Ship gun fire-control systems
The examples and perspective in this article may not represent a worldwide view of the subject. Please improve this article and discuss the issue on the talk page. |
Ship gun fire-control systems (GFCS) enable remote and automatic targeting of guns against ships, aircraft, and shore targets, with or without the aid of radar or optical sighting. Most US ships destroyers or larger (but not destroyer escorts or escort carriers) employed GFCS for 5 inch and larger guns, up to battleships such as the USS Iowa. After the 1950s, GCFSs were integrated with missile fire-control systems and other ship sensors.
The major components of a GFCS are a manned director, with or replaced by radar or television camera, a computer, stabilizing device or gyro, and equipment in a plotting room[1]
For the US, the brains were first provided by the Mark 1A Fire Control Computer which was an electro-mechanical analog ballistic computer that provided quick and accurate near real-time firing solutions which could automatically control one or more gun mounts against stationary, or moving targets on the surface or in the air. This gave American forces a technological advantage in WWII against the Japanese who did not develop this technology, and still used visual correction of shots with colored splashes. Digital computers would not be adopted for this purpose by the US until the mid 1970s. However, it must be emphasized that all analogue AA fire control systems had severe limitations, and even the USN Mk 37 required nearly 1000 rounds of 5" mechanical fuze ammunition per kill, even in late 1944.[2]
The MK 37 was the first of a series of evolutionary improvements in gun fire control systems.
Contents
- 1 History
- 2 British Royal Navy systems
- 3 US Navy Systems
- 3.1 MK 33 Gun Fire Control System (GFCS)
- 3.2 MK 37 Gun Fire Control System (GFCS)
- 3.3 MK 38 Gun Fire Control System
- 3.4 MK 51 Fire Control System
- 3.5 MK 56 Gun Fire Control System (GFCS)
- 3.6 MK 68 Gun Fire Control System (GFCS)
- 3.7 MK 86 Gun Fire Control System (GFCS)
- 3.8 MK 34 Gun Weapon System (GWS)
- 3.9 MK 92 Fire Control System (FCS)
- 3.10 Mk 110 57 mm gun
- 4 See also
- 5 Notes
- 6 Bibliography
- 7 External links
History
Naval fire control is more complex than for single ground-based gun because of the need to control the firing of several guns at once. In naval engagements both the firing guns and target are moving, and the variables are compounded by the greater distances and times involved. Furthermore, a ship rolls and pitches, making gyroscopic stabilization extremely desirable. Naval gun fire control potentially involves three levels of complexity:
- Local control originated with primitive gun installations aimed by the individual gun crews.
- The director system of fire control was pioneered by British Royal Navy in 1912. All guns on a single ship were laid from a central position placed above the bridge as high as possible. The director became a design feature of battleships, with Japanese pagoda-style masts designed to maximize the view of the director over long ranges. A fire control officer who ranged the salvos transmitted elevations and angles to individual guns.
- Coordinated gunfire from a formation of ships at a single target was a focus of battleship fleet operations. An officer on the flagship would signal target information to other ships in the formation.
Corrections can be made for surface wind velocity, firing ship roll and pitch, powder magazine temperature, drift of rifled projectiles, individual gun bore diameter adjusted for shot-to-shot enlargement, and rate of change of range with additional modifications to the firing solution based upon the observation of preceding shots. More sophisticated fire control systems consider more of these factors rather than relying on simple correction of observed fall of shot. Differently colored dye markers were sometimes included with large shells so individual guns, or individual ships in formation, could distinguish their shell splashes during daylight.
Rudimentary naval fire control systems were first developed around the time of World War I. [3] Local control had been used up until that time, and remained in use on smaller warships and auxiliaries through World War II. It may still be used for machineguns aboard patrol craft.
For the UK, their first system was built before the Great War. At the heart was an analogue computer designed by Commander (later Admiral Sir) Frederic Charles Dreyer that calculated rate of change of range. The Dreyer Table was to be improved and served into the interwar period at which point it was superseded in new and reconstructed ships by the Admiralty Fire Control Table.[4]
The use of Director controlled firing together with the fire control computer moved the control of the gun laying from the individual turrets to a central position, although individual gun mounts and multi-gun turrets may retain a local control option for use when battle damage limits Director information transfer. Guns could then be fired in planned salvos, with each gun giving a slightly different trajectory. Dispersion of shot caused by differences in individual guns, individual projectiles, powder ignition sequences, and transient distortion of ship structure was undesirably large at typical naval engagement ranges. Directors high on the superstructure had a better view of the enemy than a turret mounted sight, and the crew operating it were distant from the sound and shock of the guns.
Unmeasured and uncontrollable ballistic factors like high altitude temperature, humidity, barometric pressure, wind direction and velocity required final adjustment through observation of fall of shot. Visual range measurement (of both target and shell splashes) was difficult prior to availability of RADAR. The British favoured coincident rangefinders while the Germans and the U.S. Navy, stereoscopic type. The former were less able to range on an indistinct target but easier on the operator over a long period of use, the latter the reverse.
