Gunderson Do-All Machine
The Gunderson Do-All Machine is a colorful, interconnected network of dozens of machines that have been cross-sectioned to reveal their internal operating mechanisms. It was designed by Mark Gunderson to illustrate mechanical concepts.
Contents
History and design
The Gunderson Do-All Machine includes more than 30 individual machines that are linked together by an array of belts, gears, pulleys, and transmissions. Collectively, they operate in a continuous chain reaction on the power of one 10-horsepower (7.5 kW) Whitte gas oil well engine, forming a kinetic sculpture. The entire network is mounted on a 15-foot (4.6 m) flat bed trailer platform, so that it can be transported to engine shows, educational venues, and county fairs. The combined weight of the trailer and all components is about 6000 pounds.
The Do-All's layout and design allows one to follow the chain reaction from machine to machine while observing the internal cogs, gears and other components that make them work. The variety of machines include an automatically reversing worm gear, a water pump impellar, a governor/gas valve from a 20-horsepower (HP) JC engine, a blacksmith blower/bubble maker, the main line shaft and pulley from an antique corn grinder, a floating gear, a DC 110-volt generator and lights, a 38-to-1 gear reducer, a bicycle light generator, and a fan blower painted to look like a clown. Recent additions include a penny press that creates a commemorative Do-All Machine coin and a rotating satellite dish with sun and moon images painted on opposite sides.
Major engine components
The Gunderson Do-All includes the following major engines that have been cut away to reveal their inner workings in action:
- Wright Cyclone R2600 1700 horsepower Radial Engine from a B-25 Bomber
- Wankel Rotary Engine from a Mazda RX-7
- TransAm V-8 Engine 301 Cu. In.ttom)
- Jeep CJ5 Transmission
Gallery
- B-25 Bomber Cyclone Engine.jpg
Cross-section of Wright Cyclone Engine from B-25 Bomber
- Wankel Rotary Engine from Mazda RX-7.jpg
Cut away view of triangular Wankel Rotary Engine from Mazda RX-7 automobile
- Close Front View of Do-All.jpg
Cut away top view of Trans Am V-8 Engine mounted to the left of a Jeep CJ5 transmission with gearbox open
- Wankel Cycle anim en.gif
An animated demonstration of the unique Wankel triangular design in action
See also
References
- Gunderson R. The Do-All Machine. Gas Engine Magazine. December, 1999; Vol. 34:12, pages 16-18.
External links
- Carter County Old-time Machinery and Antiques Annual Show, Ashland, Kentucky – story, interview and slide show of self-trained mechanical engineer, Mark Gunderson, and the Gunderson Do-All Machine.
- Article
- Slideshow and interview
- Mark Gunderson’s Do-All Machine - Making its first appearance at Rough and Tumble Engineers Historical Association Threshermans Reunion
- Gunderson Do-All Machine
- Tri-State Old Engine Show – Portland, Indiana. 2003
- Tri-State Old Engine Show – Portland, Indiana. 2003 (more)
