Difference between revisions of "Roof edge protection"

Revision as of 15:12, 8 October 2009 (view source) 75.69.0.58 (Talk) (==References== {{reflist}} added)	Latest revision as of 09:19, 20 September 2010 (view source) Jontas (Talk | contribs) m (1 revision)
(No difference)

---

Latest revision as of 09:19, 20 September 2010

Roof edge protection is fall protection equipment most commonly used during the construction of commercial buildings or residential housing. It often consists of a toe board, a main guard rail and an intermediate rail.".^[1]

Legal requirements

Many US federal and state laws require building contractors to implement measures to prevent workers falling from heights. These laws often expressly require the use of edge protection or harness systems.

Edge Protection is often required to meet strict technical safety standards set by Government authorities.

Legal compliance

Depending on occupational safety requirements in any given country or region, the quality of edge protection used on building and construction sites can be examined by government inspectors.

Builders can be prosecuted for using a non compliant height safety protection system.

See also

• Construction site safety
• Occupational safety

References

External links

• Occupational Safety & Health Administration (OSHA) - US
• WorkCover Authority of New South Wales, Australia
• Victorian WorkCover Authority, Australia
• ATF Hire Australia
• Deck Guardrail Australia
• Keepsafe Roof Rail

↑ ,"Policy on working at height - edge protection 7.2.4".