In a typical WWII British ship the fire control system connected the individual gun turrets to the director tower (where the sighting instruments were) and the analogue computer in the heart of the ship. In the director tower, operators trained their telescopes on the target; one telescope measured elevation and the other bearing. Rangefinder telescopes on a separate mounting measured the distance to the target. These measurements were converted by the Fire Control Table into bearings and elevations for the guns to fire on. In the turrets, the gunlayers adjusted the elevation of their guns to match an indicator which was the elevation transmitted from the Fire Control table - a turret layer did the same for bearing. When the guns were on target they were centrally fired.[5]
During the Battle of Jutland, while the British were thought by some to have the finest fire control system in the world at that time, only 3% of their shots actually struck their targets. At that time, the British primarily used a manual fire control system. The one British ship in the battle that had a mechanical fire control system turned in the best shooting results.[6] This experience contributed to computing rangekeepers becoming standard issue.[7]
The US Navy's first deployment of a rangekeeper was on the USS Texas in 1916. Because of the limitations of the technology at that time, the initial rangekeepers were crude. For example, during World War I the rangekeepers would generate the necessary angles automatically but sailors had to manually follow the directions of the rangekeepers. This task was called "pointer following" but the crews tended to make inadvertent errors when they became fatigued during extended battles.[8] During World War II, servomechanisms (called "power drives" in the U.S. Navy) were developed that allowed the guns to automatically steer to the rangekeeper's commands with no manual intervention, though pointers still worked even if automatic control was lost. The Mk. 1 and Mk. 1A computers contained approximately 20 servomechanisms, mostly position servos, to minimize torque load on the computing mechanisms.[9]
During their long service life, rangekeepers were updated often as technology advanced and by World War II they were a critical part of an integrated fire control system. The incorporation of radar into the fire control system early in World War II provided ships with the ability to conduct effective gunfire operations at long range in poor weather and at night.[10]
The Aichi Clock Company first produced the Type 92 Shagekiban Low Angle analog computer in 1932. The USN Rangekeeper and the Mark 38 GFCS had an edge over Imperial Japanese Navy systems in operability and flexibility. The US system allowing the plotting room team to quickly identify target motion changes and apply appropriate corrections. The newer Japanese systems such as the Type 98 Hoiban and Shagekiban on the Yamato-class were more up to date, which eliminated the Sokutekiban, but it still relied on 7 operators. In contrast to US radar aided system, the Japanese relied on averaging optical rangefinders, lacked gyros to sense the horizon, and required manual handling of follow-ups on the Sokutekiban, Shagekiban, Hoiban as well as guns themselves.
This could have played a role in Center Force’s battleships dismal performance in the Battle off Samar in October 1944.[11] In that action, destroyers pitted against the world's largest armored battleships and cruisers dodged shells to within torpedo firing range, while lobbing hundreds of accurate automatically-aimed 5 inch rounds on target. Cruisers did not land hits on splash-chasing escort carriers until after an hour of pursuit to close within 5 miles. Although the Japanese pursued a doctrine of achieving superiority at long gun ranges, one cruiser fell victim to secondary explosions caused by hits from within the range of carrier-based single "peashooter" 5 in guns. Eventually with the aid of hundreds of carrier based aircraft, a battered center force was turned back just before it could have finished off survivors of the lightly armed task force of screening escorts and escort carriers of Taffy 3. The Battle of the Surigao Strait also established the clear superiority of US radar-assisted systems at night.
The rangekeeper's target position prediction characteristics could be used to defeat the rangekeeper. For example, many captains under long range gun attack would make violent maneuvers to "chase salvos." A ship that is chasing salvos is maneuvering to the position of the last salvo splashes. Because the rangekeepers are constantly predicting new positions for the target, it is unlikely that subsequent salvos will strike the position of the previous salvo.[12] Practical rangekeepers had to assume that targets were moving in a straight-line path at a constant speed, to keep complexity to acceptable limits. A sonar rangekeeper was built to include a target circling at a constant radius of turn, but that function had been disabled.
Only the RN[13] and USN achieved 'blindfire' radar fire-control, with no need to visually acquire the opposing vessel. The Axis powers all lacked this capability. Classes such as Iowa and South Dakota could lob shells over visual horizon, in darkness, through smoke or weather. American systems, in common with many contemporary major navies, had Gyroscopic stable vertical elements, so they could keep a solution on a target even during maneuvers. By the start of World War Two British, German and American warships could both shoot and maneuver using sophisticated analog fire-control computers that incorporated Gyro compass and Gyro Level inputs.[14]
The last combat action for the analog rangekeepers, at least for the US Navy, was in the 1991 Persian Gulf War[15] when the rangekeepers on the Iowa-class battleships directed their last rounds in combat.
