pocket Book published in 1945 states: "These guns are combined High Angle and Low Angle Guns. The Mark II Mounting is found in all Dido class cruisers. The Mark I Mounting is found in King George V class battleships, where they fulfil the combined functions of H.A. Long Range Armament and Secondary Armament against surface craft. The main differences between the two mountings lie in the arrangements of the shellrooms and magazines, and the supply of ammunition to the guns. In this chapter, only the Mark II Mounting, as found in Dido class cruisers, is discussed. The 5.25 in. calibre with separate ammunition is used for dual High Angle and Low Angle Armament, since it gives the reasonable maximum weight of shell which can be loaded by the average gun's crew for sustained periods at all angles of elevation. The maximum rate of fire should be 10-12 rounds per minute."[2][3] A wartime account describes HMS Euryalus firing her 5.25 in guns: "We left Suez and headed for the Gulf, where at 1PM the ship's company closed to action-stations and gave a demonstration of the cruiser's fire power to the army officers. Fire was opened with the 10 5.25" guns in the form of a low angle barrage accompanied by fire from smaller guns. Set to burst at 2000 yds range, a terrific barrage was put up for two minutes and we fired some two hundred rounds of 5.25-inch HE...A wall of bursting shell was thrown up just above sea level and I could see that the army officers were impressed..." [4] Unfortunately, the gunhouse was cramped, and the heavy projectile and cartridge cases resulted in a reduced sustained rate of fire from the designed twelve rounds per minute to seven or eight according to post war publications.[5][6][7]However this does not appear to have reduced HMS Euryalus's rate of fire, at least over a one minute period, which would be the typical time for an WW2 AA engagement.[8] The dual mount turret could traverse at 10 degs/sec which was too slow to track quickly enough to engage the higher-speed aircraft of the Second World War, at close ranges.[6] The elevation and traverse rates were still higher than some other contemporary weapons, such as the 4.1" C/31 and C/37 twin mounts carried on the Bismarck and Tirpitz.[9]

These guns performed well on HMS Prince of Wales during Operation Halberd but Prince of Wales was overwhelmed in the loss of Force Z, due to factors unrelated to the 5.25 inch weapon system. [10] No Dido class cruisers were lost in the Battle of Crete, although the Crown Colony class cruiser HMS Fiji and the Town class cruiser HMS Gloucester were both bombed and sunk, after they ran out of AA ammunition. No Dido class cruiser was lost from air attack, although four were sunk by submarine or surface launched torpedoes.[11] HMS Spartan, a Bellona class cruiser, was sunk at anchor in 1944 by a Luftwaffe guided missile.[12]

The gun had a maximum surface range of 24,070 yards[13], and the 80-pound shell was well suited for use against destroyers and small cruisers. However, the gun was used on several occasions against heavier ships, most notably against the German battleship Bismarck.

In 1944, VT-fused shells for the gun became available, making the gun significantly more effective against aircraft.

The RP10 mounting was improved and the fire control upgraded for the installation on the Bellona class cruisers, and the battleships HMS Anson and HMS Vanguard, the latter of which would prove to be the last battleship ever built for the Royal Navy. However, Vanguard never saw action.

Ship classes

Ships with QF 5.25 inch Mark I guns:

Land service

File:5.25 inch gun Port Moresby 1944 AWM 075214.jpeg
Port Moresby, New Guinea, 17 August 1944

In early 1942 the Governor of Gibraltar sought 5.25-in guns for dual anti-aircraft/coast defence role. None were forthcoming. However, later that year AA Command in UK acquired three twin-gun turrets from the Admiralty, these were installed around London in permanent positions. Trials and use led the army to design a single gun mounting in two marks, both with an underground engine room to provide electrical and hydraulic power for traverse, elevation, fuze setting, ramming and other tasks. Fitted with the standard army Machine Fuze Setter No 10 these guns had a rate of fire of 10 rds/min and an effective ceiling of 48,000 ft. Mark 1A was a mild steel turret for AA use only, Mk 1B was an armoured turret for AA/CD use. The gun was designated Mk 2.

By the end of 1943 only 16 of the new guns had been installed, far below projections. By the end of the war 164 guns had been produced. The HE shells were fuzed with the standard army No 208 mechanical time fuze, used with 3.7 and 4.5-inch AA guns. The guns remained in service after World War 2 and in 1953 11 guns were installed in Gibralter. [14][15]

Late in World War II 7 guns were mounted in Australia and 3 in New Guinea in enclosed single-gun AA/CD turrets.[16].

Specifications

  • Bore Diameter: 5.25 inches (133 mm)
  • Barrel Length: 6.668 m (50 calibres)
  • Shell weight: 80 lbs (36.3 kg)
  • Range: 24,070 yds (22,000 m) at 45 degrees
  • Anti Aircraft Ceiling: 46,500 ft (14,170 m)
  • Rate of Fire: Sustained 7-8 rpm, 18 RPM claimed for HMS Vanguard.
  • Penetration: side armour: 3 inches (76 mm) 9,500 yards (8,690 m) or 11,900 m, depending on the sources; the gun was not capable to penetrating 2 inches (51 mm) of deck armour at any range [17]
  • Mounting weight: 78.7 metric tons (varied)
  • Mounting elevation: -5 to +70 degrees
  • Training/Elevating speeds: 10/10 degrees/second and 20/20 in RP10 mounts.

Ammunition

Surviving examples

See also

Notes

Cite error: Invalid <references> tag; parameter "group" is allowed only.

Use <references />, or <references group="..." />

References


Template:WWIIBritishCommNavalWeapons
  1. Page of Navweapons
  2. The Gunnery Pocket Book. 1945. p. 51. 
  3. Sired, Enemy Engaged, p23, states: "The Italians did not press home their attacks very hard and I thought they had a lot to put up with, as each (10 5.25 in gun) cruiser could fire 100 rounds of 5.25" HE shell per minute..." Ronald Sired was a gunnery petty officer onboard HMS Euryalus. The accuracy of Sired's account was praised by Captain FC Flynn RN. Official Historian of the Naval Campaigns in the Mediterranean
  4. Sired, Enemy Engaged, p63.
  5. Williams, Anthony G. "Medium Calibre guns of the Royal Navy in World War II". 
  6. 6.0 6.1 "Britain 5.25"/50 (13.4 cm) QF Mark I". navweaps.com. 
  7. Garzke&Dullin, 1980. pp. 228-229
  8. Hodges, Tribal Class Destroyers, p32: Diagram of High Level Bomber Attack: A 240mph target, at 12 thousand feet altitude could expect to be under for fire about 75 seconds, from the time it enters the effective range of the HACS until it flies to within the minimum range of a 5.25 gun elevated to 70 degrees. A Tribal class destroyer would be able to engage the same target for about 37 seconds.
  9. Navweaps 10.5 cm/65 (4.1") SK C/33
  10. Battleship, Middlebrook
  11. Raven, Dido Class Cruisers
  12. Raven, Dido Class Cruisers
  13. Campbell, Naval Weapons of WW2, p44
  14. Hogg pg. 105-106
  15. Routledge pg 77, 92,204, 207, 432
  16. DW Spethman, "The garrison guns of Australia 1788-1962", pages 145-6. Published by Ron H Mortensen, Inala Qld, 2008. ISBN 978 0 9775990 8 0
  17. Naval Weapons page gives 3 inches at 9,500 yards