Masonry
Masonry is the building of structures from individual units laid in and bound together by mortar; the term masonry can also refer to the units themselves. The common materials of masonry construction are brick, stone such as marble, granite, travertine, limestone; concrete block, glass block, stucco, and tile. Masonry is generally a highly durable form of construction. However, the materials used, the quality of the mortar and workmanship, and the pattern in which the units are assembled can significantly affect the durability of the overall masonry construction.
Masonry units, such as brick, tile, stone, glass brick or concrete block generally conform to the requirements specified in the 2003 International Building Code (IBC) Section 2103.
Contents
Applications
Masonry is commonly used for the walls of buildings, retaining walls and monuments. Brick and concrete block are the most common types of masonry in use in industrialized nations and may be either weight-bearing or a veneer. Concrete blocks, especially those with hollow cores, offer various possibilities in masonry construction. They generally provide great compressive strength, and are best suited to structures with light transverse loading when the cores remain unfilled. Filling some or all of the cores with concrete or concrete with steel reinforcement (typically rebar) offers much greater tensile and lateral strength to structures.
Advantages
- The use of materials such as brick and stone can increase the thermal mass of a building, giving increased comfort in the heat of summer and the cold of winter, and can be ideal for passive solar applications.
- Brick typically will not require painting and so can provide a structure with reduced life-cycle costs, although sealing appropriately will reduce potential spalling due to frost damage. Non-decorative concrete block generally is painted or stuccoed if exposed.
- The appearance, especially when well crafted, can impart an impression of solidity and permanence.
- Masonry is very heat resistant and thus provides good fire protection.
- Masonry walls are more resistant to projectiles, such as debris from hurricanes or tornadoes than walls of wood or other softer, less dense materials.
- Unreinforced Masonry structure built in compression with (Preferably in lime mortar) has the life of more than 500 years as compared to 30 to 100 for steel or RCC structure.
Disadvantages
- Extreme weather causes degradation of masonry wall surfaces due to frost damage. This type of damage is common with certain types of brick, though rare with concrete blocks. If non-concrete (clay-based) brick is to be used, care should be taken to select bricks suitable for the climate in question.
- Masonry tends to be heavy and must be built upon a strong foundation (usually reinforced concrete) to avoid settling and cracking. If expansive soils (such as adobe clay) are present, this foundation needs to be quite elaborate and the services of a qualified structural engineer may be required, particularly in earthquake prone regions.
Structural limitations
Masonry boasts an impressive compressive strength (vertical loads) but is much lower in tensile strength (twisting or stretching) unless reinforced. The tensile strength of masonry walls can be strengthened by thickening the wall, or by building masonry piers (vertical columns or ribs) at intervals. Where practical, steel reinforcements can be added.
Veneer masonry
A masonry veneer wall consists of masonry units, usually clay-based bricks, installed on one or both sides of a structurally independent wall usually constructed of wood or masonry. In this context the brick masonry is primarily decorative, not structural. The brick veneer is generally connected to the structural wall by brick ties (metal strips that are attached to the structural wall, as well as the mortar joints of the brick veneer). There is typically an air gap between the brick veneer and the structural wall. As clay-based brick is usually not completely waterproof, the structural wall will often have a water-resistant surface (usually tar paper) and weep holes can be left at the base of the brick veneer to drain moisture that accumulates inside the air gap. Concrete blocks, real and cultured stones, and veneer adobe are sometimes used in a very similar veneer fashion.
Most insulated buildings that utilize concrete block, brick, adobe, stone, veneers or some combination thereof feature interior insulation in the form of fiberglass batts between wooden wall studs or in the form of rigid insulation boards covered with plaster or drywall. In most climates this insulation is much more effective on the exterior of the wall, allowing the building interior to take advantage of the aforementioned thermal mass of the masonry. This technique does, however, require some sort of weather-resistant exterior surface over the insulation and, consequently, is generally more expensive.
Dry set masonry
The strength of a masonry wall is not entirely dependent on the bond between the building material and the mortar; the friction between the interlocking blocks of masonry is often strong enough to provide a great deal of strength on its own. The blocks sometimes have grooves or other surface features added to enhance this interlocking, and some dry set masonry structures forgo mortar altogether.
