Search results

• Cole drill
  ...perated by the hand crank. Because of the pressures created, even hardened steels may be cut with ordinary HSS bits.
  4 KB (678 words) - 18:11, 19 June 2010
• Arc Welding
  ...non-ferrous materials in the 1940s, GMAW was soon economically applied to steels. Today, GMAW is commonly used in industries such as the automobile industry Some materials, notably high-strength steels, aluminium, and titanium alloys, are susceptible to hydrogen embrittlement.
  22 KB (3,345 words) - 12:03, 20 June 2010
• Creating long straight edges with hand tools
  Steels and extruded aluminum can have significant internal stress. Removing materi
  11 KB (2,080 words) - 19:59, 21 June 2010
• MK 103 cannon
  However, through a combination of lower grade steels and lighter components, the mechanism was not as strong as the MK 101. To c
  4 KB (617 words) - 20:53, 2 July 2010
• Super Quench
  This will harden otherwise unhardenable mild steels to the point they can be used as striking tools, such as chasing punches. T
  2 KB (385 words) - 12:38, 29 August 2010
• Rebar
  [[Category:Steels]]
  15 KB (2,103 words) - 10:22, 20 September 2010
• Nanophase material
  ...on has a tensile strength of around 6 GPA, twice that of the best maraging steels.[http://www.nanosteelco.com/technology/nanoscale_micro_03.html]
  2 KB (223 words) - 10:07, 20 September 2010
• Metal
  ...] and [[molybdenum]] to carbon steels (more than 10%) results in stainless steels.
  24 KB (3,311 words) - 10:13, 20 September 2010
• Martensite
  {{Steels}} ...irst to explain the cause of the widely differing mechanical properties of steels. Martensitic structures have since been found in many other practical mater
  5 KB (642 words) - 10:13, 20 September 2010
• Metallurgy
  ...n alloy system, which includes [[steel]]s and [[cast iron]]s. Plain carbon steels are used in low cost, high strength applications where weight and [[corrosi ...the dissolved alloying elements to precipitate, or in the case of quenched steels, improve impact strength and ductile properties.
  14 KB (1,922 words) - 10:13, 20 September 2010
• Refractory metals
  25 KB (3,519 words) - 10:13, 20 September 2010
• Cutting fluid
  ...pparent. (HSS retains its hardness at high temperatures; other carbon tool steels do not.) An improvement was soda water, which better inhibited the rusting
  13 KB (1,992 words) - 10:18, 20 September 2010
• Architectural metals
  Decorative steels used in buildings include: * Copper-bearing steels, containing from .15% to .25% copper, develop increased resistance to atmos
  13 KB (2,061 words) - 10:20, 20 September 2010
• Cold formed steel
  ...and Steel Institute]] ('''AISI''').The material properties of cold-formed steels, including chemical composition, yield stress, ductility, and weldability a !High-strength low-alloy columbium– vanadium steels of structural quality
  30 KB (4,082 words) - 10:21, 20 September 2010
• Stainless steel
  {{Steels}}[[Image:gateway arch.jpg|thumb|right|The 630-foot (192 m) high, stainless- ...is active and accelerates corrosion by forming more iron oxide. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which
  26 KB (3,618 words) - 10:21, 20 September 2010
• Martensitic stainless steel
  ...t hardness, but it also reduces its toughness and makes it brittle, so few steels are fully hardened. Also in 1912, [[Harry Brearley]] of the [[Firth Brown Steels|Brown-Firth]] research laboratory in [[Sheffield, England]], while seeking
  2 KB (300 words) - 10:22, 20 September 2010
• Steel
  {{Steels}} ...al Consultants|date=2006-06-28|url=http://materialsengineer.com/E-Alloying-Steels.htm|accessdate=2007-02-28}}</ref>
  44 KB (6,419 words) - 10:22, 20 September 2010
• Wrought iron
  {{Steels}}
  35 KB (5,392 words) - 10:22, 20 September 2010
• Reinforcement bar
  [[Category:Steels]]
  179 bytes (17 words) - 10:23, 20 September 2010
• Reinforcing bar
  [[Category:Steels]]
  178 bytes (17 words) - 10:23, 20 September 2010

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)