Search results

• Making Charcoal: Indirect by using two containers (of different diameter)
  ...then turn everything back again.). When the biomass starts pyrolysing, the gases will emit through the chink between the vessels. It is not meant as a large scale method, since the surplus gases, that could be of industrial use, are burnt and the useful heat is dissipat
  3 KB (522 words) - 18:40, 2 July 2010
• USPO1,811,523
  ...ich is intended to facilitate precipitation of moisture from the generated gases. ...top thereof to the top of the bail 1. This pipe serves as the conduit for gases evolved from the ball 1 during the generation step.
  10 KB (1,722 words) - 21:09, 19 June 2010
• USPO1,740,737
  ...he gases, as they volatilize in the evaporator -condenser receptacle, said gases pass back and are absorbed in the liquid in the generator-absorber, with th ...e 17 extends from an opening through the plate 15, which permits generated gases to pass out of the shell 7 into a closed vessel or "can" 18. From this can
  36 KB (6,093 words) - 21:12, 19 June 2010
• Arc Welding
  ...or fast welding of non-ferrous materials but requiring expensive shielding gases. Using a consumable electrode and a carbon dioxide atmosphere as a shieldi ...ngerous if ventilation is inadequate. Furthermore, the use of compressed gases and flames in many welding processes pose an explosion and fire risk; some
  22 KB (3,345 words) - 11:03, 20 June 2010
• Casting materials
  ...lay clinging to bind it for a good casting and still allow free passage of gases to flow through such as steam. <br/>
  2 KB (339 words) - 20:16, 22 June 2010
• Wood gas generator
  ...bon dioxide in the engine (or other application) along with the other fuel-gases; however, continuous exposure to carbon-monoxide can be fatal to humans eve
  11 KB (1,818 words) - 18:04, 24 June 2010
• Methane Digester Experiments
  ...weight to it to keep the pressure up so I assume we can do this with other gases. The only reason I see for compressing the gas is to put more in less space
  7 KB (1,320 words) - 14:15, 25 June 2010
• AT4
  ...[inertia]] of the [[projectile]] is balanced by the mass of [[propellant]] gases ejecting from the rear of the barrel. But unlike the Carl Gustav, which use ...proper amount of gases to be vented to the rear, balancing the propellant gases pushing the projectile forward.
  23 KB (3,570 words) - 19:53, 1 July 2010
• 7,62 ITKK 31 VKT
  ...uzzle climb, was solved by modifying the muzzle brake to direct propellant gases only upwards, thus providing a force to counteract the muzzle climb from re *Conical muzzle break with openings to direct propellant gases upwards
  10 KB (1,389 words) - 21:38, 1 July 2010
• United States 40 mm grenades
  ...tem to force the grenade out of the cartridge, but keep the propellant and gases contained. While this did reduce the effective range of the projectile it
  15 KB (2,431 words) - 21:58, 1 July 2010
• Dahlgren gun
  ...etal in the gun breech where the greatest pressure of expanding propellant gases needed to be met to keep the gun from bursting. Because of their rounded co
  29 KB (4,428 words) - 18:21, 2 July 2010
• GAU-8 Avenger
  ...A-10 engines were initially susceptible to [[flameout]] when subjected to gases generated in the firing of the gun. When the GAU-8 is being fired, the smok
  14 KB (2,240 words) - 19:12, 2 July 2010
• Gryazev-Shipunov GSh-301
  ...steel bolt through the side wall of the 30mm cartridge. The hot propellant gases following the bolt into the dud 30mm round ignite the powder charge of that
  4 KB (576 words) - 19:15, 2 July 2010
• MK 108 cannon
  ...again from the rear end of the chamber. Before this happened, most of the gases had escaped via the barrel, dropping the chamber pressure to a safe level.
  10 KB (1,518 words) - 19:53, 2 July 2010
• Nagant M1895
  ...also presents a path for the escape of high-pressure and high-temperature gases from behind the bullet. ...ue, plays an important part in sealing the gun to the escape of propellant gases. The bullet is deeply seated, entirely within the cartridge case, and the c
  9 KB (1,361 words) - 20:04, 2 July 2010
• Nudelman N-37
  ...only 400 rounds per minute. The weapon's considerable [[recoil]] and waste gases were problematic for [[turbojet]] [[fighter aircraft]], as was finding spac
  2 KB (356 words) - 20:06, 2 July 2010
• Oerlikon 20 mm cannon
  ...n on the moment of fire, but moves freely to the rear while the propellant gases propel the projectile forward. To make sure that the projectile has left th
  14 KB (2,312 words) - 20:07, 2 July 2010
• Rheinmetall RMK30
  ...ing variable rates of fire of up to 300 rounds/min. Part of the propellant gases is ejected to the rear of the cannon, compensating for the recoil and allow
  4 KB (397 words) - 20:28, 2 July 2010
• Rikhter R-23
  ...rated to penetrate the side wall of the R-23 cartridge. The hot propellant gases of the pyrotechnical cartridge follow the bolt into the dud R-23 cartridge
  6 KB (966 words) - 20:28, 2 July 2010
• Hydroelectric
  ...o this project, hydroelectricity produces the least amount of [[greenhouse gases]] and [[externality]] of any energy source<ref name="ExternEGraphs">{{cite
  39 KB (5,447 words) - 22:02, 2 July 2010

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)