Search results

From Self-sufficiency
Jump to: navigation, search
  • ...u use the indirect method, which burns the gasses, and use a clean burning fuel (such as natural or LP gas) the emissions are mostly water vapors with very ...at I have a Weber Smoky Mountain, though, charcoal quality, impurities and additives become very important. It is a great little cooker and will do everything f
    9 KB (1,717 words) - 19:40, 2 July 2010
  • ...electrolytic reactions of anodic oxidation and cathodic reduction, organic additives generate unwanted break down products in solution. Their excessive build up ===Fuel storage===
    41 KB (5,738 words) - 16:47, 27 September 2010
  • ...cts, d-limone, flavors, fragrances, essential oils, surfactants, polishes, additives, graffiti cleaning products, pre-emergents, stone and tile care products, w ...th state and federal regulations. An example would be fluorination plastic fuel tanks used for lawn and garden equipment, automobiles, etc.
    9 KB (1,285 words) - 15:54, 15 April 2013
  • However, it does occur in many other safety-critical items such as [[fuel line]]s and rubber [[Seal (mechanical)|seal]]s, such as [[gaskets]] and [[O ...will grow from the outside exposed surfaces into the bore of the pipe, so fuel leakage and fire may follow.
    8 KB (1,277 words) - 10:09, 20 September 2010
  • ...ptible to ozone attack, and can cause problems like car fires (from rubber fuel lines) and tire blow-outs. Nowadays, anti-ozonants are widely added to thes *Lewis, P R and Hainsworth S, ''Fuel Line Failure from stress corrosion cracking'', Engineering Failure Analysis
    9 KB (1,340 words) - 10:10, 20 September 2010
  • ...tion of pure 'greens' and 'blues', colours difficult to achieve with other fuel systems in fireworks formulae. [[Category:Food additives]]
    18 KB (2,760 words) - 10:11, 20 September 2010
  • ...sed to waterproof [[boat]]s, and even as a coating for buildings with some additives. The Greek historian [[Herodotus]] said hot bitumen was used as mortar in t * [[Bitumen-based fuel]]
    13 KB (1,945 words) - 10:12, 20 September 2010
  • ...ions that are stabilized with egg yolk [[lecithin]] or other types of food additives such as [[Sodium stearoyl lactylate]]. ...his emulsion is achieved by applying an aqueous surfactant solution to the fuel through a high pressure nozzle.
    16 KB (2,286 words) - 10:12, 20 September 2010
  • ...er components in crude oil (such as [[naphtha]], [[gasoline]] and [[Diesel fuel|diesel]]) by the process of [[fractional distillation]], usually under [[va ...emulsions contain up to 70% asphalt and typically less than 1.5% chemical additives. There are two main types of emulsions with different affinity for aggregat
    34 KB (5,036 words) - 21:35, 20 September 2010
  • ...on the choice of reinforcing fibers, the aerogel matrix, and opacification additives included in the composite. ...waste disposal. A prospective use of platinum-on-carbon catalysts is in [[fuel cell]]s.
    26 KB (3,758 words) - 10:14, 20 September 2010
  • ...ch as modacryl or through the application of a coating with fire retardant additives (bromide of phosporus compounds). ...melting processes, roller covers, grinding technology, insulations, seals, fuel cell,
    10 KB (1,349 words) - 10:15, 20 September 2010
  • {{two other uses||the fuel called "paraffin" in [[the UK]] and [[South Africa]]|Kerosene}} ...r ''iso''alkanes are also called ''iso''paraffins. It is distinct from the fuel known in Ireland, Britain and [[South Africa]] as ''paraffin oil'' or just
    13 KB (1,878 words) - 10:17, 20 September 2010
  • ...on]]s, mostly introduced by the action of naturally occurring acids in the fuel and acids generated in [[lubricant]]s by oxidative processes with the metal ...ubricant)|greases]]. It is approved for military and commercial [[aviation fuel]]s. [[Benzotriazole]] and its various derivatives are also common in [[lubr
    1 KB (191 words) - 10:17, 20 September 2010
  • * DCI-4A, widely used in commercial and military [[jet fuel]]s, acts also as a [[lubricity]] additive. Can be also used for [[gasoline] [[Category:Oil additives]]
    7 KB (1,003 words) - 10:17, 20 September 2010
  • ...s were aimed at breaking down visible foam at the surface. [[Kerosene]], [[fuel oil]] and other light oil products were used to break down foam. Other [[ve [[Category:Food additives]]
    11 KB (1,544 words) - 10:18, 20 September 2010
  • ...one]]s, [[fluorocarbon]]s and many others are sometimes used as base oils. Additives deliver reduced friction and wear, increased [[viscosity]], improved viscos ...to a low-sulfur [[Diesel fuel|diesel]]; [[biodiesel]] is a popular diesel fuel additive providing additional lubricity.
    32 KB (4,626 words) - 10:18, 20 September 2010
  • ...nt for construction sites with critical time schedules. The usage of these additives in hot mixed asphalt (above) may afford easier compaction and allow cold we :In addition to the asphalt and aggregate, additives, such as [[polymer]]s, and antistripping agents may be added to improve the
    9 KB (1,283 words) - 10:20, 20 September 2010
  • ...ich involves great deal of heat, it would be not very productive if fossil fuel were used in the production process.
    10 KB (1,311 words) - 10:20, 20 September 2010
  • ===Additives=== ...this gas, of which 50% is from the chemical process, and 40% from burning fuel.<ref>[http://www.wbcsd.org/includes/getTarget.asp?type=d&id=ODY3MA The Ceme
    63 KB (9,167 words) - 10:23, 20 September 2010
  • ...nt [[Calcium oxide|lime]] as binder. The volcanic ash and pulverized brick additives that were added to the burnt lime to obtain a hydraulic binder were later r ...ind the aggregate materials of concrete. Upon the addition of water and/or additives the cement mixture is referred to as concrete, especially if aggregates hav
    30 KB (4,351 words) - 10:23, 20 September 2010

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)