Ablation

Ablation means removal of material from the surface of an object by vaporization, chipping, or other erosive processes. The term occurs in spaceflight associated with atmospheric reentry, in glaciology, medicine, and passive fire protection.

File:Ablation of quartz glass in a flashtube.JPG

Ablation near the electrode in a flashtube. The high energy electrical arc slowly erodes the glass, leaving a frosted appearance.

Spaceflight

Main article: atmospheric reentry § Ablative

In spacecraft design, ablation is used to both cool and protect mechanical parts and/or payloads that would otherwise be damaged by extremely high temperatures. Two principal applications are heat shields for spacecraft entering a planetary atmosphere from space and cooling of rocket engine nozzles. Examples include the Apollo Command Module that protected astronauts from the heat of atmospheric reentry and the Kestrel second stage rocket engine designed for exclusive use in an environment of space vacuum since no heat convection is possible.

In a basic sense, ablative material is designed to slowly burn away in a controlled manner, so that heat can be carried away from the spacecraft by the gases generated by the ablative process; while the remaining solid material insulates the craft from superheated gases. There is an entire branch of spaceflight research involving the search for new fireproofing materials to achieve the best ablative performance; this function is critical to protect the spacecraft occupants and payload from otherwise excessive heat loading. The same technology is used in some passive fire protection applications, in some cases by the same vendors, who offer different versions of these fireproofing products, some for aerospace and some for structural fire protection.

Glaciology

In glaciology and meteorology, ablation--the opposite of accumulation--refers to all processes that remove snow, ice, or water from a glacier or snowfield. Ablation refers to the melting of snow or ice that runs off the glacier, evaporation, sublimation, calving, or erosive removal of snow by wind. Air temperature typically dominantly controls ablation; precipitation exercises secondary control. In a temperate climate during ablation season, ablation rates typically average around 2 mm/hr.

Ablation can refer either to the processes removing ice and snow or to the quantity of ice and snow removed.

Medicine

In medicine, ablation is the same as removal of a part of biological tissue, usually by surgery. Surface ablation of the skin (dermabrasion, also called resurfacing because it induces regeneration) can be carried out by chemicals (which cause peeling) or by lasers. Its purpose is to remove skin spots, aged skin, wrinkles, thus rejuvenating it. Surface ablation is also employed in otolaryngology for several kinds of surgery, such as for snoring. Ablation therapy using radio frequency waves on the heart is used to cure a variety of cardiac arrhythmia such as supraventricular tachycardia, Wolff-Parkinson-White syndrome (WPW), ventricular tachycardia, and more recently as management of atrial fibrillation. The term is often used in the context of laser ablation, a process in which a laser dissolves a material's molecular bonds. For a laser to ablate tissues, the power density or fluence must be high, otherwise thermocoagulation occurs, which is simply thermal vaporization of the tissues.

Rotoablation is a type of arterial cleansing that consists of inserting a tiny, diamond-tipped, drill-like device into the affected artery to remove fatty deposits or plaque. The procedure is used in the treatment of coronary heart disease to restore blood flow.

Radio frequency ablation is a method of removing aberrant tissue from within the body via minimally invasive procedures. i.e.RF ablation in an Electrophysiology study to remove cells that are issuing abnormal electrical activity leading to arrhythmia.

Bone marrow ablation is a process whereby the human bone marrow cells are eliminated in preparation for a bone marrow transplant. This is performed using high-intensity chemotherapy and total body irradiation. As such it has nothing to do with the vaporization techniques described in the rest of this article.

Ablation of brain tissue is used for treating certain neurological disorders, particularly Parkinson's disease, and sometimes for psychiatric disorders as well.

Recently, some researchers reported successful results with genetic ablation. In particular, genetic ablation is potentially a much more efficient method of removing unwanted cells, such as tumor cells, because large numbers of animals lacking specific cells could be generated. Genetically ablated lines can be maintained for a prolonged period of time and shared within the research community. Researchers at Columbia University report of reconstituted caspases combined from C. elegans and humans, which maintain a high degree of target specificity. The genetic ablation techniques described could prove useful in battling cancer.

Biology

Ablation in biology can refer to genetic or cell ablation, for example. Genetic ablation describes a gene that has been silenced. It can be used on purpose in experiments where scientists can observe the effect of genetic silencing. Cell ablation is where individual cells are destroyed for experimental reasons.

Laser ablation

Main article: laser ablation

File:SSY1 Military Surplus Nd-YAG Laser Firing.JPG

An Nd:YAG laser drills a hole through a block of nitrile. The intense burst of infrared radiation ablates the highly absorbing rubber, releasing an eruption of plasma.

Laser ablation is greatly affected by the nature of the material and its ability to absorb energy, therefore the wavelength of the ablation laser should have a minimum absorption depth. While these lasers can average a low power, they can offer peak intensity and fluence given by:

<math>\mbox{Intensity} \ (\mathrm{W}/\mathrm{cm}^2) = \mbox{average power} \ (\mathrm{W}) / \mbox{focal spot area} \ (\mathrm{cm}^2)</math>

<math>\mbox{Peak intensity} \ (\mathrm{W}/\mathrm{cm}^2) = \mbox{peak power} \ (\mathrm{W}) / \mbox{focal spot area} \ (\mathrm{cm}^2)</math>

<math>\mbox{Fluence} \ (\mathrm{J}/\mathrm{cm}^2) = \mbox{laser pulse energy} \ (\mathrm{J}) / \mbox{focal spot area} \ (\mathrm{cm}^2) \,</math>

while the peak power is

<math>\mbox{Peak power} \ (\mathrm{W}) = \mbox{pulse energy} \ (\mathrm{J}) / \mbox{pulse duration} \ (\mathrm{s})</math>

Surface ablation of the cornea for several types of eye refractive surgery is now common, using an excimer laser system (LASIK and LASEK). Since the cornea does not grow back, laser is used to remodel the cornea refractive properties to correct refraction errors, such as astigmatism, myopia, and hyperopia. Laser ablation is also used to remove part of the uterine wall in women with menstruation and adenomyosis problems in a process called endometrial ablation.

Passive fire protection

Firestopping and fireproofing products can be ablative in nature. This can mean endothermic materials, or merely materials that are sacrificial and become "spent" over time while exposed to fire such as silicone firestop products. Given sufficient time under fire or heat conditions, these products char away, crumble, and disappear. The idea is to put enough of this material in the way of the fire that a level of fire-resistance rating can be maintained, as demonstrated in a fire test. Ablative materials usually have a large concentration of organic matter that is reduced by fire to ashes. In the case of silicone, organic rubber surrounds very finely divided silica dust (up to 380 m² of combined surface area of all the dust particles per gram of this dust). When the organic rubber is exposed to fire it burns to ash and leaves behind the silica dust with which the product started.

Marine Surface Coatings

Antifouling paints and other related coatings are routinely used to prevent the buildup of microorganisms and other animals, such as barnacles for the bottom hull surfaces of recreational, commercial and military sea vessels. Ablative paints are often utilized for this purpose to prevent the dilution or deactivation of the antifouling agent. Over time, the paint will slowly decompose in the water, exposing fresh antifouling compounds on the surface. Engineering the antifouling agents and the ablation rate can produce long-lived protection from the deleterious effects of biofouling.

External links

• Physics of laser ablation
• Lasik Laser Eye Surgery. USA Food an Drugs Administration info.
• Physical Modalities, Including Laser. eMedicine index of articles on the subject.
• Chemical Peeling. American Society for Dermatological Surgery.
• Heart Arrhythmias Respond to Ablation UCLA Healthcarebn:অপক্ষরণ

zh:燒蝕