Fly ash brick
This article is an orphan, as few or no other articles link to it. Please introduce links to this page from related articles; suggestions may be available. (October 2009) |
This article may need to be wikified to meet Wikipedia's quality standards. Please help by adding relevant internal links, or by improving the article's layout. (October 2009) Click [show] on right for more details.
No reason has been cited for the Wikify tag on this article.
|
Fly ash brick (FAB) are building materials, specifically masonry units, containing Class C fly ash and water. Compressed at 4,000 psi and cured for 24 hours in a 150 °F (66 °C) steam bath , then toughened with an air entrainment agent, the bricks last for more than 100 freeze-thaw cycles. Owing to the high concentration of calcium oxide in class C fly ash, the brick can be described as "self-cementing". The manufacturing method is said to save energy, reduce mercury pollution, and costs 20% less than traditional clay brick manufacturing.
The raw material that is used for fly ash brick are:
Fly ash
Sand/Stone dust
Lime
Gypsum
Cement
ADVANTAGES :-
1. Due to high strength, practically no breakage during transport & use. 2. Due to uniform size of bricks mortar required for joints & plaster reduces almost by 50%. 3. Due to lower water penetration seepage of water through bricks is considerably reduced. 4. Plaster of Paris / Gypsum Plaster can be directly applied on these bricks without a backing coat of plaster 5. These bricks do not require soaking in water for 24 hours. Only sprinkling of water before use is enough.The raw material that is used for fly ash brick are: Fly ash Sand/Stone dust Lime Gypsum Cement
for more information visit http://www.ashbricks.com/ http://www.ashbricks.com/ Fly Ash Bricks manufacturer in india http://www.flyashbricksdelhi.com/