Search results

• USPO1,811,523
  ...d discharges vapor during the operation of the device instead of using the inert mass of waiter in the dome and the baffling in the condenser end of the sys
  10 KB (1,722 words) - 22:09, 19 June 2010
• Arc Welding
  .... The welding region is sometimes protected by some type of inert or semi-inert gas, known as a shielding gas, and/or an evaporating filler material. The p ...ire acting as both electrode and filler metal, along with an inert or semi-inert shielding gas flowed around the wire to prevent the weld site from contamin
  22 KB (3,345 words) - 12:03, 20 June 2010
• Volkov-Yartsev VYa-23
  ...5 || Pracice round with tracer, based on the OZT but with a dummy fuze and inert filling in HE cavity.
  6 KB (851 words) - 22:07, 1 July 2010
• Carl Gustav recoilless rifle
  [[Image:MSPO2007-40.jpg|thumb|Carl Gustaf recoilless rifle ammunition ([[inert]] rounds).]]
  15 KB (2,217 words) - 16:54, 2 July 2010
• Rikhter R-23
  ...pes of ammunition''': HEI (nose fuzed), HEI (base fuzed), TP airburst, TP (inert)
  6 KB (966 words) - 21:28, 2 July 2010
• ShVAK cannon
  | Inert filled HEI shell with dummy fuze
  5 KB (647 words) - 21:30, 2 July 2010
• Type 93 torpedo
  ...me tank volume, increasing speed and range, and the absence of [[inert gas|inert]] nitrogen reduced the gasses emitted to [[carbon dioxide]], which has sign
  17 KB (2,630 words) - 21:40, 2 July 2010
• Type 98 20 mm AA Machine Cannon
  ...nert-ord.net/jap02h/t100aa/index.html '''Type 100''' AP and HE-T rounds at inert-ord.net]
  3 KB (380 words) - 21:41, 2 July 2010
• Codeine
  ...gents in combination with non-opioid analgesics, antihistamines, vitamins, inert GI agents like kaolin & pectin, mild laxatives, antacids, and herbal prepar
  40 KB (5,581 words) - 16:45, 27 September 2010
• Valproic acid
  ...ure, for many decades its only use was in laboratories as a "metabolically inert" solvent for organic compounds. In 1962, the French researcher Pierre Eymar
  25 KB (3,328 words) - 16:47, 27 September 2010
• Activated carbon
  ...temperatures in the range 600–900 °C, in absence of air (usually in inert atmosphere with gases like [[argon]] or [[nitrogen]]) *High temperature desorption and decomposition (500–900°C) under an inert atmosphere
  41 KB (5,738 words) - 16:47, 27 September 2010
• Cortisol
  * ''11-beta HSD1'' utilizes the cofactor NADPH to convert biologically inert [[cortisone]] to biologically active cortisol.
  41 KB (5,644 words) - 16:50, 27 September 2010
• Nitrous oxide
  ...are in aerosol [[whipped cream]] canisters, [[cooking spray]]s, and as an inert gas used to displace oxygen, to inhibit bacterial growth, when filling pack
  61 KB (8,728 words) - 16:50, 27 September 2010
• Richlite
  ...d phenol. Individually, these are potent chemicals, but create a harmless, inert substance when combined. The paper is soaked in phenolic resin, then molde
  1 KB (201 words) - 10:07, 20 September 2010
• Biocompatible material
  [[Surface functionalization]] may provide a way to transform a bio-inert material into a [[biomimetic]] or even [[bioactive]] material by coupling o ...s exist. [[Plasma processing]] has been successfully applied to chemically inert materials like [[polymer|polymers]] or [[silicon]] to graft various [[funct
  3 KB (341 words) - 10:07, 20 September 2010
• Sealant
  ...ed to have adequate flexibility and elongation. Sealants generally contain inert filler material and are usually formulated with an elastomer to give the re
  5 KB (633 words) - 10:07, 20 September 2010
• Ground granulated blast furnace slag
  ...ories of additions to concrete along with ordinary Portland cement: nearly inert additions (Type I) and pozzolanic or latent hydraulic additions (Type II).