- Dreyer Table
- Pollen's Argo Clock
- Admiralty Fire Control Table - from 1920s
- HACS - A/A system from 1931
- Fuze Keeping Clock - simplified HACS A/A system for destroyers from 1938
- Pom-Pom Director - pioneered use of gyroscopic Tachymetric fire-control for short range weapons - From 1940
- Gyro Rate Unit - pioneered use of gyroscopic Tachymetric fire-control for medium calibre weapons - From 1940
- Royal Navy Radar - pioneered the use of radar for A/A fire-control and centimetric radar for surface fire-control - from 1939
MK 33 Gun Fire Control System (GFCS)
The Mk 33 GFCS was a power-driven fire control director, less advanced than the MK 37. The Mark 33 GFCS used a Mk 10 Rangekeeper, analog fire-control computer. The entire rangekeeper was mounted in an open director rather than in a separate plotting room as in the RN HACS, or the later Mk 37 GFCS, and this made it difficult to upgrade the Mk 33 GFCS.[16] It could compute firing solutions for targets moving at up to 320 knots, or 400 knots in a dive. Its installations started in the late 1930s on destroyers, cruisers and aircraft carriers with two Mk 33 directors mounted fore and aft of the island. They had no fire-control radar initially, and were aimed only by sight. After 1942, some of these directors were enclosed and had a Mk 4 fire-control radar added to the roof of the director, while others had a Mk 4 radar added over the open director. With the Mk 4 large aircraft at up to 40,000 yards could be targeted. It had less range against low-flying aircraft, and large surface ships had to be within 30,000 yards. With radar, targets could be seen and hit accurately at night, and through weather.[17] The Mark 33 and 37 systems used tachymetric target motion prediction.[18]
MK 37 Gun Fire Control System (GFCS)
Development of the Sperry Mk 1 computer was begun in 1932 as part of the Mk 37 fire control system for the 5"/38 DP mount. The Royal Navy had conducted sea trials of their initial version of the High Angle Control System for AA fire, about two years earlier, in January 1930. The computer was completed as the Ford Mk 1 computer by 1935. Rate information for height changes enabled complete solution for aircraft targets moving over 400 mph. Destroyers starting with the Sims-class employed one of these computers, battleships up to four. The system's effectiveness against aircraft diminished as planes became faster, but toward the end of World War II upgrades were made to the Mk37 System, and it was made compatible with the development of the VT (Variable Time) proximity fuze which exploded when it was near a target, rather than by timer or altitude, greatly increasing the probability that any one shell would destroy a target.
Mark 37 Director
The function of the Mark 37 Director, which resembles a turret with "ears" rather than guns, was to track the present position of the target in bearing, elevation, and range. To do this, it had optical sights (the rectangular windows or hatches on the front), an optical rangefinder (the tubes or ears sticking out each side), and later models, fire control radar antennas. The rectangular antenna is for the Mark 12 FC radar, and the parabolic antenna on the left ("orange peel") is for the Mk 22 FC radar. They were part of an upgrade to improve tracking of aircraft.[1]
The Director Officer also had a slew sight used to quickly point the director towards a new target.[19] Up to four Mark 37 Gun Fire Control Systems were installed on battleships. On a battleship, the director is protected by 1.5 inches of armor, and weighs 21 tons. The Mark 37 director aboard the USS Joseph P. Kennedy, Jr. is protected with one-half inch of armor plate and weighs 16 tons.[20]
Stabilizing signals from the Stable Element kept the optical sight telescopes, rangefinder, and radar antenna free from the effects of deck tilt. The signal that kept the rangefinder's axis horizontal was called "crosslevel"; elevation stabilization was called simply "level". Although the stable element was below decks in Plot, next to the Mk.1/1A computer, its internal gimbals followed director motion in bearing and elevation so that it provided level and crosslevel data directly. To do so, accurately, when the fire control system was initially installed, a surveyor, working in several stages, transferred the position of the gun director into Plot so the stable element's own internal mechanism was properly aligned to the director.
Although the rangefinder had significant mass and inertia, the crosslevel servo normally was only lightly loaded, because the rangefinder's own inertia kept it essentially horizontal; the servo's task was usually simply to ensure that the rangefinder and sight telescopes remained horizontal.
Mk. 37 director train (bearing) and elevation drives were by D.C. motors fed from Amplidyne rotary power-amplifying generators. Although the train Amplidyne was rated at several kilowatts maximum output, its input signal came from a pair of 6L6 audio beam tetrode vacuum tubes (valves, in the U.K.).
Plotting room
In battleships, the Secondary Battery Plotting Rooms were down below the waterline and inside the armor belt. They contained four complete sets of the fire control equipment needed to aim and shoot at four targets. Each set included a Mark 1A computer, a Mark 6 Stable Element, FC radar controls and displays, parallax correctors, a switchboard, and people to operate it all.
