Die grinder
A die grinder is a handheld power tool used to grind material, such as metal, plastic, or wood. They are either electrically or pneumatic powered and most have multiple speed setting; the most powerful can exceed 30,000 RPM (unloaded). The cutting is done with a burr, bonded abrasive, or coated abrasive. The cutter is usually held in a collet to allow for quick changes in cutters.[1][2]
They are commonly used for engraving, cylinder head porting, and general shaping of a part.[2] The name comes from their use in touching up hardened steel dies.[citation needed]
Safety
Most pneumatic die grinder throttles feature a spring-loaded "kickstand" mechanism between the throttle lever and the body of the grinder. This prevents the throttle from opening (being pressed down towards the body of the grinder) without operator intervention and inhibits accidental activation.
References
Cite error: Invalid <references> tag;
parameter "group" is allowed only.
<references />, or <references group="..." />| 30px | This metalworking article is a stub. You can help ssf by expanding it. |
| 40x30px | This tool article is a stub. You can help ssf by expanding it. |
- ↑ Monroe, Tom (1996), Engine builder's handbook, HPBooks, p. 27, ISBN 9781557882455.
- ↑ 2.0 2.1 Benford, Tom (2006), Garage and Workshop Gear Guide, MotorBooks/MBI Publishing, p. 87, ISBN 9780760323120.