  7 KB (1,001 words) - 10:08, 20 September 2010
• Refractory
  ...need to be resistant to [[thermal shock]], be [[Inert#Chemistry|chemically inert]], and/or have specific ranges of [[thermal conductivity]] and of the coeff
  6 KB (787 words) - 10:08, 20 September 2010
• Hydrogen-terminated silicon surface
  ...face' having unpassivated surface atoms, or [[dangling bond]]s. It is so [[inert]] that it can be handled in the air without any special care for several mi
  2 KB (231 words) - 10:08, 20 September 2010
• Ceramic materials
  ...ay be defined as any inorganic crystalline oxide material. It is solid and inert. Ceramic materials are brittle, hard, strong in compression, weak in sheari
  28 KB (3,876 words) - 10:08, 20 September 2010
• Liquid crystal polymer
  ...er]]s. They are extremely [[Reactivity|unreactive]] and [[Inert#Chemistry|inert]], and highly [[Flame retardant|resistant to fire]]. LCPs are exceptionally inert. They resist [[Stress (physics)|stress]] cracking in the presence of most c
  4 KB (613 words) - 10:09, 20 September 2010
• Poloxamer
  Originally thought to be inert carrier molecules work led by Kabanov has recently shown that some of these ...(2008) Pluronic block copolymers: Evolution of drug delivery concept from inert nanocarriers to biological response modifiers. Journal of Controlled Releas
  5 KB (782 words) - 10:09, 20 September 2010
• Polypropylene
  EPP is also chemically highly inert, permitting the use of a wide variety of different adhesives. EPP can be he
  25 KB (3,657 words) - 10:10, 20 September 2010
• Silicone rubber
  ...products to withstand even low imposed loads. Silicone rubber is a highly inert material and does not react with most chemicals. Due to its inertness, it i ..., making for a flexible material. Polysiloxanes also tend to be chemically inert, due to the strength of the silicon-oxygen bond. Despite silicon being a [[
  8 KB (1,198 words) - 10:10, 20 September 2010
• Polyolefin
  ...tment because they have very low surface energies. They are also extremely inert chemically and exhibit decreased strength at lower temperatures.
  4 KB (515 words) - 10:11, 20 September 2010
• Depleted uranium
  On June 21, 2009, [[Belgium]] became the first country in the world to ban: "inert ammunition and armour that contains depleted uranium or any other industria
  80 KB (11,721 words) - 10:13, 20 September 2010
• Refractory metals
  ...point above 2000 °C and are hard at room temperature. They are chemically inert and have a relatively high density. Their high melting points make [[powder ...}}</ref> In the [[Gas tungsten arc welding]] (GTAW, also known as tungsten inert gas (TIG) welding) equipment uses a permanent, non-melting [[electrode]]. T
  25 KB (3,519 words) - 10:13, 20 September 2010
• Ruthenium
  ...dic table]]; and like the other metals of the platinum group, ruthenium is inert to most other chemicals. The Russian scientist [[Karl Ernst Claus|Karl Klau
  39 KB (5,430 words) - 10:13, 20 September 2010
• Aerogel
  ...l is made from a resorcinol-formaldehyde aerogel by its [[pyrolysis]] in [[inert gas]] atmosphere, leaving a matrix of [[carbon]]. It is commercially availa
  26 KB (3,758 words) - 10:14, 20 September 2010
• Building insulation materials
  ...ing application. Does not shrink or settle. Zero VOC emission. Chemically inert (no known symptoms of exposure per MSDS). Insect resistant. Mold Proof. In ...ring application. Does not shrink or settle. Zero VOC emission. Chemically inert (no known symptoms of exposure per MSDS). Insect resistant. Mold Proof. I
  49 KB (7,250 words) - 10:14, 20 September 2010
• Insulated glazing
  ...ese gases are used because they are non-toxic, clear, odorless, chemically inert, and commercially available because of their widespread application in indu ...air spaces are used, sulfur hexafluoride is used to replace or augment an inert gas<ref>http://books.google.com/books?id=bqUxCGJd0owC&pg=PA504&lpg=PA504&dq
  28 KB (4,352 words) - 10:14, 20 September 2010
• Construction aggregate
  ...material previously used in [[construction]]. To ensure the aggregate is [[inert]], it is manufactured from material tested and characterised under European
  14 KB (1,945 words) - 10:15, 20 September 2010
• Binary liquid
  ...cial reaction or feature as a result of two [[liquid]] chemicals, normally inert or having no function by themselves, being mixed. A number of chemical prod