(In the early 20th century, successive range and/or bearing readings were probably plotted either by hand or by the fire control devices (or both). Humans were very good data filters, able to plot a useful trend line given somewhat-inconsistent readings. As well, the Mark 8 Rangekeeper included a plotter. The distinctive name for the fire-control equipment room took root, and persisted even when there were no plotters.)
Ford Mark 1A Fire Control Computer
The Mark 1A Fire Control Computer was an electro-mechanical analog ballistic computer. Originally designated the Mark 1, design modifications were extensive enough to change it to "Mk. 1A". The Mark 1A appeared post WW2 and may have incorporated technology developed for the Bell Labs Mark 8, Fire Control Computer[21]. Sailors would stand around a box 62 inches long, 38 inches wide, and 45 inches high. Even though built with extensive use of an aluminum alloy framework (including thick internal mechanism support plates) and computing mechanisms mostly made of aluminum alloy, it weighed as much as a car, about 3125 lb, with the Star Shell Computer Mark 1 adding another 215 lb. It used 115 volts AC, 60 Hz, single phase, and typically a few amperes or even less. Under worst-case fault conditions, its synchros apparently could draw as much as 140 amperes, or 15,000 watts (about the same as 3 houses while using ovens). Unfortunately, that figure has remained in current references without explanatory qualification. (For a computer that size to dissipate 15 kW with no cooling provisions is absurd.) Almost all of the computer's inputs and outputs were by synchro torque transmitters and receivers.
Its function was to automatically aim the guns so that a fired projectile would collide with the target.[1] This is the same function as the main battery’s Mk 8 Rangekeeper above except that some of the targets the Mark 1A had to deal with also moved in elevation — and much faster. For a surface target, the Secondary Battery’s Fire Control problem is the same as the Main Battery’s with the same type inputs and outputs. The major difference between the two computers is their ballistics calculations. The amount of gun elevation needed to project a 5-in shell nine nautical miles (17 km) is very different from the elevation needed to project a 16-in shell the same distance.
In operation, this computer received target range, bearing, and elevation from the gun director. As long as the director was on target, clutches in the computer were closed, and movement of the gun director (along with changes in range) made the computer converge its internal values of target motion to values matching those of the target. While converging, the computer fed aided-tracking ("generated") range, bearing, and elevation to the gun director. If the target remained on a straight-line course at a constant speed (and in the case of aircraft, constant rate of change of altitude ("rate of climb"), the predictions became accurate and, with further computation, gave correct values for the gun lead angles and fuze setting.
Concisely, the target's movement was a vector, and if that didn't change, the generated range, bearing, and elevation were accurate for up to 30 seconds. Once the target's motion vector became stable, the computer operators told the gun director officer ("Solution Plot!"), who usually gave the command to commence firing. Unfortunately, this process of inferring the target motion vector required a few seconds, typically, which might take too long.
The process of determining the target's motion vector was done primarily with an accurate constant-speed motor, disk-ball-roller integrators, nonlinear cams, mechanical resolvers, and differentials. Four special coordinate converters, each with a mechanism in part like that of a traditional computer mouse, converted the received corrections into target motion vector values. The Mk. 1 computer attempted to do the coordinate conversion (in part) with a rectangular-to polar converter, but that didn't work as well as desired (sometimes trying to make target speed negative!). Part of the design changes that defined the Mk. 1A were a re-thinking of how to best use these special coordinate converters; the coordinate converter ("vector solver") was eliminated.
The Stable Element, which in contemporary terminology would be called a vertical gyro, stabilized the sights in the director, and provided data to compute stabilizing corrections to the gun orders. Gun lead angles meant that gun-stabilizing commands differed from those needed to keep the director's sights stable. Ideal computation of gun stabilizing angles required an impractical number of terms in the mathematical expression, so the computation was approximate.
To compute lead angles and time fuze setting, the target motion vector's components as well as its range and altitude, wind direction and speed, and own ship's motion combined to predict the target's location when the shell reached it. This computation was done primarily with mechanical resolvers ("component solvers"), multipliers, and differentials, but also with one of four three-dimensional cams.
Based on the predictions, the other three of the three-dimensional cams provided data on ballistics of the gun and ammunition that the computer was designed for; it could not be used for a different size or type of gun except by rebuilding that could take weeks.
Servos in the computer boosted torque accurately to minimize loading on the outputs of computing mechanisms, thereby reducing errors, and also positioned the large synchros that transmitted gun orders (bearing and elevation, sight lead angles, and time fuze setting).These were electromechanical "bang-bang", yet had excellent performance.
