Clapboard (architecture)
It has been suggested that this article or section be merged with Weatherboarding. (Discuss) Proposed since June 2009. |
This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (April 2008) |
Clapboard, also known as bevel siding or lap siding or weather-board (with regional variants as to the exact definitions of these terms), is a board used typically for exterior horizontal siding that has one edge thicker than the other and where the board above laps over the one below. It is often found in New England architecture.
Clapboard siding got its name from the Dutch Klappen, meaning to split. It was originally split by hand from logs in a radial manner. Later, the boards were radially sawn in a mill.
In Danbury, Connecticut,a street by the name of "Clapboard Ridge" appears to pay homage to this distinctive architectural technique.
In Australia and New Zealand, this kind of cladding is known as weatherboard, and was extensively used in forested regions from the Colonial period to the mid-20th Century.
In newer, cheaper construction, clapboard is often imitated as "siding" made of vinyl, aluminum, or fiber cement.
40x30px | This architecture-related article is a stub. You can help ssf by expanding it. |
30px | This article about joinery, woodworking joints, carpentry or woodworking is a stub. You can help ssf by expanding it. |