  1 KB (150 words) - 10:17, 20 September 2010
• Architectural glass
  ...ermal insulation and [[noise reduction]]. When the space is filled with an inert gas it is part of [[energy conservation]] [[sustainable architecture]] desi
  19 KB (2,995 words) - 10:19, 20 September 2010
• Plaster
  Lime plaster is a mixture of calcium hydroxide and sand (or other inert fillers). Carbon dioxide in the atmosphere causes the plaster to set by tra
  16 KB (2,419 words) - 10:20, 20 September 2010
• Lamination paper
  ...r'' covered with an ''overlay''. The lamination papers are covered with an inert [[resin]], often [[melamine]], which is cured to form a hard [[Composite ma
  3 KB (420 words) - 10:20, 20 September 2010
• Cold formed steel
  | [[Gas metal arc welding|Wire-fed MIG (Metal Inert Gas) welding]] | [[Gas metal arc welding|Wire-fed MIG (Metal Inert Gas) welding]]
  30 KB (4,082 words) - 10:21, 20 September 2010
• Concrete
  ...ealthier to live in than those made of wood or steel. As it is practically inert and waterproof, concrete does not need volatile organic-based preservatives A nearly inert material, concrete is suitable as a medium for recycling waste and industri
  63 KB (9,167 words) - 10:23, 20 September 2010
• Confined space
  The confined space may be purged, for example with an inert gas such as nitrogen, to clear flammable gases or vapours before work in th After purging with inert gases the confined space should be adequately ventilated, and re-tested.
  59 KB (9,427 words) - 21:30, 20 September 2010
• Ethylene oxide
  ...temperatures (typically 140–180 °C) and pressure (0.3–0.5 MPa) in an inert atmosphere, in presence of an alkaline catalyst (concentration 0.01–2%), ...> High-temperature [[pyrolysis]] (830–1200 K) at elevated pressure in an inert atmosphere leads to a more complex composition of the gas mixture, which al
  82 KB (11,709 words) - 21:31, 20 September 2010
• List of S-phrases
  *S6: Keep under ... (''inert gas to be specified by the manufacturer'')
  7 KB (1,014 words) - 21:31, 20 September 2010
• Chelation
  ...ng|mercury]], [[arsenic]], and [[lead]] by converting them to a chemically inert form that can be excreted without further interaction with the body, and wa
  13 KB (1,928 words) - 20:14, 21 September 2010
• 1,4,7-Triazacyclononane
  ...edron of metalloids and transition metals. The (TACN)M unit is kinetically inert, allowing further synthetic transformations on the other coordination sites
  5 KB (765 words) - 20:14, 21 September 2010
• BDTH2
  ...removing small traces of mercury from polluted soil, as the precipitate is inert and can be left in the soil after treatment.<ref name=Blue2008>{{vcite jour
  5 KB (664 words) - 20:16, 21 September 2010
• Le Chatelier's principle
  ===Effect of adding an inert gas=== ...]] is one that does not react with other elements or compounds. Adding an inert gas into a gas-phase equilibrium at constant volume does not result in a sh
  12 KB (1,797 words) - 20:16, 21 September 2010
• Vapor-liquid equilibrium
  ...ures of [[alkane]]s, which are non-[[Chemical polarity|polar]], relatively inert [[Chemical compound|compounds]] in many ways, so there is little attraction
  20 KB (3,239 words) - 20:16, 21 September 2010
• Equilibrium constant
  If the pressure is increased by an addition of an inert gas, then neither the composition at equilibrium nor the equilibrium consta
  22 KB (3,493 words) - 20:16, 21 September 2010
• Chemical equilibrium
  ...ution, equilibrium constants are usually determined in the presence of an "inert" electrolyte such as [[sodium nitrate]] NaNO₃ or [[Potassium per
  38 KB (5,847 words) - 20:17, 21 September 2010
• Ligand
  ...tre of a large ring. The more rigid and the higher its denticity, the more inert will be the macrocyclic complex. [[Heme]] is a good example: the [[iron]] a
  25 KB (3,607 words) - 20:18, 21 September 2010
• Spin states (d electrons)
  ...ahedral low-spin: 2 unpaired electrons, [[paramagnetic]], substitutionally inert. Includes Cr²⁺ [[ionic radius]] 73 [[picometre|pm]], Mn<sup>3+</ :Octahedral low-spin: 1 unpaired electron, [[paramagnetic]], substitutionally inert. Includes Fe³⁺ [[ionic radius]] 64.5 [[picometre|pm]].
  8 KB (1,140 words) - 20:18, 21 September 2010

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)