The anti-aircraft fire control problem was more complicated because it had the additional requirement of tracking the target in elevation and making target predictions in three dimensions. The outputs of the Mk 1A were the same (gun bearing and elevation), except fuze time was added. The fuze time was needed because the ideal of directly hitting the fast moving aircraft with the projectile was impractical. With fuze time set into the shell, it was hoped that it would explode near enough to the target to destroy it with the shock wave and shrapnel. Towards the end of World War II, the invention of the VT proximity fuze eliminated the need to use the fuze time calculation and its possible error. This greatly increased the odds of destroying an air target. Digital fire control computers were not introduced into service until the mid 1970s.
Central aiming from a gun director hasa minor complication in that the guns are often far enough away from the director to require parallax correction so they aim correctly. In the Mk. 37 GFCS, the Mk1 / 1A sent parallax data to all gun mounts; each mount had its own scale factor (and "polarity") set inside the train (bearing) power drive (servo) receiver-regulator (controller).
Twice in its history, internal scale factors were changed, presumably by changing gear ratios. Target speed had a hard upper limit, set by a mechanical stop. It was originally 300 knots, and subsequently doubled in each rebuild.
These computers were built by Ford Instrument Company, Long Island City, Queens, New York. The company was named after Hannibal C. Ford, a genius designer, and principal in the company. Special machine tools machined face cam grooves and accurately duplicated 3-D ballistic cams.
Generally speaking, these computers were very well designed and built, very rugged, and almost trouble-free, frequent tests included entering values via the handcranks and reading results on the dials, with the time motor stopped. These were static tests. Dynamic tests were done similarly, but used gentle manual acceleration of the "time line" (integrators) to prevent possible slippage errors when the time motor was switched on; the time motor was switched off before the run was complete, and the computer was allowed to coast down. Easy manual cranking of the time line brought the dynamic test to its desired end point, when dials were read.
As was typical of such computers, flipping a lever on the handcrank's support casting enabled automatic reception of data and disengaged the handcrank gear. Flipped the other way, the gear engaged, and power was cut to the receiver's servo motor.
The mechanisms (including servos) in this computer are described superbly, with many excellent illustrations, in the Navy publication OP 1140.
There are photographs of the computer's interior in the National Archives; some are on Web pages, and some of those have been rotated a quarter turn.
Stable Element
The function of the Mk 6 Stable Element (pictured) in this fire control system is the same as the function of the Mk 41 Stable Vertical in the main battery system. It is a vertical seeking gyroscope ("vertical gyro", in today's terms) that supplies the system with a stable up direction on a rolling and pitching ship. In surface mode, it replaces the director’s elevation signal.[1] It also has the surface mode firing keys.
It is based on a gyroscope that erects so its spin axis is vertical. The housing for the gyro rotor rotates at a low speed, on the order of 18 rpm. On opposite sides of the housing are two small tanks, partially filled with mercury, and connected by a capillary tube. Mercury flows to the lower tank, but slowly (several seconds) because of the tube's restriction. If the gyro's spin axis is not vertical, the added weight in the lower tank would pull the housing over if it were not for the gyro and the housing's rotation. That rotational speed and rate of mercury flow combine to put the heavier tank in the best position to make the gyro precess toward the vertical.
When the ship changes course rapidly at speed, the acceleration due to the turn can be enough to confuse the gyro and make it deviate from true vertical. In such cases, the ship's gyrocompass sends a disabling signal that closes a solenoid valve to block mercury flow between the tanks. The gyro's drift is low enough not to matter for short periods of time; when the ship resumes more typical cruising, the erecting system corrects for any error.
The Earth's rotation is fast enough to need correcting. A small adjustable weight on a threaded rod, and a latitude scale makes the gyro precess at the Earth's equivalent angular rate at the given latitude. The weight, its scale, and frame are mounted on the shaft of a synchro torque receiver fed with ship's course data from the gyro compass, and compensated by a differential synchro driven by the housing-rotator motor. The little compensator in operation is geographically oriented, so the support rod for the weight points east and west.
At the top of the gyro assembly, above the compensator, right on center, is an exciter coil fed with low-voltage AC. Above that is a shallow black-painted wooden bowl, inverted. Inlaid in its surface, in grooves, are two coils essentially like two figure 8s, but shaped more like a letter D and its mirror image, forming a circle with a diametral crossover. One coil is displaced by 90 degrees. If the bowl (called an "umbrella") is not centered above the exciter coil, either or both coils have an output that represents the offset. This voltage is phase-detected and amplified to drive two DC servo motors to position the umbrella in line with the coil.
The umbrella support gimbals rotate in bearing with the gun director, and the servo motors generate level and crosslevel stabilizing signals. The Mk. 1A's director bearing receiver servo drives the pickoff gimbal frame in the stable element through a shaft between the two devices, and the Stable Element's level and crosslevel servos feed those signals back to the computer via two more shafts.
(The sonar fire-control computer aboard some destroyers of the late 1950s required roll and pitch signals for stabilizing, so a coordinate converter containing synchros, resolvers, and servos calculated the latter from gun director bearing, level, and crosslevel.)
