Search results

From Self-sufficiency
Jump to: navigation, search

Page title matches

  • ...is a chemical compound that, when added to a liquid or gas, decreases the corrosion rate of a [[metal]] or an [[alloy]]. The effectiveness, or corrosion inhibition efficiency, of a corrosion inhibitor is a function of many factors, including but not limited to: flui
    7 KB (1,003 words) - 10:17, 20 September 2010

Page text matches

  • ...the ''Stewart'' and ''Cavalla'' in extremely poor material condition, with corrosion and missing equipment serving as their most prominent features. In 1996, th
    15 KB (2,153 words) - 20:05, 2 July 2010
  • ...ver-content solder for the delicate welds so that these welds would resist corrosion by the ammonia. We added a pressure relief valve, rated for Ammonia visible
    8 KB (1,376 words) - 22:08, 19 June 2010
  • ==Corrosion issues== {{Main|Hydrogen embrittlement|Galvanic corrosion}}
    22 KB (3,345 words) - 12:03, 20 June 2010
  • Some cleaning formulations use potassium silicate, which also serves as a corrosion inhibitor in cosmetics. <br/>
    7 KB (1,130 words) - 17:26, 29 August 2010
  • ...bleaching fibers; in [[photography]]; as a laboratory [[reagent]] and a [[corrosion inhibitor]]; in metal coatings for phosphatizing and detinning; and in the [[Category:Corrosion inhibitors]]
    21 KB (3,046 words) - 16:45, 27 September 2010
  • Acetic acid is [[corrosion|corrosive]] to [[metal]]s including [[iron]], [[magnesium]], and [[zinc]], Concentrated acetic acid is [[corrosion|corrosive]] and must, therefore, be handled with appropriate care, since it
    41 KB (5,915 words) - 16:49, 27 September 2010
  • *[[Mercury(II) chloride]] is a very [[corrosion|corrosive]], easily [[sublimation (chemistry)|sublimating]] and poisonous s ...rAl">{{cite book |author =Vargel, C.; Jacques, M.; Schmidt, M. P.| title = Corrosion of Aluminium|year =2004| isbn = 20049780080444956|publisher = Elsevier |url
    69 KB (10,077 words) - 21:35, 20 September 2010
  • ...when used to de-ice roads, however a drawback is that it tends to promote corrosion (of vehicles) more so than sodium chloride. NaCl is also more readily avail
    19 KB (2,579 words) - 16:51, 27 September 2010
  • ...[[cast iron]] used for rebars was of very high quality, and there is no [[corrosion]] on them up to this day. The carcass of the tower was connected to its cas ...e concrete cover is able to provide a pH value higher than 12 avoiding the corrosion reaction. Too little concrete cover can compromise this guard through carbo
    15 KB (2,103 words) - 10:22, 20 September 2010
  • ...[[drywall]], etc. Desirable properties of sealants include insolubility, [[corrosion]] resistance, and [[adhesion]]. Uses of sealants vary widely and sealants a
    5 KB (633 words) - 10:07, 20 September 2010
  • ...resistance to [[chloride]] ingress — reducing the risk of reinforcement corrosion — and provides higher resistance to attacks by [[sulfate]] and other chem
    7 KB (1,001 words) - 10:08, 20 September 2010
  • ...steel by providing an alkaline environment (ph=13 in many cases) to retard corrosion of the steel. To properly protect the steel the concrete needs to cover th Carbon grids provide a corrosion resistant reinforcement that has a higher modulus of elasticity than steel
    6 KB (903 words) - 10:08, 20 September 2010
  • ...portance for the reactive transport of chloride in cement in relation with corrosion of steel reinforcement. | title = On the corrosion risk presented by chloride bound in concrete
    10 KB (1,329 words) - 10:08, 20 September 2010
  • *Highly corrosion resistant *Corrosion protection for metallic surfaces
    8 KB (1,048 words) - 10:09, 20 September 2010
  • * high chemical corrosion resistance ...ped where impact resistance in combination with rigidity, 3D design and/or corrosion resistance is required.
    6 KB (887 words) - 10:09, 20 September 2010
  • *Peter R Lewis and Sarah Hainsworth, ''Fuel Line Failure from stress corrosion cracking'', Engineering Failure Analysis,13 (2006) 946-962.
    7 KB (1,065 words) - 10:09, 20 September 2010
  • *[[Corrosion]] *[[Stress corrosion cracking]]
    8 KB (1,277 words) - 10:09, 20 September 2010
  • *[[Stress corrosion cracking]]
    4 KB (613 words) - 10:09, 20 September 2010
  • Metallurgists typically use the term [[Stress corrosion cracking]] or [[Environmental stress fracture]] to describe this type of fa
    9 KB (1,372 words) - 10:09, 20 September 2010
  • ...from [[mechanical overload]], [[fatigue (material)|fatigue]] and [[stress corrosion cracking]] if products are poorly designed or manufactured. ...als, and if under load, then cracks will grow by the mechanism of [[stress corrosion cracking]]. Perhaps the oldest known example is the [[ozone cracking]] of [
    10 KB (1,521 words) - 10:09, 20 September 2010

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)