Fiber roll

From Self-sufficiency
Jump to: navigation, search
File:Fiber roll EPA.jpg
Installation detail for fiber rolls with specifications recommended by U.S. EPA.[1]

A fiber roll is a temporary erosion control and sediment control device used on construction sites to protect water quality in nearby streams, rivers, lakes and bays from sediment erosion. It is made of straw, coconut fiber or similar material formed into a tubular roll.

Each horizontal contour level row of fiber rolls is installed on slopes, ending with one at the base of the slope, below an active construction area before soil disturbance (earth moving) begins. The space between each row of fiber roll is dependent on the steepness of the slope. The steeper the slope, the more rows of evenly spaced horizontal contour level fiber rolls are needed. Each fiber roll is installed on a horizontal contour level in shallow trenches 2 to 4 inches (5 to 10 cm) deep and fastened to the ground with wooden stakes.

Properly installed fiber rolls are effective at trapping sediment, generally more effectively than straw bales.[2][3] During rain storms, the rolls intercept surface stormwater runoff (but not concentrating or channeling the runoff) and reduce the velocity of flow. Water passes through a fiber roll while leaving behind the sediment on the uphill side of the roll, thereby reducing sediment erosion.

See also

References

Cite error: Invalid <references> tag; parameter "group" is allowed only.

Use <references />, or <references group="..." />

External links

  • U.S. Environmental Protection Agency (EPA). Washington, DC. “Developing Your Stormwater Pollution Prevention Plan: A Guide for Construction Sites.” Document No. EPA-833-R-060-04. May 2007.
  • California Stormwater Quality Association. Menlo Park, CA. "California Stormwater BMP Handbook: Fiber Rolls." Fact Sheet No. SE-5. January 2003.
  • U.S. EPA. "National Menu of Stormwater Best Management Practices: Fiber Rolls." June 1, 2006.