Hurricane clip
A Hurricane clip is a connecting device that provides a continuous structural load transfer path from the top of a building to its foundation, helping to protect buildings from damage resulting from high wind. Primarily used in areas affected by hurricanes, the devices are generally suitable for any area that may be impacted by windstorm damage.
Among the most common style used along the gulf coast area fasten plywood or OSB over the windows and openings of brick-construction homes. The simple devices are easy to install, are removable and reusable, with solutions generally less expensive than storm shutters.
Hurricane clips meet the minimum requirements for code approval and are only as strong as their weakest install point; generally ½ the strength of the wood.
Cable-based Hurricane Clips
Cable based hurricane clips provide an easy to install alternative to traditional hurricane clips, while still providing superior strength far exceeding that of the surrounding wood framing. Cable-based systems use flexible cable (up to 6,700 lbs tensile strength that can be cut on-site for installation to any wall height, enabling a 60-70% labor savings over other systems.[1]
Cable systems install in less than half the time of typical threaded‐rod systems. Because the cable is cut-to-length during installation, there is no wasted material.
Cable systems are built for modularity, facilitating simple installation of two-story and basement constructions with connections at each floor. Cable systems allow for quick disassembly for temporary or semi-permanent installations such as jobsites, trailers, and mobile homes.
References
Cite error: Invalid <references> tag;
parameter "group" is allowed only.
<references />, or <references group="..." />| 40x30px | This technology-related article is a stub. You can help ssf by expanding it. |
- ↑ "Securing Your Home For Hurricanes". Cable-Tite Secure Tie-Down Systems. Retrieved 2009-05-26.