Fire Control Radar
The fire-control radar used on the Mk 37 GFCS has evolved. In the 1930’s, the Mk 33 Director did not have a radar antenna. The Tizard Mission to the USA provided the USN with crucial data on UK and Royal Navy radar technology and fire-control radar systems. In September 1941, the first rectangular Mk 4 Fire-control radar antenna was mounted on a Mk 37 Director,[22] and became a common feature on USN Directors by mid 1942. Soon aircraft flew faster, and in c1944 to increase speed and accuracy the Mk 4 was replaced by a combination of the Mk 12 (rectangular antenna) and Mk 22 (parabolic antenna) "orange peel" radars. (pictured)[19] in the late 1950s, Mk. 37 directors had Western Electric Mk. 25 X-band conical-scan radars with round, perforated dishes. Finally, the circular SPG 25 antenna was mounted on top.
MK 38 Gun Fire Control System
The Mk38 Gun Fire Control System (GFCS) controlled the large main battery guns of Iowa class battleships. The radar systems used by the Mk 38 GFCS were far more advanced than the primitive radar sets used by the Japanese in World War II. The major components were the director, plotting room, and interconnecting data transmission equipment. The two systems, forward and aft, were complete and independent. Their plotting rooms were isolated to protect against battle damage propagating from one to the other.
Director
The forward Mk38 Director (pictured) was situated on top of the fire control tower. The director was equipped with optical sights, optical Mark 48 Rangefinder (the long thin boxes sticking out each side), and a Mark 13 Fire Control Radar antenna (the rectangular shape sitting on top).[1][23] The purpose of the director was to track the target's present bearing and range. This could be done optically with the men inside using the sights and Rangefinder, or electronically with the radar. (The fire control radar was the preferred method.) The present position of the target was called the Line-Of-Sight (LOS), and it was continuously sent down to the plotting room by synchro motors. When not using the radar's display to determine Spots, the director was the optical spotting station.[1]
Plotting Room
The Forward Main Battery Plotting Room was located below the waterline and inside the armored belt.[1] It housed the forward system's Mark 8 Rangekeeper, Mark 41 Stable Vertical, Mk13 FC Radar controls and displays, Parallax Correctors, Fire Control Switchboard, battle telephone switchboard, battery status indicators, assistant Gunnery Officers, and Fire Control Technicians (FT's).[1][23]
The Mk8 Rangekeeper was an electromechanical analog computer[1][23] whose function was to continuously calculate the gun's bearing and elevation, Line-Of-Fire (LOF), to hit a future position of the target. It did this by automatically receiving information from the director (LOS), the FC Radar (range), the ship's gyrocompass (true ship's course), the ships Pitometer log (ship's speed), the Stable Vertical (ship's deck tilt, sensed as level and crosslevel), and the ship's anemometer (relative wind speed and direction). Also, before the surface action started, the FT's made manual inputs for the average initial velocity of the projectiles fired out of the battery's gun barrels, and air density. With all this information, the rangekeeper calculated the relative motion between its ship and the target.[1] It then could calculate an offset angle and change of range between the target's present position (LOS) and future position at the end of the projectile's time of flight. To this bearing and range offset, it added corrections for gravity, wind, Magnus Effect of the spinning projectile, stabilizing signals originating in the Stable Vertical, Earth's curvature, and Coriolis effect. The result was the turret's bearing and elevation orders (LOF).[1] During the surface action, range and deflection Spots and target altitude (not zero during Gun Fire Support) were manually entered.
The Mk 41 Stable Vertical was a vertical seeking gyroscope, and its function was to tell the rest of the system which-way-is-up on a rolling and pitching ship. It also held the battery's firing keys.[1]
The Mk 13 FC Radar supplied present target range, and it showed the fall of shot around the target so the Gunnery Officer could correct the system's aim with range and deflection spots put into the rangekeeper.[1] It could also automatically track the target by controlling the director's bearing power drive.[1] Because of radar, Fire Control systems are able to track and fire at targets at a greater range and with increased accuracy during the day, night, or inclement weather. This was demonstrated in November 1942 when the battleship USS Washington engaged the Imperial Japanese Navy battlecruiser Kirishima at a range of 18,500 yards (16,900 m) at night.[24] The engagement left Kirishima in flames, and she was ultimately scuttled by her crew.[25] This gave the United States Navy a major advantage in World War II, as the Japanese did not develop radar or automated fire control to the level of the US Navy and were at a significant disadvantage.[24]
The parallax correctors are needed because the turrets are located hundreds of feet from the director. There is one for each turret, and each has the turret and director distance manually set in. They automatically received relative target bearing (bearing from own ship's bow), and target range. They corrected the bearing order for each turret so that all rounds fired in a salvo converged on the same point.
