Bessel filter

Linear analog electronic filters
Network synthesis filters Butterworth filter Chebyshev filter Elliptic (Cauer) filter Bessel filter Gaussian filter Optimum "L" (Legendre) filter Linkwitz-Riley filter Image impedance filters Constant k filter m-derived filter General image filters Zobel network (constant R) filter Lattice filter (all-pass) Bridged T delay equaliser (all-pass) Composite image filter mm'-type filter Simple filters RC filter RL filter LC filter RLC filter

In electronics and signal processing, a Bessel filter is a type of linear filter with a maximally flat group delay (maximally linear phase response). Bessel filters are often used in audio crossover systems. Analog Bessel filters are characterized by almost constant group delay across the entire passband, thus preserving the wave shape of filtered signals in the passband.

The filter's name is a reference to Friedrich Bessel, a German mathematician (1784–1846), who developed the mathematical theory on which the filter is based. The filters are also called Bessel–Thomson filters in recognition of W. E. Thomson, who worked out how to apply Bessel functions to filter design.

The transfer function

File:Bessel4 GainDelay.png

A plot of the gain and group delay for a fourth-order low pass Bessel filter. Note that the transition from the pass band to the stop band is much slower than for other filters, but the group delay is practically constant in the passband. The Bessel filter maximizes the flatness of the group delay curve at zero frequency.

A Bessel low-pass filter is characterized by its transfer function:

<math>H(s) = \frac{\theta_n(0)}{\theta_n(s/\omega_0)}\,</math>

where <math>\theta_n(s)</math> is a reverse Bessel polynomial from which the filter gets its name and <math>\omega_0</math> is a frequency chosen to give the desired cut-off frequency. The filter has a low-frequency group delay of <math>1 / \omega_0</math>.

Bessel polynomials

File:Bessel 3rd-order poles.svg

The roots of the third-order Bessel polynomial are the poles of filter transfer function in the s plane, here plotted as crosses.

The transfer function of the Bessel filter is a rational function whose denominator is a reverse Bessel polynomial, such as the following:

<math>n=1; \quad s+1</math>

<math>n=2; \quad s^2+3s+3</math>

<math>n=3; \quad s^3+6s^2+15s+15</math>

<math>n=4; \quad s^4+10s^3+45s^2+105s+105</math>

<math>n=5; \quad s^5+15s^4+105s^3+420s^2+945s+945</math>

The reverse Bessel polynomials are given by:

<math>\theta_n(s)=\sum_{k=0}^n a_ks^k,</math>

where

<math>a_k=\frac{(2n-k)!}{2^{n-k}k!(n-k)!} \quad k=0,1,\ldots,n.</math>

Example

File:Bessel 3rd-order gain.svg

Gain plot of the third-order Bessel filter, versus normalized frequency

File:Bessel 3rd-order delay.svg

Group delay plot of the third-order Bessel filter, illustrating flat unit delay in the passband

The transfer function for a third-order (three-pole) Bessel low-pass filter, normalized to have unit group delay, is

<math>H(s)=\frac{15}{s^3+6s^2+15s+15}.</math>

The roots of the denominator polynomial, the filter's poles, include a real pole at s = −2.3222, and a complex-conjugate pair of poles at s = −1.8389 ± j1.7544, plotted above. The numerator 15 is chosen to give a gain of 1 at DC (at s = 0).

The gain is then

<math>G(\omega) = |H(j\omega)| = \frac{15}{\sqrt{\omega^6+6\omega^4+45\omega^2+225}}. \, </math>

The phase is

<math>\phi(\omega)=-\arg(H(j\omega))=

-\arctan\left(\frac{15\omega-\omega^3}{15-6\omega^2}\right). \, </math>

The group delay is

<math>D(\omega)=-\frac{d\phi}{d\omega} =

\frac{6 \omega^4+ 45 \omega^2+225}{\omega^6+6\omega^4+45\omega^2+225}. \, </math>

The Taylor series expansion of the group delay is

<math>D(\omega) = 1-\frac{\omega^6}{225}+\frac{\omega^8}{1125}+\cdots.</math>

Note that the two terms in ω² and ω⁴ are zero, resulting in a very flat group delay at ω = 0. This is the greatest number of terms that can be set to zero, since there are a total of four coefficients in the third order Bessel polynomial, requiring four equations in order to be defined. One equation specifies that the gain be unity at ω = 0 and a second specifies that the gain be zero at ω = ∞, leaving two equations to specify two terms in the series expansion to be zero. This is a general property of the group delay for a Bessel filter of order n: the first n − 1 terms in the series expansion of the group delay will be zero, thus maximizing the flatness of the group delay at ω = 0.

See also

• Butterworth filter
• Comb filter
• Chebyshev filter
• Elliptic filter
• Bessel function
• Group delay and phase delay

External links

• http://www.filter-solutions.com/bessel.html
• http://www.rane.com/note147.html
• http://www.crbond.com/papers/bsf.pdf
• http://www-k.ext.ti.com/SRVS/Data/ti/KnowledgeBases/analog/document/faqs/bes.htmca:Filtre de Bessel