Screw gun
This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (August 2007) |
Screw guns are similar to the power drill, at least in apperance. There are two basic types. Some screw guns are designed for drywall installation, some for general construction purposes. A drywall screw gun will turn as high as 4,000 RPM's, while a screw gun designed for larger screws and other fasteners, also known as drivers, will turn around 2,500 RPM's. These drivers generally have a high amperage motor as well, giving them more power for working with larger fasteners. Driving a 4" screw with a dywall gun into framing materials would be over working the tool, but is no problem for the impact driver. [1]
A drywall screw gun is a tool used to install sheetrock, also known as drywall. Screw guns look like a normal drill although they have a "nose" as opposed to a chuck. The nose holds an interchangeable 0.25 inches (6 mm) shank bit, commonly known as a tip. Most commonly used is a 1 inch (25 mm) #2 phillips.
The nose on both types can be adjusted to countersink screws to desired depth. Pressure must be applied to the bit in order to engage the clutch and drive the screws. Some screw gun users like to keep their motor running constantly, while installing drywall, and this practice is recommended by manufacturers. There are screw guns which auto-feed screws from a clip. Decking screw guns have a long handle so the tradesman does not have to bend over.
See also
References
Cite error: Invalid <references>
tag;
parameter "group" is allowed only.
<references />
, or <references group="..." />
- Lee Jesberger (2010). Pro Remodelinging Tips.com.
External links
40x40px | Look up screw gun in Wiktionary, the free dictionary. |
Tool Tips] Pro Remodeling Tips.com
40x30px | This tool article is a stub. You can help ssf by expanding it. |
it:Avvitatore pl:Wkrętarka ru:Шуруповёрт
sv:Skruvdragare- ↑ Pro Remodeling Tips.com