Solid masonry
Solid masonry, without steel reinforcement, tends to have very limited applications in modern wall construction. While such walls can be quite economical and suitable in some applications, susceptibility to earthquakes and collapse is a major issue. Solid unreinforced masonry walls tend to be low and thick as a consequence.
Brick
Solid brickwork is made of two or more layers of bricks with the units running horizontally (called stretcher bricks) bound together with bricks running transverse to the wall (called "header" bricks). Each row of bricks is known as a course. The pattern of headers and stretchers employed gives rise to different bonds such as the common bond (with every sixth course composed of headers), the English bond, and the Flemish bond (with alternating stretcher and header bricks present on every course). Bonds can differ in strength and in insulating ability. Vertically staggered bonds tend to be somewhat stronger and less prone to major cracking than a non-staggered bond.
Uniformity and rusticity
The wide selection of brick styles and types generally available in industrialized nations allow much variety in the appearance of the final product. In buildings built during the 1950s-1970s, a high degree of uniformity of brick and accuracy in masonry was typical. In the period since then this style was thought to be too sterile, so attempts were made to emulate older, rougher work. Some brick surfaces are made to look particularly rustic by including burnt bricks, which have a darker color or an irregular shape. Others may use antique salvage bricks, or new bricks may be artificially aged by applying various surface treatments, such as tumbling. The attempts at rusticity of the late 20th century have been carried forward by masons specializing in a free, artistic style, where the courses are intentionally not straight, instead weaving to form more organic impressions.
Serpentine masonry
A crinkle-crankle wall is a brick wall that follows a serpentine path, rather than a straight line. This type of wall is more resistant to toppling than a straight wall; so much so that it may be made of a single thickness of unreinforced brick and so despite its longer length may be more economical than a straight wall.
Concrete block
Blocks of cinder concrete (cinder blocks or breezeblocks), ordinary concrete (concrete blocks), or hollow tile are generically known as Concrete Masonry Units (CMU)s. They usually are much larger than ordinary bricks and so are much faster to lay for a wall of a given size. Furthermore, cinder and concrete blocks typically have much lower water absorption rates than brick. They often are used as the structural core for veneered brick masonry, or are used alone for the walls of factories, garages and other industrial style buildings where such appearance is acceptable or desirable. Such blocks often receive a stucco surface for decoration. Surface-bonding cement, which contains synthetic fibers for reinforcement, is sometimes used in this application and can impart extra strength to a block wall. Surface-bonding cement is often pre-coloured and can be stained or painted thus resulting in a finished stucco-like surface.
The primary structural advantage of concrete blocks in comparison to smaller clay-based bricks is that a CMU wall can be reinforced by filling the block voids with concrete with or without steel rebar. Generally, certain voids are designated for filling and reinforcement, particularly at corners, wall-ends, and openings while other voids are left empty. This increases wall strength and stability more economically than filling and reinforcing all voids. Typically, structures made of CMUs will have the top course of blocks in the walls filled with concrete and tied together with steel reinforcement to form a bond beam. Bond beams are often a requirement of modern building codes and controls . Another type of steel reinforcement, referred to as ladder-reinforcement, can also be embedded in horizontal mortar joints of concrete block walls. The introduction of steel reinforcement generally results in a CMU wall having much greater lateral and tensile strength than unreinforced walls.
CMUs can be manufactured to provide a variety of surface appearances. They can be colored during manufacturing or stained or painted after installation. They can be split as part of the manufacturing process, giving the blocks a rough face replicating the appearance of natural stone, such as brownstone. CMUs may also be scored, ribbed, sandblasted, polished, striated (raked or brushed), include decorative aggregates, be allowed to slump in a controlled fashion during curing, or include several of these techniques in their manufacture to provide a decorative appearance. [1]
"Glazed concrete masonry units are manufactured by bonding a permanent colored facing (typically composed of polyester resins, silica sand and various other chemicals) to a concrete masonry unit, providing a smooth impervious surface." [2]
Glass block or glass brick are blocks made from glass and provide a translucent to clear vision through the block.
A-Jacks
A-jacks (used in erosion control walls and sea walls) are highly stable, concrete 6-pronged armor units designed to interlock into a flexible, highly permeable matrix. They can be installed either randomly or in a uniform pattern. They look like giant 3-foot versions of the metal jacks that children play with.
