Difference between revisions of "RP100A 3D Pen"
From Self-sufficiency
(Created page with "right * Nozzle: 0.4mm(Removable) * Diameter of faillaments: 1.75mm * With 12V 3A adapter * Weight: 62g * Dimensions: 7.09in x 1.77in x 0.79in...") |
|||
| Line 1: | Line 1: | ||
[[Image:RP100A_3D_Pen.jpg|thumb|right]] | [[Image:RP100A_3D_Pen.jpg|thumb|right]] | ||
| − | + | ==Data== | |
* Nozzle: 0.4mm(Removable) | * Nozzle: 0.4mm(Removable) | ||
* Diameter of faillaments: 1.75mm | * Diameter of faillaments: 1.75mm | ||
| Line 7: | Line 7: | ||
* Weight: 62g | * Weight: 62g | ||
* Dimensions: 7.09in x 1.77in x 0.79in(18cm x 4.5cm x 2cm) | * Dimensions: 7.09in x 1.77in x 0.79in(18cm x 4.5cm x 2cm) | ||
| + | * Heating temperature: 160-250 degrees | ||
| + | |||
| + | |||
| + | ==Usage== | ||
| + | * Starts when the power adapter is connected | ||
| + | * Upper led | ||
| + | ** Orange warming | ||
| + | ** Green ok | ||
| + | * The buttons with arrows are forwards and reverse | ||
| + | * The "volume" looking button controls the extrusion speed | ||
Revision as of 20:25, 7 March 2015
Data
- Nozzle: 0.4mm(Removable)
- Diameter of faillaments: 1.75mm
- With 12V 3A adapter
- Weight: 62g
- Dimensions: 7.09in x 1.77in x 0.79in(18cm x 4.5cm x 2cm)
- Heating temperature: 160-250 degrees
Usage
- Starts when the power adapter is connected
- Upper led
- Orange warming
- Green ok
- The buttons with arrows are forwards and reverse
- The "volume" looking button controls the extrusion speed
