Search results

• Dimercaprol
  ...e affected enzyme's activity<ref>Goldman M, Dacre JC. (1989) Lewisite: its chemistry, toxicology, and biological effects. Rev Environ Contam Toxicol 110: 75-115 ...se in case of cadmium toxicity is to be avoided. It does, however, remove inorganic mercury from the kidneys; but is not useful in the treatment of alkylmercur
  5 KB (644 words) - 20:14, 21 September 2010
• Sodium thiosulfate
  ...]] manufacture.<ref name="holleman">Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001. ISBN 0-12-352651-5</ref> In the laborato In analytical chemistry, the most important use comes from the fact that the thiosulfate anion reac
  12 KB (1,720 words) - 16:42, 27 September 2010
• Potassium iodide
  ...yday "Iodine and Iodine Compounds" in Ullmann's Encyclopedia of Industrial Chemistry, 2005, Wiley-VCH, Weinheim</ref> ===Inorganic chemistry===
  23 KB (3,281 words) - 16:44, 27 September 2010
• Activated carbon
  ...he chemical is typically an [[acid]], strong [[Alkali|base]], or a [[Salt (chemistry)|salt]] ([[phosphoric acid]], [[potassium hydroxide]], [[sodium hydroxide]] Porous carbons containing several types of inorganic impregnant such as [[iodine]], [[silver]], [[cation]]s such as Al, Mn, Zn,
  41 KB (5,738 words) - 16:47, 27 September 2010
• Prussian blue
  ...lleman: [http://books.google.com/books?id=vEwj1WZKThEC&pg=PA1444 Inorganic chemistry], p.1444. Academic Press, 2001; Google books</ref><br /> ...ition Metal Cyanide Compounds: Modern Perspectives", Progress in Inorganic Chemistry, 1997, 45, 283-391.</ref>. Despite being one of the oldest known synthetic
  20 KB (3,004 words) - 16:47, 27 September 2010
• Acetic acid
  ...ell. It is a [[weak acid]], in that it is only a partially [[dissociation (chemistry)|dissociated]] acid in an [[aqueous solution]]. Pure, [[water]]-free acetic ...= Martin|first = Geoffrey|year = 1917|title = Industrial and Manufacturing Chemistry|edition = Part 1, Organic|location = London|publisher = Crosby Lockwood|pag
  41 KB (5,915 words) - 16:49, 27 September 2010
• Magnesium hydroxide
  | RefractIndex = 1.559<ref>Pradyot Patnaik. ''Handbook of Inorganic Chemicals''. McGraw-Hill, 2002, ISBN 0070494398</ref> '''Magnesium hydroxide''' is an inorganic compound with the chemical formula Mg(OH)₂. As a suspension in w
  11 KB (1,555 words) - 16:49, 27 September 2010
• Aluminium hydroxide
  ==Chemistry== ...dral holes between the two layers.<ref>A. F. Wells, ''Structural Inorganic Chemistry'', 4th. edition 1975, Oxford University Press.</ref>
  10 KB (1,283 words) - 16:49, 27 September 2010
• Nitrous oxide
  ...of Newmarket]]. Mentioned for the Nobel Prize for Scientific Attainment in Chemistry. Prof. George Poe, a cousin of the poet Edgar Allan Poe, a noted scientist [[Category:Inorganic nitrogen compounds]]
  61 KB (8,728 words) - 16:50, 27 September 2010
• Mercury (element)
  ...Why is mercury a liquid at STP?| accessdate=May 1, 2007| publisher=General Chemistry Online at Frostburg State University| author=Senese, F}}</ref><ref name="No ...|title=Why is mercury liquid? Or, why do relativistic effects not get into chemistry textbooks?| journal= Journal of Chemical Education|volume=68|page=110 |year
  69 KB (10,077 words) - 21:35, 20 September 2010
• Magnesium sulfate
  ...function of frequency. Lower frequencies are less affected by the [[Salt (chemistry)|salt]], so that the acoustic energy travels much farther in the ocean. [[B .... The hydrated solid is then removed with filtration or decantation. Other inorganic sulfate salts such as [[sodium sulfate]] and [[calcium sulfate]] may also b
  14 KB (1,882 words) - 16:50, 27 September 2010
• EDTA
  ...Acid and Related Chelating Agents" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005.{{DOI|10.1002/14356007.a10_095}}</ref> ...ate base]] that is the [[ligand]], and H₄EDTA, the [[precursor (chemistry)|precursor]] to that ligand. At very low pH (very acidic conditions) the f
  21 KB (2,946 words) - 15:10, 6 July 2010
• Layered double hydroxides
  ...ng anions located in the interlayer region. This is unusual in solid state chemistry: many more famililies of materials have negatively charged layers and catio ...eplaced. A wide variety of anions may be incorporated, ranging from simple inorganic anions (e.g. CO₃^2-) through organic anions (e.g. benz
  8 KB (1,128 words) - 10:07, 20 September 2010
• Iron(II) hydroxide
  | Density = 3.4 g/cm³ <ref>Pradyot Patnaik. ''Handbook of Inorganic Chemicals''. McGraw-Hill, 2002, ISBN 0070494398</ref> ...o elemental [[selenium]], which is insoluble in water and [[precipitation (chemistry)|precipitates]] out.<ref>{{cite journal
  5 KB (720 words) - 10:07, 20 September 2010
• Hydrogen-terminated silicon surface
  ...promising material as a [[compound (chemistry)|compound]] of organic and [[inorganic]] [[Chemical substance|substances]].
  2 KB (231 words) - 10:08, 20 September 2010
• Ceramic materials
  '''Ceramic materials''' are [[inorganic]], [[nonmetal|non-metallic]] materials and things made from them. They may ...e from 1,000 °C to 1,600 °C (1,800 °F to 3,000 °F). Exceptions include inorganic materials that do not have oxygen such as silicon carbide. Glass by definit
  28 KB (3,876 words) - 10:08, 20 September 2010
• Parylene
  Parylene is a green chemistry, which is self-initiated (no initiator needed) and un-terminated (no termin |journal = Journal of Polymer Science: Polymer Chemistry Edition
  8 KB (1,048 words) - 10:09, 20 September 2010
• Biopolymer
  Many polymer researchers believe that polymer chemistry had its origins with the characterization of cellulose. Cellulose was isola ...ammonia. CO₂ can be formed by oxidative reactions which utilize inorganic compounds, such as sulphate and nitrate ions, in the environment as oxidizi
  68 KB (9,959 words) - 10:10, 20 September 2010
• PolyDADMAC
  ...material and reduces [[sludge]] volume compared with [[inorganic compound|inorganic]] coagulants. ...[[humus]]. Little is needed to produce large flocs, rapid [[precipitation (chemistry)|precipitation]] and low [[turbidity]] residue.
  4 KB (452 words) - 10:10, 20 September 2010
• Fire-safe polymers
  ...ombustion]] process begins when heating a [[polymer]] yields [[Volatility (chemistry)|volatile]] products. If these products are sufficiently concentrated, with ...e products, or add chemicals that would remove fire-propagating [[Radical (chemistry)|radicals]] (H and OH), to name a few. These specific chemicals can be adde
  17 KB (2,260 words) - 10:10, 20 September 2010

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)