Alinco DJ-180
From Self-sufficiency
Specification
1) General | ||
---|---|---|
Frequency Coverage: | ||
RX: | 137.000 ~ 173.995MHz (T, TM version) | |
TX: | 144.000 ~ 147.995MHz (T, TM version) | |
RX: | 137.000 ~ 173.995MHz (TA, TB, TA2, TB2 version) | |
TX: | 137.000 ~ 173.995MHz (TA, TB, TA2, TB2 version) | |
RX/TX: | 144.000~145.995MHz(TS, TSA, TZ, E, EA, EB version) | |
Frequency Resolution: | 5, 10, 12.5, 15, 20, 25kHz steps | |
Memory Channels: | 10 Channels (standard) | |
Antenna Impedance: | 50 ohm unbalanced | |
Signal Type: | F3E(FM) | |
Power Supply Requirement:DC 5.5V~13.8V (Rated 7.2V Ni-Cd) | ||
Dimensions: | Approximately 132(H) x 58(W) x 33(D) mm | |
Weight : | Approximately 350g | |
2) Transmitter | ||
Output Power: | I 5.0W with Optional 12V Ni-Cd Battery | |
2.0W with Standard 7.2V Ni-Cd Battery | ||
(144.000~147.995MHz) | ||
(160.000~165.000MHz)... TA2, TB2 only | ||
Modulation System: | Variable Reactance Frequency Modulation | |
Max. Frequency Deviation: | +/ -5kHz | |
Tone Frequency: | 67.0 to 250.3Hz -38 Subaudible Encoding Tones | |
(E, EA, EB version: | option) | |
DTMF Encoder: | (TZ, EB version: | option) |
Tone Burst: | (E, EA, EB version only) | |
3) Receiver | ||
Receiver System: | Double-Conversion Superheterodyne | |
Intermediate Frequency.' 1st IF: | 21.4MHz | |
2nd IF: | 455kHz | |
Sensitivity: | 12dB SINAD less than -10dBu | |
(144.000~17.995MHz) | ||
(160.000~165.000MHz)... TA2, TB2 only |