Polymer engineering
Polymer engineering is generally an engineering field that designs, analyses, and/or modifies polymer materials. Polymer engineering covers aspects of petrochemical industry, polymerization, structure and characterization of polymers, properties of polymers, compounding and processing of polymers and description of major polymers, structure property relations and applications.
Materials
The basic division of polymers into thermoplastics and thermosets helps define their areas of application. The latter group of materials includes phenolic resins, polyesters and epoxy resins, all of which are used widely in composite materials when reinforced with stiff fibres such as fibreglass and aramids. Since crosslinking stabilises the thermosetting matrix of these materials, they have physical properties more similar to traditional engineering materials like steel. However, their very much lower densities compared with metals makes them ideal for lightweight structures. In addition, they suffer less from fatigue, so are ideal for safety-critical parts which are stressed regularly in service.
Thermoplastics have relatively low tensile moduli, but also have low densities and properties such as transparency which make them ideal for consumer products and medical products. They include polyethylene, polypropylene, nylon, acetal resin, polycarbonate and PET, all of which are widely used materials.
Elastomers are polymers which have very low moduli and show reversible extension when strained, a valuable property for vibration absorption and damping. They may either be thermoplastic (in which case they are known as Thermoplastic elastomers) or crosslinked, as in most conventional rubber products such as tyres. Typical rubbers used conventionally include natural rubber, nitrile rubber, polychloroprene, polybutadiene, styrene-butadiene and fluorinated rubbers such as Viton.
Applications
Typical uses of composites are monocoque structures for aerospace and automobiles, as well as more mundane products like fishing rods and bicycles. The stealth bomber was the first all-composite aircraft, but many passenger aircraft like the Airbus and the Boeing 787 use an increasing proportion of composites in their fuselages. The quite different physical properties of composites gives designers much greater freedom in shaping parts, which is why composite products often look different to conventional products. On the other hand, some products such as drive shafts, helicopter rotor blades, and propellers look identical to metal precursors owing to the basic functional needs of such components.
See also
References
| 23px | This section is empty. You can help by adding to it. |