In the uniform placement pattern, each unit is in contact with the six adjacent units, providing high stability. They are patterned after the buckyball model[3].
Stonework
Stone blocks used in masonry can be dressed or rough. Stone masonry utilizing dressed stones is known as ashlar masonry, whereas masonry using irregularly shaped stones is known as rubble masonry. Both rubble and ashlar masonry can be laid in courses (rows of even height) through the careful selection or cutting of stones, but a great deal of stone masonry is uncoursed.
Natural stone veneers over CMU, cast-in-place, or tilt-up concrete walls are widely used to give the appearance of stone masonry.
Sometimes river rock (smooth oval-shaped stones) is used as a veneer. This type of material is not favored for solid masonry as it requires a great amount of mortar and can lack intrinsic structural strength.
Manufactured-stone, or cultured stone, veneers are popular alternatives to natural stones. Attractive natural stone has become more expensive in many areas and in some areas is practically unavailable. Manufactured-stone veneers are typically made from concrete. Natural stones from quarries around the world are sampled and recreated using molds, aggregate, and colorfast pigments. To the casual observer there may be no visual difference between veneers of natural and manufactured stone.
- RusticSandstoneMasonry4895.jpg
Rustic use of sandstone of varying color and size - City wall close.jpg
- City wall close2.jpg
City wall in Worms, Germany - City wall close3.jpg
City wall in Valence, Drôme, France using river rock - Masonry close2.jpg
From castle in Germany - Masonry close.jpg
From castle in France - Masonry close3.jpg
From Heidelberg Castle - Masonry close4.jpg
From Heidelberg Castle - ParthenonRepairDetail06163.JPG
Marble repair, Parthenon - DelphiRandomStonework06271.JPG
Ancient stonework, Delphi - Teleferik 001.jpg
Old wall, Izmir, Turkey - CuscoPiedra12angulo.jpg
Ancient Inca wall
Gabions
Gabions are rectangular wire baskets, usually of zinc-protected steel (galvanized steel) that are filled with fractured stone of medium size. These will act as a single unit and are stacked with setbacks to form a revetment or retaining wall. They have the advantage of being both well drained and flexible, and so resistant to flood, water flow from above, frost damage, and soil flow. Their expected useful life is only as long as the wire they are composed of and if used in severe climates (such as shore-side in a salt water environment) must be made of appropriate corrosion-resistant wire.
Bagged concrete
A low grade concrete may be placed in woven plastic sacks similar to that used for sandbags and then emplaced. The sacks are then watered and the emplacement then becomes a series of artificial stones that conform to one another and to adjacent soil and structures. This conformation makes them resistant to displacement. The sack becomes non-functional and eventually disintegrates. This type of masonry is frequently used to protect the entrances and exits of water conduits where a road passes over a stream or dry wash. It is also used to protect stream banks from erosion, especially where a road passes close by.
Masonry training
Stonemasonry is one of the oldest professions in the history of construction. As such it is regarded as a traditional skill, and is one which is in heavy demand.
Prospective stonemasons will learn the profession through apprenticeships or a traineeship that will last 3 to 4 years. There are City & Guilds stonemasonry courses available that combine college based theory training with practical learning.
Passive fire protection (PFP)
Masonry walls have an endothermic effect of its hydrates, as in chemically bound water, as well as unbound moisture from the concrete block, as well as the poured concrete if the hollow cores inside the blocks are filled.
See also
References
Cite error: Invalid <references> tag;
parameter "group" is allowed only.
<references />, or <references group="..." />External links
| 40x40px | Wikimedia Commons has media related to [[commons:Category:{{#property:P373}}|Masonry]]. |
- Masonry project on medieval bridge
- Professional Masonry Installation
- Mason Contractors Association of America
- International Masonry Institute
- International Union of Bricklayers and Allied Craftworkers
- National Concrete Masonry Association
- Information on design and analyses of masonry walls
- Masonry Institute of Americaca:Maçoneria
cs:Zdivo de:Mauerwerk es:Albañilería fr:Maçonnerie gl:Albanelaría ko:조적조 it:Muratura he:בנייה בלבנים la:Murus nl:Metselen no:Murer (yrkestittel) pl:Murarstwo pt:Alvenaria qu:Pirqaq ru:Каменная кладка
sv:Murverk
