MakerBot: Parts
From Self-sufficiency
Revision as of 21:36, 9 September 2010 by Jontas (Talk | contribs) (Created page with 'Some details on different parts of the MakerBot. ==Plastruder MK4== ===Suggested spares=== * It is suggested to print spare Insulator Retainer(s) ahead of it breaking. ===Idle…')
Some details on different parts of the MakerBot.
Contents
Plastruder MK4
Suggested spares
- It is suggested to print spare Insulator Retainer(s) ahead of it breaking.
Idler Wheel
The original idler wheel is made from acrylic and (somewhat) prone to cracking.
The dimensions are:
Outer diameter = 41 mm = 1.614in
Inner diameter = 21.9 mm = 0.862in
Thickness = 3.1750 mm = 1/8 in
Insulator Retainer
The original is made from acrylic and prone to breaking (often happens when tightening the screws).
There is a version of this at thingiverse for download
local copy
608 Idler Pulley
It is possible to print your own. This version requires a 608 ball bearing to be inserted.
There is a version of this at thingiverse for download
local copy
