Difference between revisions of "Comb generator"
m (Typo fixing, typos fixed: Eg, → E.g., using AWB) |
m (1 revision) |
(No difference)
| |
Latest revision as of 13:51, 10 December 2011
 | This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (August 2009) |
It has been suggested that this article or section be merged into Frequency comb. (Discuss) Proposed since August 2009. |
A comb generator is a signal generator that produces multiple harmonics of its input signal. The appearance of the output at the spectrum analyzer screen, resembling teeth of a comb, gave the device its name.
Comb generators find wide range of uses in microwave technology. E.g., synchronous signals in wide frequency bandwidth can be produced by a comb generator. The most common use is in broadband frequency synthesizers, where the high frequency signals act as stable references correlated to the lower energy references; the outputs can be used directly, or to synchronize phase-locked loop oscillators. It may be also used to generate a complete set of substitution channels for testing, each of which carries the same baseband audio and video signal.
Comb generators are also used in RFI testing of consumer electronics, where their output is used as a simulated RF emissions, as it is a stable broadband noise source with repeatable output.
An optical comb generator can be used as generators of terahertz radiation. Internally, it is a resonant electro-optic modulator, with the capability of generating hundreds of sidebands with total span of at least 3 terahertz (limited by the optical dispersion of the lithium niobate crystal) and frequency spacing of 17 GHz. Other construction can be based on erbium-doped fiber laser or Ti-sapphire laser often in combination with carrier envelope offset control.
See also:
