Difference between revisions of "Pan Brake"
(Created page with 'Manually driven bending brake A '''brake''' is a metalworking machine that allows the bending of sheet metal. A cornice brake only …') |
m |
||
| Line 27: | Line 27: | ||
== Making a Pan Brake == | == Making a Pan Brake == | ||
| − | * [[ | + | * [[Making a Pan Brake "Folder with fingers" for home by simso]] |
== References == | == References == | ||
Latest revision as of 11:02, 29 August 2010
A brake is a metalworking machine that allows the bending of sheet metal. A cornice brake only allows for simple bends and creases, while a box-and-pan brake also allows one to form box and pan shapes.[1] It is also known as a bending machine or bending brake.
Contents
Description
The brake consists of a flat surface onto which the material is placed, and a clamping bar which will come down and hold the material firmly during the bend. This clamping action may be manual, automatic or operated using a foot pedal. The front, gate-like, plate of the machine is hinged and may be lifted, forcing the material extended over a straight edge to bend to follow the plate.
The bends can be to any angle up to a practical limit of about 120 degrees, somewhat more in the case of a bar folder. If the area to be bent is narrow enough, a sharper bend (e.g., for a hem) can be made by inserting the bend under the clamping bar and lowering it.
Cornice Brake
A cornice brake has a solid clamping bar, the full width of the machine; thus, it can only make straight bends, the entire width of the workpiece.
Box-and-Pan Brake
In a box-and-pan brake, the clamping bar includes several removable blocks, which may be removed and rearranged to permit bending of restricted areas of a piece of sheet metal or of already partially formed pieces.
After bending, a box or pan form is then completed by screw, solder, weld, rivet, or other metal fixing process.
Bar Folder
This is a simplified brake, usually much smaller than cornice or box-and-pan brakes. Typically, a single handle both clamps the workpiece and makes the bend, in a single motion, but the depth is usually much less than what a cornice or box-and-pan brake can handle.
Press brake
This is a more complex tool that forms predetermined bends by clamping the workpiece between a matching punch and die.
Sizes of brakes
Brakes come in sizes suitable for light aluminum or brass for small boxes and operated by hand, up to industrial sized and counterwighted hand operated or hydraulic machines suitable for large sheets of steel.
Making a Pan Brake
References
Cite error: Invalid <references> tag;
parameter "group" is allowed only.
<references />, or <references group="..." />