Hydraulic press

From Self-sufficiency
Jump to: navigation, search

A hydraulic press is a machine (see machine press) using a hydraulic cylinder to generate a compressive force. It uses the hydraulic equivalent of a mechanical lever, and was also known as a Bramah press after the inventor, Joseph Bramah, of England. He invented and was issued a patent on this press in 1795. As Bramah (who is also known for his development of the flush toilet) installed toilets, he studied the existing literature on the motion of fluids and put this knowledge into the development of the press.[1]

Principle

The hydraulic press depends on Pascal's principle: the pressure throughout a closed system is constant. One part of the system is a piston acting as a pump, with a modest mechanical force acting on a small cross-sectional area; the other part is a piston with a larger area which generates a correspondingly large mechanical force. Only small-diameter tubing (which more easily resists pressure) is needed if the pump is separated from the press cylinder.

Pascal's law: Pressure on a confined fluid is transmitted undiminished and acts with equal force on equal areas and at 90 degrees to the container wall.

A fluid, such as oil, is displaced when either piston is pushed inward. The small piston, for a given distance of movement, displaces a smaller amount of volume than the large piston, which is proportional to the ratio of areas of the heads of the pistons. Therefore, the small piston must be moved a large distance to get the large piston to move significantly. The distance the large piston will move is the distance that the small piston is moved divided by the ratio of the areas of the heads of the pistons. This is how energy, in the form of work in this case, is conserved and the Law of Conservation of Energy is satisfied. Work is force times distance, and since the force is increased on the larger piston, the distance the force is applied over must be decreased.

The pressurized fluid used, if not generated locally by a hand or mechanically-powered pump, can be obtained by opening a valve which is connected to a hydraulic accumulator or a continuously-running pump whose pressure is regulated by a relief valve. When it is desired to generate more force than the available pressure would allow, or use smaller, higher-pressure cylinders to save size and weight, a hydraulic intensifier can be used to increase the pressure acting on the press cylinder.

When the pressure on the press cylinder is released (the fluid returning to a reservoir), the force created in the press is reduced to a low value (which depends on the friction of the cylinder's seals. The main piston does not retract to its original position unless an additional mechanism is employed.

File:Hydraulic Press.png
Hydraulic Press in a machine shop. This press is commonly used for hydroforming.

See also

References

Cite error: Invalid <references> tag; parameter "group" is allowed only.

Use <references />, or <references group="..." />

External links

ca:Premsa hidràulica

cs:Hydraulický lis de:Hydraulische Presse el:Υδραυλικό πιεστήριο es:Prensa hidráulica fr:Presse hydraulique hi:हाइड्रालिक प्रेस it:Pressa idraulica hu:Hidraulikus kovácssajtó pl:Prasa hydrauliczna pt:Prensa hidráulica ru:Гидравлический пресс fi:Hydraulinen muovaus

uk:Гідравлічний прес
  1. Carlisle, Rodney (2004). Scientific American Inventions and Discoveries, p. 266. John Wiley & Sons, Inc., New Jersey. ISBN 0471244104.