The fire control switchboard configured the battery.[1] With it, the Gunnery Officer could mix and match the three turrets to the two GFCSs. He could have the turrets all controlled by the forward system, all controlled by the aft system, or split the battery to shoot at two targets.
The assistant Gunnery Officers and Fire Control Technicians operated the equipment, talked to the turrets and ship's command by sound-powered telephone, and watched the Rangekeeper's dials and system status indicators for problems. If a problem arose, they could correct the problem, or reconfigure the system to mitigate its effect.
MK 51 Fire Control System
The Bofors 40 mm anti-aircraft guns were arguably the best light anti-aircraft weapon of World War II.,[26] employed on almost every major warship in the U.S. and UK fleet during World War II from about 1943 to 1945.[26] They were most effective on ships as large as destroyer escorts or larger when coupled with electric-hydraulic drives for greater speed and the Mark 51 Director (pictured) for improved accuracy, the Bofors 40 mm gun became a fearsome adversary, accounting for roughly half of all Japanese aircraft shot down between 1 October 1944 and 1 February 1945.[26] along with radar directed fire from 5 inch guns.
MK 56 Gun Fire Control System (GFCS)
This GFCS was designed toward the end of World War II, apparently in response to Japanese kamikaze aircraft attacks. It was conceived by Ivan Getting, mentioned near the end of his Oral history, and its linkage computer was designed by Antonín Svoboda. Its gun director was not shaped like a box, and it had no optical rangefinder. It was manned by one officer, and had sliprings, permitting continuous rotation. (The Mk. 37 gun director had a cable connection to the hull, and occasionally had to be "unwound".) Fig. 26E8 on this Web page shows the director in considerable detail. The explanatory drawings of the system show how it works, but are wildly different in physical appearance from the actual internal mechanisms, perhaps intentionally so. However, it omits any significant description of the mechanism of the linkage computer.That chapter is an excellent detailed reference that explains much of the system's design, which is quite ingenious and forward-thinking in several respects.
In the 1968 upgrade to the USS New Jersey for service off Vietnam, three Mark 56 Gun Fire Control Systems were installed. Two on either side just forward of the aft stack, and one between the aft mast and the aft Mk 38 Director tower.[27] This increased New Jersey's anti-aircraft capability, because the Mk 56 system could track and shoot at faster planes.
MK 68 Gun Fire Control System (GFCS)
Introduced in the early 1950s, the MK 68 was an upgrade from the MK 37 effective against air and surface targets. It combined a manned topside director, a conical scan acquisition and tracking radar, an analog computer to compute ballistics solutions, and a gyro stabilization unit. The gun director was mounted in a large yoke, and the whole director was stabilized in crosslevel (the yoke's pivot axis). That axis was in a vertical plane that included the line of sight.
At least in 1958, the computer was the Mk. 47, an hybrid electronic/electromechanical system. Somewhat akin to the Mk. 1A, it had electrical high-precision resolvers instead of the mechanical one of earlier machines, and multiplied with precision linear potentiometers. However, it still had disc/roller integrators as well as shafting to interconnect the mechanical elements. Whereas access to much of the Mk. 1A required time-consuming and careful disassembly (think days in some instances, and possibly a week to gain access to deeply buried mechanisms), the Mark 47 was built on thick support plates mounted behind the front panels on slides that permitted its six major sections to be pulled out of its housing for easy access to any of its parts. (The sections, when pulled out, moved fore and aft; they were heavy, not counterbalanced. Typically, a ship rolls through a much larger angle than it pitches.) The Mk. 47 probably had 3-D cams for ballistics, but information on it appears very difficult to obtain.
Mechanical connections between major sections were via shafts in the extreme rear, with couplings permitting disconnection without any attention, and probably relief springs to aid re-engagement. One might think that rotating an output shaft by hand in a pulled-out section would misalign the computer, but the type of data transmission of all such shafts did not represent magnitude; only the incremental rotation of such shafts conveyed data, and it was summed by differentials at the receiving end. One such kind of quantity is the output from the roller of a mechanical integrator; the position of the roller at any given time is immaterial; it is only the incrementing and decrementing that counts.
Whereas the Mk. 1/1A computations for the stabilizing component of gun orders had to be approximations, they were theoretically exact in the Mk. 47 computer, computed by an electrical resolver chain.
The design of the computer was based on a re-thinking of the fire control problem; it was regarded quite differently.
Production of this system lasted for over 25 years. A digital upgrade was available from 1975 to 1985, and it was in service into the 2000s. The digital upgrade was evolved for use in the Arleigh Burke-class of destroyers.[28]
Template:Infobox Radar The AN/SPG-53 was a United States Navy gun fire-control radar used in conjunction with the Mark 68 gun fire-control system. It was used with the 5"/54 caliber Mark 42 gun system aboard Belknap-class cruisers, Mitscher-class destroyers, Forrest Sherman-class destroyers, Farragut-class destroyers, Charles F. Adams-class destroyers, Knox-class frigates as well as others.
