Glazed architectural terra-cotta

From Self-sufficiency
Revision as of 00:28, 13 July 2010 by Johnbod (Talk) (Adding category Category:Terracotta (using HotCat))

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
File:GoulburnElmsleaChambers 001.jpg
Elmslea Chambers in Goulburn, New South Wales, Australia - built in 1933, it was one of the first buildings in Australia to use coloured polychrome terracotta in its façade which features a fine relief of birds, flowers, leaves and typical Art Deco sunbursts under the windows.
File:1015-capital.jpg
Polychrome glazed capital, circa 1915. Randalls Lost NYC collection
File:Sullivanesque.jpg
White glazed Sullivanesque, circa 1925. Randalls Lost NYC collection

Glazed architectural terra-cotta is a ceramic masonry building material popular in the United States from the late 19th century until the 1930s, and still one of the most common building materials found in U.S. urban environments. It is the glazed version of architectural terra-cotta; the material in both its glazed and unglazed versions is sturdy and relatively inexpensive, and can be molded into richly ornamented detail. Glazed terra-cotta played a significant role in architectural styles such as the Chicago School and Beaux-Arts architecture.

History

The material, also known in Great Britain as faience and sometimes referred to as "architectural ceramics", was closely associated with the work of Cass Gilbert, Louis Sullivan, and Daniel H. Burnham, among other architects. Buildings incorporating glazed terra-cotta include the Woolworth Building in New York City and the Wrigley Building in Chicago.

Glazed architectural terra-cotta offered a modular, varied and relatively inexpensive approach to wall and floor construction. It was particularly adaptable to vigorous and rich ornamental detailing. Terra-cotta is an enriched molded clay brick or block. It was usually hollow cast in blocks which were open to the back, like boxes, with internal compartment-like stiffeners called webbing. Webbing substantially strengthened the load-bearing capacity of the hollow blocks without greatly increasing its weight. The blocks would then be finished with a glaze, with a clay wash or an aqueous solution of metal salts, before firing. Late 19th century advertising for the material promoted the durable, impervious and adaptable nature of glazed architectural terra-cotta. It could accommodate subtle nuances of modeling, texture and color. Compared to stone, it was easier to handle, quickly set and more affordable to use. The cost of molding the clay, glazing and firing the blocks, when compared to carving stone, represented a considerable savings, especially when casts were used in a modular fashion--that is, repeated over and over again. It never needed paint and periodic washings restored its original appearance.

Usage

Variations in the color and pattern of the glaze made it possible for buildings constructed with the material to look like they were finished with granite or limestone; this flexibility was part of the reason the material was so attractive to architects at the time.

In wide use, there were four major types of terra-cotta used[1]

1) Brownstone was the earliest type. A dark red or brown block which was not necessarily glazed. It was used as imitation sandstone, brick or real brownstone and associated with the architectural styles of Richard Upjohn, James Renwick, H. H. Richardson.
2) Fireproof was developed as a direct result of the growth of the high rise building in America. Cheap, light and fireproof, the rough-finished hollow blocks were ideally suited to span the I-beam members in floor, wall and ceiling construction. Certain varieties are still in production today.
3) Veneer was developed during the 1930's and is still used today. Unlike traditional architectural terra-cotta, ceramic veneer is not hollow cast. It is a veneer of glazed ceramic tile which is ribbed the back like bathroom tile and usually attached to a grid of metal ties which have been anchored to the building.
4) Glazed architectural terra-cotta was the most complex building material developed. The hollow units were hand cast in molds or carved in clay and heavily glazed, then fired. This is the terra-cotta associated with the architecture of Cass Gilbert, Louis Sullivan and Daniel H. Burnham.

Use in America

The American Terra Cotta Corporation, founded in 1881[2], operated for eighty-five years in the little town of Terra Cotta in the heart of Illinois dairy country (near Crystal Lake, Illinois), the company fabricated architectural terra cotta for more than 8,000 buildings throughout the U.S. and Canada. It was the last exclusive manufacturer of architectural terra cotta by the time it ceased production in 1966. From its fortuitous founding in time to rebuild the fire-ravished city of Chicago until its closing, it was the major producer of architectural glazed terra cotta on the North American continent.

Guastavino tile was used in many places, including the Bridgemarket under the Manhattan side of the Queensboro Bridge.

Illinois examples

[3] [4] [5]

Use in Canada

Although glazed terra-cotta was much more common in the U.S., it was used in central Canada starting around 1900, on many of the area's first skyscrapers. The glazed terra-cotta used in central Canada was usually imported from the U.S. or England.

Use in Great Britain

From around 1890 the use of unglazed terra-cotta lost ground to the glazed version - faience, and glazed brick - which were comparatively easy to clean and were not blackened by city smoke.

See also

Further reading

Brick - A World History, James W P Campbell & Will Pryce, 2003, ISBN 0-500-34195-8

External links and sources

References

  1. George A. Berry III with Sharon S. Darling (2003). Common Clay - A History of American Terra Cotta Corporation 1881-1966. Crystal Lake, Illinois: TCR Corp. ISBN ISBN 0-9747738-0-8 Check |isbn= value: invalid character (help). 
  2. Sun Times Staff writers. George A. Berry III Obituary. Sun Times Newspaper. 2010-04-24. URL:http://legacy.suntimes.com/obituaries/chicagosuntimes/obituary.aspx?n=george-a-berry&pid=142023500. Accessed: 2010-04-24. (Archived by WebCite at http://www.webcitation.org/5pELtWAnc)
  3. http://webapps.cityofchicago.org/landmarksearchWeb/pageflow/landmarkdetail.do
  4. * Schmitt, Ronald A. (2002). Sullivanesque: URBAN ARCHITECTURE AND ORNAMENTATION. Champaign: University of Illinois Press. pp. 238, 239, 240. ISBN ISBN 978-0252027260 Check |isbn= value: invalid character (help). 
  5. * [1] City Council Minutes, Evanston, IL. August 16, 2004