MK 86 Gun Fire Control System (GFCS)
The US Navy desired a digital gun fire-control system in 1961 for more accurate shore bombardment. Lockheed Electronics produced a prototype with AN/SPQ-9 radar fire control in 1965. An air defense requirement delayed production with the AN/SPG-60 until 1971. The Mk 86 did not enter service until when the nuclear powered missile cruiser was commissioned in February 1974, and subsequently installed on US cruisers and amphibious assault ships. The last US ship to receive the system, USS Port Royal was commissioned in July 1994.[29]
The Mk 86 on Aegis-class ships controls the ship's 5"/54 caliber Mk 45 gun mounts, and can engage up to two targets at a time. It also uses a Remote Optical Sighting system which uses a TV camera with a telephoto zoom lens mounted on the mast and each of the illuminating radars.
MK 34 Gun Weapon System (GWS)
The MK 34 Gun Weapon System is an integral part of the Aegis combat weapon system on Arleigh Burke-class guided missile destroyers, the only operational class of destroyers in the US. It combines the MK 45 5"/54 Caliber Gun Mount, MK 46 MOD 0 Optical Sight System and the MK 160 Mod 4 Gunfire Control System / Gun Computer System. It can be used against surface ship and close hostile aircraft, and as Naval Gunfire Support (NGFS) against shore targets.[30]
MK 92 Fire Control System (FCS)
The Mark 92 fire control system, an Americanized version of the WM-25 system designed in The Netherlands, was approved for service use in 1975. It is deployed onboard the relatively small and austere Oliver Hazard Perry-class frigates to control the MK 75 Naval Gun and the MK 13 Guided Missile Launching System (missiles have since been removed since retirement of its version of the Standard missile). The Mod 1 system used in PHMs (retired) and the US Coast Guard's WMEC and WHEC ships can track one air or surface target using the monopulse tracker and two surface or shore targets. FFG 7 class frigates with the Mod 2 system can track an additional air or surface target using the Separate Track Illuminating Radar (STIR).[31]
Mk 110 57 mm gun
The Mk 110 57 mm gun is the newest multi-purpose, medium caliber gun. It's based on the Bofors 57 Mk 3. Compared to WWII destroyers or escorts fitted with 2 or 5 five-inch guns which could fire 15 rounds per minute per barrel, the single Mk 110 can fire salvos at up to 220 rounds per minute, up to a similar range of nine miles with minimal manpower in a turret with a stealthy radar signature. Linked to a digital fire control system, servo-controlled electro hydraulic gun laying subsystems provide extreme pointing accuracy, even in heavy seas. Current and proposed mountings for the weapon include the United States Coast Guard's National Security Cutter, the upcoming Zumwalt-class destroyer (close-in), and the new Littoral combat ships. [32]
To increase lethality and flexibility, the ammunition comes equipped with a smart programmable fuze with six modes: contact, delay, time, and 3 proximity modes.
See also
- Director (military)
- Fire-control system Ground, sea and air based systems
- HACS - British A/A gun control system
- Mathematical discussion of rangekeeping
- Rangekeeper shipboard analog fire control computer
Notes
Cite error: Invalid <references> tag;
parameter "group" is allowed only.
<references />, or <references group="..." />Bibliography
- Campbell, John (1985). Naval Weapons of World War Two. Naval Institute Press. ISBN 0-87021-459-4.
- Fairfield, A.P. (1921). Naval Ordnance. The Lord Baltimore Press.
- Frieden, David R. (1985). Principles of Naval Weapons Systems. Naval Institute Press. ISBN 0-87021-537-X.
- Friedman, Norman (2008). Naval Firepower: Battleship Guns and Gunnery in the Dreadnought Era. Seaforth. ISBN 978-184415-701-3.
- Pollen, Antony (1980). The Great Gunnery Scandal - The Mystery of Jutland. Collins. ISBN 0 00 216298 9.
External links
- The British High Angle Control System (HACS)
- Best Battleship Fire control—Comparison of WWII battleship systems
- Appendix one, Classification of Director Instruments
- HACS III Operating manual Part 1
- HACS III Operating manual Part 2
- USS Enterprise Action Log
- The RN Pocket Gunnery Book
- Fire Control Fundamentals
- Manual for the Mark 1 and Mark 1a Computer
- Maintenance Manual for the Mark 1 Computer
- Manual for the Mark 6 Stable Element
|date= (help)
|date= (help)
- Pages with broken file links
- Articles with limited geographic scope
- Anti-aircraft weapons
- Military computers
- Naval weapons of the United States
- Naval artillery
- Naval anti-aircraft guns
- World War II naval weapons
- Artillery of the United States
- 2Fix
- Pages with script errors
- CS1 errors: dates
- CS1 maint: Extra text
,_front.jpg){kind=link}
